Scanners - Import export

For 1D linear barcodes, higher-density 2D matrix codes, or direct part mark (DPM) codes, the DataMan 150/260 series fixed-mount, image-based barcode readers deliver unprecedented performance, flexibility and ease-of-use. DataMan 150/260 series fixed-mount barcode readers achieve the highest possible read rates thanks to a high-speed, dual core processing engine that runs the latest Cognex algorithms. 1DMax with Hotbars and 2DMax with PowerGrid technology decode damaged or poorly printed 1D and 2D codes, despite code quality, printing method or surface that the codes are marked on, and can even read 2-D codes without visible perimeters or quiet zones. DataMan 150/260 series models offer straight or right-angled configurations to fit into the tightest spaces.

The DataMan® 8072 DPM Lite (DL) handheld barcode reader delivers powerful barcode reading performance for tough DPM codes on flat, highly reflective surfaces. It features the latest patented technology and advanced lighting and optics, ideal for automotive, aerospace, and medical device industry applications. DataMan 8072DL handheld barcode readers are optimized with powerful algorithms and technologies to read DPM, as well as 1D and 2D label-based barcodes, in the most demanding industrial environments. 2DMax® with PowerGrid® technology is a breakthrough 2D decoding algorithm, designed to read 2D codes with significant damage.

The Z+F PROFILER® 9012 M has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction.A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

The Z+F PROFILER® 9012 A has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction. A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

The Z+F PROFILER® 9012 has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction. A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

The Z+F PROFILER® 9020 and 9020-2 is a highly efficient 2D laser scanner for mobile mapping applications. The rotation speed of the Z+F PROFILER® 9020 is 267 Hz or 16,020 rpm max.. It measures up to 182 m and has a very high data quality. For data capturing in close range, it is equipped with special optics. Compared to previous models, it has an internal reference plate, a very low power consumption, very fast startup time and over 50% reduced weight and size. A new, very powerful laser technology and further developed algorithms ensures highly accurate measurement results on rails, roads, street signs and other traffic control systems such as traffic lights. Technical highlights: 267 profiles/sec. P9020: 1.094 million points/sec. P9020-2: 2.188 million points/sec. 0.2 mm accuracy 182 m range 360° field of view The Z+F PROFILER® 9020 and 9020-2 can be flexibly integrated into different MMS

The Z+F PROFILER® 9020C is the world's first mobile 2D laser scanner with integrated cameras. Generate colored point clouds without external cameras The P9020C has four integrated cameras, each with 5 MPx, which cover the entire 360° scanning area as of a distance of 40 cm. The recordings have high color fidelity and a high dynamic range. Significant differences in light conditions are compensated in such a way that the processing of the images afterwards takes short time or is completely eliminated. Shaded or overexposed areas can hardly be seen in the colored 3D representations. Less cabling and connection effort - only one USB 3 cable required The P9020C's built-in cameras allow for quick installation. Only a USB 3 cable is required for the transmission and control of the system components. Fewer cables also mean less susceptibility to errors and, conversely, more security when collecting data.

Based on the high quality laser scanner Z+F IMAGER®, Zoller + Fröhlich GmbH and DMT GmbH & Co. KG have developed an explosion proof 3D laser scanner. The Z+F IMAGER® 5006EX pioneers surveying in underground mining and industries where explosive atmospheres occur. The Z+F IMAGER® 5006EX is the world´s first ATEX approved 3D laser scanner for use in mining and industrial applications under explosive conditions.The Z+F IMAGER® 5006EX is class I and class II approved according to ATEX directive 94 / 9 / EG. The ATEX directive 94 /9 / EG "Equipment and protective systems intended for use in potentially explosive atmospheres" is a European standard. The ATEX approval for this equipment is widely accepted outside the European community as well.

The terrestrial 3D laser scanner Z+F IMAGER® 5016A combines compact and lightweight design with state-of-the-art 3D laser scanning surveyor technology - allowing the user to reach new levels. It's equipped with an integrated HDR camera, internal lighting and positioning system. All components of the terrestrial 3D laser scanner have been further developed and adjusted to the new design, resulting in even better scanning results and a more efficient workflow. With feature A, which stands for Advanced, the 5016 receives twice as high scan rate of up to 2.187 million pixels/second and more options for leveling the scanner. If the dynamic compensator is deactivated or the tilt is outside the defined range, the tilt is detected by the IMU of the Z+F IMAGER® 5016A.

The Supersmart Scan & Go loss prevention system consists of intelligent hardware components and Artificial Intelligence (AI) based software which optimizes your checkout times and processes at the point of sale and drastically reduces sales losses resulting from shrinkage. Supersmart eliminates queues, makes the shopping process more convenient and reliable, increases customer satisfaction and loyalty.

For conductor cross-sections from 2.08 – 10 mm² (AWG 14 – 8). Material: tin-plated copper.

Due to many successful projects we possess a wealth of experience in this field. In the following a selection of applications: special machinery, textile industry, automotive industry, aviation industry, special equipment manufacturing, packaging industry, power and drive technology, machine and plant engineering as well as shipping industry.

State-of-the-art manufacturing techniques are used in our electrical workshop. The world-renowned and appreciated Z+F machines are used for wire processing. These assure a high quality standard of the final product and allow great time savings in the manufacturing process. Thereby we can offer our customers a good and fair price-performance ratio. Individual marking of wires is supported. UL approvals are also possible.

Our in-house paint shop offers many advantages to our customers. Desired colors can be applied quickly and thus we can offer a high degree of flexibility.

Our metalworking shop allows us to realize customized housings according to customer requests. A team of experienced employees assures the necessary precision including all required cutouts and drillings of housings. Our own tool shop is equipped with machines for lathing, milling, electrical discharge machining and grinding which allow us to quickly manufacture customized parts/adjustments in-house.

Programming is completely done in-house according to DIN EN 61131-3. The preferred programming languages used are either Siemens’ Step 7 or 3S’ CodeSys. The hardware depends on the application: it ranges from miniature control systems to computer solutions with connections to the office world in order to document the manufacturing process ideally. By working closely together with our customers we attain individual use of technological possibilities.

For conductor cross-sections from 0.14 up to 240 mm² (AWG 26 – 500 kcmil). Material: tin-plated copper. Tolerances according to DIN 46228 part 1

For conductor cross-sections from 0.5 up to 2.5 mm² (AWG 20 – 14). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

For conductor cross-sections from 0.34 up to 2.5 mm² (AWG 22 – 14). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

For conductor cross-sections from 1.5 – 16 mm² (AWG 16 – 6). Material: tin-plated copper.

For conductor cross-sections from 0.34 – 1.5 mm² (AWG 22 – 16). Material: tin-plated copper

For conductor cross-sections from 0.34 – 1.5 mm² (AWG 22 – 16) and 35 mm². Material: tin-plated copper.

For conductor cross-sections from 2 x 0.34 up to 2 x 10 mm² (AWG 2 x 22 – 2 x 8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

For conductor cross-sections from 2 x 0.34 up to 2 x 16 mm² (AWG 2 x 22 – 2 x 6). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

For conductor cross-sections from 0.14 up to 10 mm² (AWG 26-8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4