Removal - Import export

The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 1,5 m hose and hand nozzle. Product attributes: - Connection motor and pump via quick-action coupling - Sealless in the liquid area - Small outer tube diameter - Holding hook for hand nozzles at the pump discharge - Low weight Benefits: - Motor easy to remove - Several pumps can be operated in series with one motor - Also suitable for filling smaller quantities - Can transfer from narrow-necked and containers difficult to access - Minimal force required to change drums - Hand nozzle always quickly at hand due to holding hook - Low storage space required

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. . Exchangeable, powerful battery with Li-Ions . Battery life 35 min at maximum speed . 1 battery charge empties approx. 12 x 200 litre containers . BLDC Motor with high efficiency up to 70% . infinitely variable . high battery life . automatic shutdown in case of overload . sophisticated quick release * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. *Optional impeller or rotor shape * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

Application: Cell cultrue Product group: Media : Peptone CAS-Nr.: [68990-09-0] Storing temperature: 10-25°C EINECS: 273-578-7 Shipping condition: ambient Appearance: Tan-colored free flowing fine powder UNSPSC-No: 12352205

Product group: Dyes CAS-Nr.: [85138-49-4] GHS pictogram: GHS07 Shipping condition: ambient MW: 520.44g/mol Formula: C27H20O11

The PP1 chips collector is used for the rapid collection of shavings and other metal parts, for cleaning the workplace, the machine or for the collection of metal parts from waste or ash. The collected metal parts can be removed by pulling the rear release button. Magnets for surface and railing cleaning clean halls and outdoor areas from magnetic parts and thus protect personnel and equipment

Mold Cleaner 40-1015 Lemon dissolves pollutions like: oils, greases, waxes and resins, even cured ones. Mold Cleaner40-1015 Lemon will remove the sealer form mold surfaces. Mold Cleaner40-1015 Lemon does not evaporate. Residues have to be cleansed with a quick cleaner (e.g.: fluid 010, Cleaner ES). A removal with water is also possible.

It is now possible to manufacture removable labels eben for critical surfaces without any compromises regarding visual and physical durability. For that purpose, HERMA has developed a special range of adhesives that is suitable for many substrates. It allows labels to reliably perform their task, after which they can be easily removed.

We offer a variety of special processes for removing i.a. arsenic, uranium, antimony, micropollutants and so on. Talk to us we will find a solution for your problem!

A third category of membranes is used for degassing liquids. When applying a vacuum to one side of the membrane, the liquid itself is not permeable and there is no loss. One typical application is removing dissolved oxygen from brewing water in order to avoid any oxidation processes.

We offer customdesigned systems for large throughputs or standard units for low ones. We work with different techniques such as softening, demineralization, complete desalination and decarbonisation. ion exchange can be used for the nitrate exchange or nitrate removal. Furthermore, humic substances can be removed reliably using an ion exchanger.

Quality, ergonomics and power are the core features of the new Cleco® Vertical Grinders. For grinding applications requiring maximum material removal, as e.g. heavy roughing work, the new powerful Cleco® Vertical Grinders with 2300W or 3100W motors are THE solution. Engineered for the most serious heavy-use industrial applications, the new Cleco® Vertical Grinders are built to deliver unmatched productivity, maximum material removal and long service life. - Powerful 2300W and 3100W motor engineered for maximum sustained power - Robust one-piece all metal housing and powerful long-life motors - Ultimate reliability and ruggedness - Reduced weight and height (175 / 208 mm; 4,4 - 5,4 kg) for improved ergonomics - Low maintance and longer user “up time” - Streamlined 1 piece all metal housing and handles are engineered for ultimate ruggedness and best ease of use - High versatiliy through 180°reversible throttle handle and interchangeable guards (150mm, 180mm, and 230mm)

SMiTO TECHNIC is highly specialized in the field of paint removal technology and thus able to design and develop individual systems exactly tailored to your specific paint stripping tasks. Wherever our standard systems do not match your needs, we can develop creative solutions for the most-varied of requirements. In doing so, we attach special importance to plant safety and high quality.

Suitable for water-based paint strippers with operating temperatures of up to 90 °C. Modular design for the highest level of safety and (if needed) customization to the desired height of the spraying chamber. Electronics and paint stripping agent tank in separate "technical module." Uniform coating of the workpieces through the use of a nozzle system in the spraying chamber, consisting of needle-nose jet nozzles and flat-jet nozzles and a rotatable cage for the workpieces. High loading capacity by virtue of the cage diameter of 1500 mm and effective interior height of 2100 mm; max. cage load: 750 kg. Stripping agent tank: 1000 liters for long effective life of the medium, indirect electrical heating. All parts coming into contact with the media are made of stainless steel. Easy operation with clearly arranged displays and operating controls. High-quality Siemens control for monitoring the paint stripping process.

Scalable system, consisting of paint stripping, rinsing, conveyance of the workpieces, and (optional) vacuuming. Multitank systems can be manufactured on the basis of the TB400 or the TB1000. The basic unit is a system consisting of 1 paint stripping tank, 1 rinsing tank, drip station, semi-automatic conveyance system, and vacuum (optional). On this basis, we can design systems with various different paint stripping tanks (e.g., for different kinds of paint stripping agents), with one or several rinsing tanks, and (optionally) vacuuming for connection to the customer's waste gas disposal system.

Lifting aid with smooth hoist to lower / raise the racks (sieve basket, hooks, wire mesh crates, or similar) holding the workpieces into / out of the tank. This facilitates loading and unloading at a comfortable height, and without any direct contact with the chemicals.

The dip tank TB400 is the smallest model in our line of paint stripping systems. It is ideally suited for wheels / light-alloy rims, bicycle and motorcycle frames, painting aids or hooks. Insulated, double-walled dip tank ("vat-in-vat" system) with insulated top cover, indirect electrical heating, circulating system, and high-quality safety and monitoring technology.

Lifting aid with smooth hoist to lower / raise the racks (sieve basket, hooks, wire mesh crates, or similar) holding the workpieces into / out of the tank. This facilitates loading and unloading at a comfortable height, and without any direct contact with the chemicals.