Results for
Germany
Highly wear-resistant reducers of type HVA NIRO® stainless steel are also available in all sizes and diameters. They have the following specifications: widened and welded material no. AISI 304 / 304L other lengths are possible at request
Request for a quoteGermany
They have the following specifications: widened and welded material no. AISI 304 / 304L other lengths are possible at request
Request for a quoteGermany
Reduction made of polyamide for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -40 °C / + 100 °C — Protection grade dependent on the combination with other components
Request for a quoteGermany
Reduction made of nickel-plated brass for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -60 °C / + 200 °C — Protection grade dependent on the combination with other components
Request for a quoteGermany
Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.
Request for a quoteGermany
As a standard, silicone hoses are made with polyester fabric. Reinforced fabrics such as aramid (NOMEX), Kevlar or fiberglass are also available as options. There are special Viton inserts for petrol and oil. All hoses are available by the meter, elbows and reducers. Custommade molded hoses can also be produced according to customer requirements.
Request for a quoteGermany
If you want to build a twoflow exhaust system, you need a Y pipe. There are Y pipes with three equal pipe diameters or as Y reducers.
Request for a quoteGermany
Stainless steel is expensive. Verinox offers the same level of quality as the conventional material used for the construction of tanks and containers while using less stainless steel. With Verinox – the duplex material developed by Lipp – a sheet of stainless steel is joined to a sheet of galvanised steel by means of a separation layer. Three components form the basis for this material that is ideal for tank and container construction not only does it have outstanding physical properties but it also uses a reduced quantity of expensive stainless steel, resulting in lower costs. With this invention, Lipp has successfully retained the economic benefit of the LIPP Double Seam System while improving the material savings made. VERINOX ENABLES STAINLESS STEEL TO BE USED INSIDE TANKS – ESPECIALLY WITH MEDIA THAT REQUIRE SUFFICIENT RESISTANCE No open joints due to the folded design Doubly lined in stainless steel with a smooth continuous finish
Request for a quoteGermany
Product group: Reagents CAS-Nr.: [86303-22-2] Shipping condition: ambient MW: 878.06g/mol Formula: C42H75N3O16
Request for a quoteGermany
Technical information The cross-section range is reduced from 0.05 up to 2.5 mm² (AWG 30 – 14) and a special front plate is added. This machine can be used for shorter infeed lenght of 15 mm + stripping length.
Request for a quoteGermany
Regardless of whether it involves reverse engineering, design of variants and customer applications or CAE services: We support our clients with routine engineering tasks. Download the infographic relating to the ANTARES LCS Engineering Services here (free).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
The GEMÜ N082, N182 and N782 pressure reducers ensure that a constant outlet pressure is maintained in process plant utilizing the pressure differential.If the pressure rises on the outlet side, the spring force is lower and the valve closes as the spring is raised. The pressure is reduced until the spring force and the outlet pressure are the same. If the pressure falls, the valve opens as the spring force presses against the diaphragm surface via the control aperture. The outlet pressure can be read off a diaphragm-protected pressure gauge (not available for N782) and the spring force adjusted using a set screw as required. - The working pressure can be very easily adjusted using a set screw and secured with the integrated lock nut. If required, the setting that has been made can be lead sealed - The flow-efficient design of the valve body ensures good flow rate values - Control errors are kept to a minimum due to the large control face and the spiral spring
Request for a quoteGermany
Application in electro enclosures. Features: - Continuous ventilation and drainage of the enclosure - Pressure equalization between enclosure and outer atmosphere - Reduces condensation - Polyamide PA6 V-0 - Temperature range -40°C / +100°C - Protection grade max. IP65 Vertical installation at the lowest point of the enclosure bottom so that condensation water can drain off via the breather.
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, thread: M12-63, PG7-PG48 - please have a look on our data sheet.
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, o-ring: NBR-Oz, protection class: IP768, range of temperature: -40 °C to +140 °C, thread: M12-M40, PG9-PG36
Request for a quoteGermany
- stainless steel 1.4301 - working pressure von 2 bis 10 bar - pressure range von 2 bis 8 bar - flow-optimised - fine adjustment of pressure - quiet operation - suitable for water and air applications - 1/8 inch thread
Request for a quoteGermany
Universal spray head where the spray quantity is set via a scaled measuring drum. This makes it possible to check the set quantities at any time. Any changes are immediately visible and can be corrected. With constant parameters (fluid, spray and fluid pressure), the quantity is always 100% reproducible. The supply line exits at an angle of 90° to the spray jet. Our LEO spray head is available in two variants: The LEOR spray head has an M5 thread for fastening to a customer-side mount. The LEOB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. Low pressure range from 0,5 - 2,5 bar Air consumption from 2 -5,5 /min Viscosity range from 2.300mm²/s (20°C) - 500 mm²/s (40°C) Spray with nearly round cone full of about 15 ° Available in the nozzle lengths 30, 70, 105, 130 und 155 mm
Request for a quoteGermany
Our PLFN features a standardized flange interface for ease of installation. The straight-teeth precision planetary gearbox has been designed for the highest performance and torque. Its high tilting moment delivers the best performance even under the highest radial and axial forces.
Request for a quoteGermany
Thanks to its standardized flange interface, our PSFN can be installed easily and reliably. Our Neugart-designed helical teeth makes additional noise absorption measures absolute. Thanks to its high tilting moment, you may demand the utmost from this precision planetary gearbox.
Request for a quoteGermany
Our PSN embodies pure progress: Its innovative helical teeth safeguard low-noise operations. This precision planetary gearbox minimizes vibrations, and therefore increases the quality of your workpiece surfaces even under the highest bearing loads.
Request for a quoteResults for
Reducers - Import exportNumber of results
37 ProductsCategory