Recycling - Import export

Sealing lids made of unmixed plastic combine excellent product protection with optimum recyclability. Advantages: Reliable water vapour and oxygen barrier with the lowest possible use of resources Additional barrier possible through metallisation without impairing recyclability Sealing against PET or PP Can be fed separately or together with the container to the respective recycling stream Good processability on heat sealing machines due to balanced combination of the individual substrates Application areas: Cosmetics industry food industry Pharmaceutical Industry

Sealing lids made of unmixed plastic combine excellent product protection with optimum recyclability. Advantages: Reliable water vapour and oxygen barrier with the lowest possible use of resources Additional barrier possible through metallisation without impairing recyclability Sealing against PET or PP Can be fed separately or together with the container to the respective recycling stream Good processability on heat sealing machines due to balanced combination of the individual substrates Application areas: Cosmetics industry food industry Pharmaceutical Industry

Mobile on floor or in the pit, mounted on a trolley. Grey reinforced fibre glass collector with automatic dirt water recycling incl. drip-off grid with slosh bafflet. Load capacity 80l

Optigrun Water Retentionbox WRB 170 on roofs used as retention areas, under extensive and intensive vegetation as well as traffic areas such as terraces, fire brigade access roads, car parks, etc.With closed, load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System With Capillary Bridges to transport stored rainwater from the drainage level into the substrate layer and to increase evaporation High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible)

Optigrun Meander Water Retention Board FKM 60 is used for multi-layered extensive green roofs.

Optigrun Protection and Drainage Board FKD 12UK under public areas on buildings used by vehicles. Suitable for inverted roofsOpen to diffusion Incl. PP thermally strenghended with 23 l/m² x s flow rate (GRC 4) On roof surfaces with a minimum of 2 % regular gradient of the sealing plane Prevents accumulation of water Without water reservoir function

With the servo X e-com you are ideally equipped to meet the demands of film packaging for the e-commerce, mail order and logistics sectors. Whether dealing with the direct dispatch of individual goods, packing groups of products or meeting the complex requirements of returned goods packaging for example, the servo X e-com packs goods with a minimum use of film and automatically adjusts the film bags with four sealed sides to the product's length as standard. To support the precise fitting of shipping bags, the servo X e-com fit model also adjusts the bag size to the product's width so that the machines fully automatically adjust to varying product sizes during the packaging process. Furthermore, packaging with upper and lower film enables a greater scope for branding, for example with two-tone shipping bags. Additional options include the ability to add an easy-opening perforation to the bags as well as inserting a double-sided adhesive tape for resealing a bag for returns.

Coating colour recycling at paper and cardboard industries During the production of coated paper, it has to be cleaned with water and so, waste water results with pigments of the coating color. Because of their properties, exisiting precipitation plants are working hard on these types of waste waters. Alternatively to precipitation plants, membrane filtration technologies can be used to recover these high-value coating pigments. For that, the water with coating color pigments is circulated through the membrane plant until the required concentration is reached. The permeate is free of particles the CSB value is reduced significantly. It can know be handled by the precipitation plant, which is relief by the removing of the pigments. The concentrate with coating color pigments will be recirculated into the production process. Advantages: Reduction of coating color and pigments consumption Reduction of solid amounts in the waste water, which means reduction of operation costs

The EcoSolv solvent recycling system ensures LEIBINGER inkjet printers consume the smallest possible amount of solvent. A JET3up or JET2neo series printer with EcoSolv consumes up to 50% less solvent. EcoSolv recovers the evaporated solvent from the printer exhaust air through condensation and directs it back into the supply tank. Solvent recovery allows you to save cash and protect the environment!

Mobile. Parts cleaning collector with sturdy drip-off grid, 80 kg load capacity, 30l. Water recycling via special sedimentation system with filter monitoring. 60 l water tank, 5 l cleaning agent reservoir, stepless adjustable pressure, metering device for cleaning agent, water shortage control, overheat fuse. Volume 1,8 l /m. 10 KW, 16A. 5 m hose with large pistol, hand screw coupling and lance SR-LA 600, 2 m hose with small pistol, quick change coupling and nozzle SR-ST. Hoses with quick change couplings at the device.

Ultrafiltration and microfiltration differ depending the pore size used. Ultrafiltration can filter out bacteria, viruses and other organisms. Both methods are also applied in the field of water recycling. They sperate undissolved and colloiddissolved solids.

PE film label manufactured entirely from recycled material Produced exclusively from recycled polyethylene, the HERMA label material rPE is thought to be the first of its kind intended for use in the manufacture of PE film labels. It responds well to coating during production and offers very good printability no matter what the technique, from flexo and offset to screen and digital printing. This solution therefore perfectly brings together sustainability and superior product characteristics. And with the completely new HERMA rPP self-adhesive material, we are following through in the booming recycled film segment.

Mobile, mounted on a trolley on floor or in the pit. Yellow reinforced fibre glass collector with filtering and automatic backfilling of re-usable coolant incl. drip-off grid. Load Capacity: 80l

Growing demand for recovered paper We are stepping up the use of recycled paper and rapidly expanding our range. One focus is on coated papers, which are of particular interest due to their wide range of applications and the increasing demand from label users. HERMAcoat Recycling (236), for example, consists of 100 percent post-consumer recycling material (PCR), i.e. the waste paper from private households.

"The rEvap technology is the perfect solution for small and medium-sized companies that want to close material cycles and minimize disposal costs. The plants are equipped with a plate module. We would be pleased to carry out appropriate preliminary tests for you. Technical details: For process water / waste water up to 1 m³/h Fully automatic Controlled via Siemens SPS Adaptable according to customer requirements All channel geometries possible Suitable for endurance run"