Signals - Import export

for position transducers series LWH und TLH. Electronics integrated inside the connector housing. Zero point and span optionally adjustable or fixed.

for potentiometric and other sensors with analog interface. Highly accurate, display up to 4 1/2-digits . Programmable m ode, scaling, limit value, zero point and tare. Selectable analog and digital interfaces.

The newly developed sensor PROFIBUS module model 9221 is predestined for the integration of various analog sensor output signals into complex, net worked and peripheral automation structures. This module finds its fields of application in the industrial automation technology as well as the test rig technology based on its secure and reliable transfer mode, the fast transfer speed and its simple construction. The inputs (e.g. PLC signal gauge) and outputs in addition to the external control allow a zero compensation by trigger via proximity switch or fast alerting on passing of set point values. Industrial type connection and mounting techniques enable the user the adaption and integration in the existing mechanical and electrical environment. The excellent quality of measurement together with the high grade capture of mean values also enable the application in research and development. The use of standardized PROFIBUS protocols makes the connection an easy task for the programmer.

The amplifier module model 9243 is used wherever measurement signals from strain gauges, potentiometric sensors or DC/DC sensors have to be converted into standard signals. Simply by mounting on conventional DIN-mount rails, it is possible to position the amplifier module on location, in the proximity of the sensor. Especially for rough environments a IP65 version is available. The broad auxiliary power range and the choice between AC or DC permits operation on standard power supplies used in switch gear cabinets. A highly precise reference voltage source is built-in for calibration purposes. A calibrating shunt can also be connected via two separate terminals. This permits deliberate detuning of a strain gauge sensor for calibration or merely to check the measuring chain.

Situations often occur in practice in which it is necessary to place a measuring amplifier immediately in the neighborhood of the sensor in order to be able to access a standard signal there. In this way, long distances to the evaluating electronics can be covered. This task can ideally be performed by the 9236 in-line measuring amplifier. With its high degree of protection (IP67) its singlechannel version can be integrated into the application even in the tough environment outside the switch gear cabinet. — Automatic production machinery — Laboratory measurements — Integration into customer‘s circuit boards — Field measurements Features: — Operates with up to 4 measuring channels — Voltage output 0 to ± 5 V / 0 to ±10 V — Protected against reverse connection and short-circuit — Also available as circuit board without housing — Simple configuration using DIP switch — High degree of protection up to IP67

Adjustable pressure switch type PR as a robust standard model in the pressure range 1 - 10 bar. For converting pneumatic signals into electrical signals. Please also note our separate pressure/temperature/level product range.

for potentiometric sensors. Basic version with fixed output range, voltage or current output

The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems. A factory calibration certificate or German-accredited DAkkS calibration certificate can optionally be provided for the USB interface plus relevant sensors, ensuring compliance even with the stringent traceability requirements of quality assurance standards. Specific characteristics: —Cost effective "Plug&Measure" concept —24-bit resolution —Practical and convenient DigiCal calibration and data acquisition software —Pt100 as option —Free LabView driver DLL for integrating in your own software environment —Multipurpose reference measurement chain with optional factory calibration certificate or Germanaccredited DAkkS calibration certificate —6-wire connection technology

for potentiometric and other sensors with analog interface. Cost effective, various programming possibilities, (input dimension, scaling, limit values, zero point, tare etc.). Selectable analog and digital Interfaces. Useable also as data logger due to internal data recording ability.

for potentiometric sensors. Electronics inside robust housing even for outside use. Z ero point and span adjustable.

for position sensors series AW360 and AWS360. Zero point and span adjustable, additional supply +/- 15 V for connected sensors.

for potentiometric sensors. Simple teach-in function to adapt start and end point. Switchable current or voltage output .

for potentiometric sensors. Adjustable zero and span. Available with or without electrical isolation. Compact size.

The MSK320R contains two sensor elements and two signal conditioners, therefore providing two independent output signals A1. A2. B1 and B2 as well as the associated inverted signals  /A1. /A2 /B1 and /B2. Combined with a safe input card, the sensor can be used in the overall system up to Performance Level PLd. Enhanced safety owing to independent output channels. 2 magnetic sensors and 2 signal conditioners in one sensor head. Small, space-saving housing. Reading distance ≤2 mm. Repeat accuracy of ±1 increment. Great application temperature range of  -40 … 85° C. Optionally available with Deutsch connectors. Cost advantage by installation of one MSK320R sensor instead of two MSK320 sensors.

The SENSORMASTER 9163 covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via USB, RS232 or analog output. Features: — For force, pressure or torque measurements using strain gauge sensors — For position or angle measurement using potentiometric or DC/DC sensors — For temperature measurement using Pt 100 sensors or thermocouples — Optional multi-channel model — Optional Profibus or serial interface — 0.1 % measurement accuracy plus sensor-specific linearization — Range of mathematical functions (e.g. differential measurement) — OK/NOK feedback on multi color display and via 4 alarm limit outputs — High sampling rate (500/sec.)

The 9163 process value indicator covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via PROFIBUS, RS232 interface or analog output. The multi-channel version can be used with up to four sensors. These sensors can be combined using mathematical functions, so that even complex measurement tasks can be performed with just the one instrument. Visual alarms on the display make it easier and more convenient to assess when values lie off-limits. Up to four configurable outputs are available as relay or logic outputs. The excellent measurement accuracy of 0.1% also makes this instrument suitable for high-precision applications.

Simultaneous speed / torque display universally applicable sufficient for many measuring tasks 11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm Very short Broad input voltage range Current output and voltage output Measurement accuracy: ≤ 0,5% of full scale Torque ranges from 0,5 to 1000 Nm Contactless transfer of measurement signal Proven strain gage technology Integrated signal amplifier Single power supply Multipurpose use Simultaneous speed/torque indication 4-segment display with sign Peak mode (clockwise only) Indication area on LCD display 30 x 11 mm Speed indication updated 1x sample/second Torque updated 1,000 samples/second

This is a substrate for Immunofluorescence, enabling a highly sensitive detection of cellular surface antigen expression. A highly sensitive CLAMP method (quinone methide-based catalyzed signal amplification) can be applied to live/fixed cells or tissue sections. In this method, using ?-galactosidase-labeled secondary antibody and newly developed fluorescent dye CLAMP F405, the cells expressing a specific cell surface protein are selectively and highly sensitively stained.

HAWKE Ex-connector InstrumEx's design allows the live mating and de-mating of signal and low power in hazardous areas safely and quickly. It is suitable for Ethernet applications and it can be installed into Ex d enclosures or Ex e junction boxes. Materials: Nickel-plated brass, Stainless Steel 1.4404, V4A, 316L Types of Protection: Ex db eb IIC, Ex tb IIIC Db T85 Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. 1-9 Pins Cross section from 0,14 to 2,5 mm² Maximum voltage 250 V Maximum power 10 Ampère Temperature range: -40 °C / +60 °C Protection grades IP66, IP67, Deluge Protected DTS01

The miniature connectors of the CGK series for signal transmission are ideal if limited space plays an important role. When the installation situation does not allow for expansion, the CGK series provides a higher contact density than in the VG95328 series by miniaturisation: from 2 to 128 contacts. An additional bonus is the low weight as aluminium is used for the hardware. Thus it provides good connections in military and civil aviation as well as in test and communication applications. Available in shielded and unshielded versions as well as in RoHS and non-RoHS compliant surface platings.

Normally two separate connectors are used for power and signal lines for servo drives. The new reduced size connection system from ITT Cannon combines power and signal lines into one zinc die-cast housing. This reduces the number of individual components as well as the cabling time and costs are cut. The innovative design simplifies the assembly and is a plus factor compared to the solution with circular connectors, with 50% less weight and size. For these reasons it is the ideal connection system for applications where there is not much space available. The CmX series fulfils all requirements according to DIN EN 61984. There are three sizes: Cm2, Cm3 and Cm5 with 16 up to max. 30 contacts.

TEVISIO supports demanding viewing tasks with ergonomic perfection. Whether in the electronic, metal or watch sector, whether in assembly, workshop or inspection: TEVISIO is essential wherever demands on viewing are highest. With its highly developed LED technology, innovative arm technology and a field of vision ideally matched to the distance to the eye, the TEVISIO magnifier luminaire offers optimum efficiency and ergonomics at the workplace. • For strong, large-area and uniform lighting • Good contrast viewing and very good colour recognition • Continuous dimming • Variants with segment switching (visualizer function) for detecting very fine structures and errors • Robust aluminium housing • Absolutely scratch-proof magnifying glass, optionally antireflective or with additional lens • Large field of vision for distortion-free viewing • Approximately double magnification • Uniquely mobile and balanced arm with vast radius of action • Also available in ESD design

• Performance level for highest lighting demands • Optimised ratio of direct to indirect light for standard-compliant, even illumination of large lighting calculation surfaces • Easy-to-reach, multifunctional operating element • Adjustable angle of inclination of the standpipe • Human centric lighting VTL for office workplaces

This may sound contradictory: The ABL is so small because it performs an essential task. With its compact dimensions and its integrated ball joint, it directs light to places where it seems almost impossible, but where it is urgently needed. • Maintenance-free LED technology • Strong high-power LED for maximum light • With narrow- or wide-beam illumination characteristic, as desired • Robust aluminium housing with solid safety glass screen • High degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Integrated ball joint

It is not only the shape and variety of colors that make PARA.MI so impressive, it also comes with a number of practical functions. The luminaire head can be pivoted and turned, while the distinctive self-locking joints are continuously flexible and completely maintenance free. • A bright LED module in different light colors creates homogeneous, wide-angle task lighting with a maximum consumption of just 7 W • Specially developed reflector for glare-free working • Switching and dimming with memory function via easily accessible control button in the luminaire head • Automatic cut-out and switch-on behavior can be adjusted • Flexible connection possibilities for furniture systems • Can be chosen with easily adjustable single or double arm

With its minimalist design, the ABL is as small and handy as a mini flashlight that can be fixed in any position. The fact that it is extremely tough in spite of its delicate appearance makes it a highly versatile luminaire. • Maintenance-free LED technology • Strong high-power LED for maximum light • With narrow- or wide-beam illumination characteristic, as desired • Robust aluminium housing with solid safety glass screen • High degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Exactly adjustable flexible tube

RING LED is the solution for tasks involving miniature parts. When miniature parts need to be inspected or precisely processed at an industrial workplace, attention to detail is vital. RING LED has the perfect lens – and with its 63 LEDs also the optimum light to meet these requirements. Additional advantage: The luminaire also has an attractive appearance. • Maintenance-free LED technology • Low-distortion magnification right to the edge • Continuous dimming • Hard-coated plastic lens • Exactly adjustable flexible tube • Low space requirements

This machine tests turn signals and installs with positive validating a frame cover.

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).