Release - Import export

Quickrelease couplings for water pipes, oil lines, brake and clutch lines. The quickrelease couplings are always used when a very fast installation and removal of services is required. Areas of application are motorsport and aviation.

Single-acting round cylinder made entirely of stainless steel in a high-temperature-resistant design for door release for use in food processing.

Optigreen Opticote Slow Release Fertilisier is a fully coated slow release sediment fertiliser for extensive and intensive green roofs.

Universal tank caps and threaded flanges.

Pogo connectors are used for charging purposes or for signal transmission between detachable devices or within products.

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. With manual unlocking.

Bacstain- Bacterial Viability Detection Kit – CFDA/PI uses esterase activity of bacteria and bacterial membrane damage as an index. CFDA is hydrolyzed to carboxyfluorescein?which is fluorescent?by intracellular esterase. PI is a parallel intercalator into the DNA double helix that stains nucleic acids; it passes only through damaged bacterial membranes. Thus, this kit can be used to measure the ratio of bacteria with esterase activity to membrane-damaged bacteria on the analysis of the fluorescent images from each stain.

Perfect for keeping your body's natural defences vitalised and healthy! Vitamin C and zinc are important for a working immune system. In addition, vitamin C enhances iron absorption of the body and helps reduce tiredness and fatigue. The trace element zinc contributes to a normal acid-alkali, carbohydrate and fatty acid metabolic rate. As component of more than 200 enzyme systems, zinc is essential for a strong and healthy organism. Each Vitamin C + Zinc Slow Release Capsule contains 300mg vitamin C and 5mg zinc, which was developed into a special capsule. It releases its contents slowly and continuously throughout the day and thus supplies the body with the optimum amount of vitamin C and zinc.

Beside vitamin C, zinc is especially important for the support of the body's natural defences. Quantitatively seen, zinc is after iron the second-most frequent trace element in the human organism and component of more than 200 enzyme systems, which are indispensable for the body. Neither zinc nor vitamin C can be produced by the body itself, that is why a regular dietary supplement of these important nutrients is recommended. Each Vitamin C + Zinc Slow Release Capsule contains 300 mg of vitamin C and 5 mg of zinc in a special capsule development. It releases its contents slowly and continuously throughout the day.

Each tablet contains 300 mg of vitamin C in a special tablet development. It releases its contents gradually and provides thus the body with the optimal amount of vitamin C, which helps support the body's natural defence system. Just one tablet each day provides the body with a constant supply of Vitamin C throughout the day.

We can provide you with a series of special pressure relief systems to ensure the safe handling of pressure loads and stress such as encountered as a result of technical interference (e.g. accidental arcing) emanating from internal malfunction of the plant. Different versions and functionalities enable optimum adaptation to suit the respective technical building. Designs: Pressure relief vanes which close or open in the case of excessive pressure (to ensure IP 23-DH degree of protection with an upstream ventilation element) Pressure relief coupling Contiguous pressure relief valves, opening upwards or downwards Pressure relief flues Pressure relief domes Options: Special design for pressure relief vanes: Actuator for controlling air circulation (manual or motor-powered actuation via thermostat or hygrostat); Pressure relief function ensured in every operating position Our DRO and DÜA special roofs offer an ideal supplement or a separate relief option.

"No safety door without a suitable lock... This is the principle underlying our production of variable lock systems which meet the high requirements of pertinent norms. Special security functions ensure the correct locking of the station and prevent the operating personnel being unintentionally locked in. Designs: Rim dead lock Mortise station lock Mortise switchgear house lock Mortise compact station lock Swivel lever lock Latch lock Options: lock variants on right and left Lock with KABA perforation (Switzerland) Panic bar One or two profile cylinders Bolt contacts for lock monitoring and magnet contact Stainless steel security escutcheon

Our ventilation systems ensure that an optimum air exchange is achieved within technical buildings (e.g. for cooling transformer and low voltage rooms) and prevent penetration by snow, rain and insects. Individual elements can be flexibly adapted to suit building conditions and are suitable for integration in both doors and walls. Designs: Standard surface: anodised aluminium E6 EV 1 silver Production in recommended sizes or to suit building conditions With a horizontal perforated sheet (for LLE) With integrated swirl chamber for use in conditions involving driving snow and high wind speeds (for LSU/LSO) Aerating coupling for continuous venting Ventilation domes Miniature ventilators Slide ventilators Options: Anodised, painted or powder-coated surface – choice of colours Slide plate for manual air flow control Ventilator units for forced ventilation and aeration All-round swirl frame Special version for Type LLE: break-in inhibiting WK3 conforming to DIN ENV 1627 Our DRO and...

In choosing a Betonbau aluminium door, you have selected a secure solution that will effectively protect your technical building against forced entry and reliably resist pressure loads and stress such as encountered as a result of technical interference (e.g. accidental arcing). High-strength, weather-resistant materials carefully machined in our own metal production facility ensure that the outlay for care and maintenance is kept to a minimum Designs: Standard surface: Anodised aluminium E6 EV 1 silver Single and double-leaf interior door hinge plates Smooth sheet metal filler Station lock with emergency exit function conforming to DIN VDE 0101 and 3-point locking Prepared for one or two profile cylinders Door arrester Earthing strip M 12 earthing connection Options: Galvanised steel design Reduced or removable threshold Sheet metal filler with barleycorn structure Anodised, painted or powder-coated surface Choice of colours Thermal and sound insulation Hydraulic door closer...

— plug-in coding: round, triangular, hexagon, octagon — Fool-proof coding — 1.4404 (316L) / 1.4571 (316Ti) stainless steel — Seals: low temperature -50°C to 200°C (red) FDA — working pressure 0,5 bis 10 bar — With shut-off function — Suitable for compressed air

Spacewax Sealer is a wax-based mold sealer and release agent in the field of thermoset processing. It can be used for castable or spreadable polyester-, epoxy- and DCPD- resins. The operating temperature range of Spacewax Sealer is between room-temperature and +200°C. Processed correctly, Spacewax Sealer will leave a high gloss surface.

Mold Sealer S-31 is a semi-permanent mold sealer in the field of thermoset processing. It can be used for all types of resin and all kinds of processing, but especially for molds with highly porous surfaces. The operating temperature range of Mold Sealer S-31 is between room-temperature and +475°C. Processed correctly, Mold Sealer S-31 will leave a high gloss surface.

fluid 040 is an NSF- M1 registred, silicone- and solvent-free, release agent. The M1 classification is the highest approval by NSF for release agents, similar to H1 for lubricants and anti-corrosives. fluid 040 can be used for all types of thermoplastic and thermoset casting resins, but especially for plastics which are sensitive to tension cracks. The maximum operating temperature of fluid 040 is 170°C.

FT- 300 is a silicone-free dry release agent based on PTFE. It can be used for all types of plastics an all kinds of processing (even sintering). The maximum operating temperature of FT- 300 is 230°C.

PC Extra is a silicone-free dry release agent. It can be used for all types of thermoplastic, but especially for PC and other plastics which are sensitive to tension cracks. A post treatment of moulded parts with fluid 020 is possible. It prevents adhesive bonding between parts made of polyamide. The maximum operating temperature of PC Extra is 250°C.

Treil Part 310 is a semi-permanent release agent in the field of thermoset processing, which allows multiple demoldings. It can be used for all types of resin and all kinds of processing, but especially for molds with highly porous surfaces. The operating temperature range of Treil Part 310 is between room-temperature and +475°C. Processed correctly, Treil Part 310 will leave a high gloss surface.

Spacewax 300 is a release agent in the field of thermoset processing. It can be used for castable or spreadable polyester-, epoxy- and DCPD- resins. The operating temperature range of Spacewax 300 is between room-temperature and +140°C. Processed correctly, Spacewax 300 will leave a high gloss surface.

Treil Part 778 B is a release agent in the field of concrete and polymer concrete processing. Treil Part 778 B is very durable and allows multiple demoldings, even if very abrasive reinforcement materials and molds with porous surfaces are used.

Aqua Release 1026 is a water-based release agent in the field of polymer concrete processing. Aqua Release 1026 is very durable and allows multiple demoldings, even if very abrasive reinforcement materials and molds with porous surfaces are used.

JC 640 is a release agent to pre-treat metal- and resin-molds in the field of polyurethane foam processing.

Aqua Release 470 is a water-based, semi-permanent release agent and mold sealer in the field of thermoset processing, but especially for molds with highly porous surfaces. It can be used for castable or spreadable polyester-, epoxy-, phenolic and DCPD- resins. The operating temperature range of Aqua Release 470 is between room-temperature and +150°C.

The high-quality, super-calendered glassine papers used by HERMA are ideally suited for labelling machines with optical or mechanical scanning. Their adhesive bond properties ensure excellent processing on all standard flat bed and rotary die cutting machines.

Typical applications for kraft papers that are coated on one side include computer labels, e.g. for continuous and sheet laser printers which require higher stiffness and better flatness. HERMA kraft papers have adhesive bond properties that ensure excellent processing on all standard flat bed and rotary die cutting machines.