Sleeve bearings - Import export

Elastomer sleeves are available on request for Franke LSA slim bearings. They are used for tolerance compensation and for vibration decoupling. The smooth running can be significantly increased by an elastomer sleeve. Elastomer sleeves for the LSA 6/8 also offer additional sealing of the bearing due to the overlapping of the edges. Elastomer sleeves for Franke slim bearings are available from stock. They can be ordered when you buy a slim bearing and are then included in the delivery. For series production, elastomer sleeves are available by the meter for self-cutting. We recommend gluing the ends with cyanoacrylate glue (e.g. Loctite 406). The use of the elastomer sleeve slightly reduces the stiffness and accuracy of the bearing. The basic static load rating of the bearing also decreases slightly. We would be happy to advise you on the design and construction.

FX-C lifting magnets have a round, multipole clamping surface, designed for lifting rings, sleeves, bearing housings, flange plates and similar workpieces.The load specification is valid for full-surface mounting on workpieces which cover D inside to D outside (see table Dimensions), for workpieces with a smaller mounting surface an approximate maximum workpiece weight of 3.5 kg per cm² clamping surface can be calculated. For serial workpieces, a documented test should confirm the safety factor 3.

As the need for fans that are used in applications subject to high temperatures is constantly on the increase, SEPA EUROPE is presenting its latest sleeve bearing fan equipped with MagFix technology that can be used for operating temperatures up to 85 °C. An added advantage is the extraordinary high life expectancy of 210.000 h (MTBF). This fan is not only available in the standard sizes but also as a tailor-made solution. With the high operating temperature of up to 85 °C, this innovative fan generation by SEPA EUROPE opens up a wide range of new applications for the user, not least the automotive sector. The term MagFix stands for magnetic fixation (positioning) of the fan propeller/rotor in sleeve bearing fans.

One of the most popular SEPA EUROPE fans is the axial fan with the dimensions 40x40x10 mm and the popular Magfix® sleeve bearing. This year it underwent complete revision and further development. The new fan generation is known as the LF40P and with the same external dimensions is installed in the same way as the previous model. The new and currently unique rotor geometry is obvious at first sight. It is completely different from the previous shape and layout. Thanks to the distinctive rotor blade with a cut, either a clear noise reduction can be achieved at the same speed or the same noise level as previous generations with 25% more air performance. The current model is equipped with the SEPA MagFix® bearing and PWM input with which the speed can be set to meet the necessary requirements. The LF40P is an excellent example for the permanent further development of products at SEPA EUROPE.

The fan and cooling specialist SEPA EUROPE has now added three further models to its slimline radial fan series. The latest additions impress with their compact dimensions of 38 x 40 x 5 mm, 54 x 52 x 6 mm and 45 x 45 x 4 mm and have more than deserved the name „slimline“. All fans are equipped with the reliable Magfix sleeve bearings and have a service life of 210 000 h (MTBF) and 40 000 h /L10) at 40 °C. The PWM input in combination with the tacho output enables the speed to be controlled and monitored. It is not obvious at first glance, but the Model HY45AB05PNK00A tops with a pressure of 143 Pa. The new models will be included in the standard range and will therefore be available shortly from stock. SEPA EUROPE specializes in customized cooling solutions. Thanks to over 25 years of experience, SEPA EUROPE can offer you the appropriate solution for virtually every task.

The new super flat active chip cooler of the cooling specialist SEPA EUROPE is a convincing solution for applications in the embedded computing sector, in particular for single board computers. The HZ25B05 with its dimensions of 25x25x6.5 mm can be installed even in flat applications and ensures highly effective heat dissipation. The size of this super flat design is not its only advantage, but also its exceptionally low noise level. The heat sink is made of high-purity aluminium and has low thermal resistance. The integrated micro fan is also equipped with a special, highly durable MagFix® sleeve bearing designed for operating temperatures of up to 80°C. Particularly noteworthy is the fact that the micro fan which is operated with a voltage of 5VDC, has a power input of only 0.3 W and a life expectancy of 400000 hours. The fan can also be equipped, if necessary, with a tacho output for monitoring the function. Both and the fan and the heat sink are available separately.

The significance of air quality measurements whether in industry, households or in vehicles is constantly increasing. Manufacturers therefore, should equip their applications with the optimal sensor fan and in this respect SEPA EUROPE is exactly the right partner! SEPA EUROPE has complemented its range of microfans with the radial fan HY20A with the dimensions of 20 x 20 x 6.3 mm. The air intake of the radial fan which is on one side is 2 l/min and with a sound pressure level of 5dB(A) at a distance of 1m, it is virtually inaudible. As is the case with all microfans, the HY20A is equipped with the reliable Magfix sleeve bearing and has a service life of 400 000 h (MTBF) or 50 000 h (L10) at 40°C. The tachometer output constantly monitors the speed at which the fan is running. The HY20A is also an interesting solution for the cooling of hot spots in embedded applications. This compact blower ensures that optimal use is made of limited installation space.

By mounting an axial fan, the effectiveness of the new Kühligel® can be increased considerably. Fanless solutions require a lot of space. They are heavy and expensive. For cooling with active coolers by SEPA EUROPE however, the new Kühligels are not only small and light but also extremely inexpensive. Thanks to intensive development work, SEPA EUROPE was able to construct a heat sink that enables fan mounting without extensive reworking using conventional screws. The choice of the suitable fan (size, sleeve or ball bearings, 5, 12, or 24 VDC, tacho, connector) enables the best possible combination that is required for the application in question. The fans used have a MTBF of up to 350000h (40°C) and thus meet the highest requirements. Thanks to its light weight, the Kühligel® can usually be mounted using double-sided adhesive heat conduction pads (TCTxx) or thermally conductive two-component adhesive (Hernon 746) which are both available from the SEPA EUROPE product range.