Results for
IDG-DICHTUNGSTECHNIK GMBH
Germany
Design of the housing in the form of a groove should be avoided if possible. If this is not feasible, good housing and seal cleanability must be guaranteed. The hygienic design requirements can be met by having a particularly large groove base radius, avoiding notches and having a split housing. For WIP/WOP cleaning it is important to be able to remove and replace the seal without damaging it. Given a suitable machine design, cleaning in place is also possible.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
The main applications are liquids at very high pressure. This seal can also be used for gases if the maximum operating parameters are restricted.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy.The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
These sliding rings are the solution for designs which only allow room for a small or low housing, but require an operating pressure up to 80 Mpa. They are ideal for retrofitting into existing O‑ring grooves
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
The tandem configuration of type 116 allows static pressure maintenance in the critical unpressurized range and at low pressure. The security of this function is guaranteed by use of the IDG materials U95, U96 or U99 on the low pressure or atmospheric side.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
The Zurcon® U-Cup has a very high sealing performance with lower friction and lower heat generation than standard U-Cups. The special shape of the trimmed lips allows for outstanding wear and extrusion resistance. Compatible with virtually all media, it also has a wide operating temperature range.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
The Zurcon® U-Cup has a very high sealing performance with lower friction and lower heat generation than standard U-Cups. The special shape of the trimmed lips allows for outstanding wear and extrusion resistance. Compatible with virtually all media, it also has a wide operating temperature range.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
Double Delta® combines the flexibility and response of O-Rings with the wear and friction characteristics of the Turcon® materials in. The double acting performance of the seal follows from the symmetrical cross section which allow the seal to respond to pressure in both directions. Initial contact pressure is provided by radial compression of the O-Ring. When the system pressure is increased the O-Ring transforms this into additional contact pressure, the contact pressure of the seal is thereby automatically adjusted so sealing is ensured under all service conditions.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
POLYPAC® - Veepac is a set of fabric reinforced Chevron rings comprising of a support ring , sealing rings and a pressure energising ring . In the packing set the energising axial force is transferred between the individual packing rings so that each ring is pressed into positive contact with the rod surface. Additional to the standard material special material grades are available for a large variety of working conditions.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
The POLYPAC® - Balsele is a compact rod seal consisting of an elastomeric sealing element and an integrated fabric reinforced base. Due to the radial pre-load an excellent sealing performance will be achieved even at low pressures. The fabric reinforced base prevents the seal from extrusion.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
A single-acting rod seal, Zurcon® L-Cup® is an alternative to the U-Cup. It is a highly effective sealing system offering optimized sealing performance and extended service life. With exceptionally low friction properties, it has high wear resistance, back pumping ability along with high static and dynamic tightness.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
In heavy duty applications, leak free performance and high service life cannot be assured by a single sealing element; therefore, specially developed ”system seals” are arranged in series, building a ”tandem configuration”. Each sealing element in a system has its specific function and their interaction needs to be secured to get a redundant sealing system. The primary seal in Zurcon® material has an excellent wear and extrusion resistance under extreme working conditions. It allows a fine lubrication film passing this first barrier, ensuring the necessary lubrication of the secondary sealing element for long service life. The ”tandem arrangement” requires an outstanding back-pumping ability of the primary seal and the secondary seal, if a double acting scraper is installed.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
The double acting Turcon® Glyd Ring® is a combination of a Turcon® based slipper seal and an energising O-Ring. It is produced with an interference fit which together with the squeeze of the O-Ring ensures a good sealing effect even at low pressure. At higher system pressures, the O-Ring is energised by the fluid, pushing the Turcon® Glyd Ring® against the sealing face with increased force.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
The Turcon® Glyd Ring® T is a double-acting O-Ring energized rod seal for dynamic applications, offering low friction with no stick-slip, minimal break out force and high wear resistance. The trapezoidal cross-section of the Turcon® Glyd Ring® T provides very good static leak-tightness and the angles of each lip are designed to provide improved leakage control and better resistance to extrusion.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
Turcon® Variseal® W2 is a single-acting rod seal consisting of a U-shaped jacket and a corrosion-resistant Slantcoil® spring. The advantage of the seal lies in its low friction and relatively constant preloading force over a large deformation range. Suitable for reciprocating and light duty rotary movement, it is often interchangeable with an O-Ring and Back-up Ring.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
A single-acting sealing element comprised of a U-shaped Turcon® ring and V-shaped metallic energizing finger spring. Suitable for reciprocating and light duty rotary movement. Compatible with most fluids and chemicals and efficient in a wide range of temperatures, it offers low friction with no stick-slip, minimal break out force and high wear resistance.
Request for a quoteSEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
A single-acting rod seal energized by an elastomer O-Ring, the Zurcon® Rimseal provides high static and dynamic leak tightness. Acts as a suitable secondary element to ensure reliable sealing of thin oil films at low secondary pressures. Easy installation and high wear resistance.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SEALS-SHOP.COM - TRELLEBORG SEALING SOLUTIONS
Germany
This single-acting O-Ring energized rod seal is made of Turcon® and provides high static and dynamic sealing results. Can be installed together with other seals in a tandem configuration for advanced static and dynamic tightness. The Turcon® Stepseal® 2K offers high extrusion resistance, low friction with no stick-slip, minimal break out force and high wear resistance.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Elastomeric wipers/scrapers are used in combination with the MANOY® sliding ring, the MANOY® U‑Cup or other rod seals.
Request for a quoteResults for
Rod seal - Import exportNumber of results
20 ProductsCompany type
Category