Pump stations - Import export

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to vertical Drum Pumps. Perfectly suited for the removal of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection on the bottom run of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of the medium when disconnected * Easy installation * Easy to dismantle * Low space requirement * Automatic emergency stop function of the engine in case of leakage detection * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The industrial version of the progressive cavity pump HD-E-SR transfers the advantages of the drum pump to highly viscous media. With its easily detachable design and small outer diameter (max. 41 mm), it enables the filling of viscous liquids up to 30,000 mPas. The pump is easy to dismantle and clean and can be combined with electric or compressed air motors to facilitate the emptying of liquids and conserve resources. * Also available in special immersion depths * Examples of media: Oils, glucoses, waste oils, disposal liquids, * Optionally driven by electric or compressed air motors * Uniform volume flow * Lightweight and versatile due to low motor weight * Continuous, low-pulsation delivery of up to 15 litres/min * Low wear and tear * Easily detachable outer tube

Suction and Pressure hose for liquid media, also with solids content. Resistant to faeces and light alkaline solutions. Suitable for use on suction vehicles and fixed-location pumping stations. Temperature resistant from -40°C to +100°C. Construction: Faeces-resistant tube Optional: Oil and petrol-resistant tube Tension and pressure-resistant fabric inlays Concealed steel spiral Abrasion-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

The Drum pump is suitable for thin-bodied, flammable and inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

The Pump Set is suitable for thin, flammable and inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

Eccentric screw pump tube B70V-D Industryfor three-phase motors The B70V-D 120.1 Eccentric screw pump in the industrial version is a powerful positive displacement pump for highly viscous, pasty and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus conserve important resources. * available in special immersion depths of 500 - 2500 mm on request * Connection to the discharge nozzle of the pumping station is made with a Tri-Clamp * Media examples: highly viscous mineral oils, resins, emulsions, paints and many other thick materials. Features & Advantages * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors

The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents. * Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc. * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

SERVOLIFT has developed a variety of special solutions due to the many customer-specific requirements. Whether it’s a fully automated, ceiling-guided feed system, a handling system for various bin shapes or an emptying system for pasty products (following plates with pump stations) - Servolift always has the right solution for customer-specific tasks. Custom development for your tasks

Uncontrolled electrostatic discharges when handling highly flammable or explosive media often cause personal injuries and damage to equipment. With smaller containers such as drums, buckets and canisters, the risk of electrostatic sparks is often underestimated. For these simple, but no less dangerous processes, Eltex has developed the TERRALIGHT battery-operated ground monitoring system. The TERRALIGHT grounding system shows the user that a correct dissipative ground connection is present and thus ensures a high level of safety when handling highly flammable media. Mobile ground monitoring, e.g. on mobile suction/pumping stations or containers, is also possible. For a safe ground contact, the contactor/clamp is important as an interface between the grounding device and the object to be grounded. For the TERRALIGHT we offer the TERRACLAMP with built-in grounding indicator. The user can see directly on the clamp if the grounding has been done correctly

Eisele rotary lobe pumps have been constructed since 1983 and have proved themselves in the agricultural and industrial sectors. Detailed key data here: Rotary lube pump (rotary piston pump) for pumping media up to approx. 30% TS Rotary lobe with metal core and perbunan coating Drive with PTO shaft or electric motor (7.5 / 11.0 / 15.0 / 18.5 / 22.0 kW) Pumping capacity from min. 450 l/min. to 6,000 l/min (depending on the media) Pressure performance 4 - 10 bar The rotary lobes can be changed quicker and easier by opening the four ring nuts of the cover, easy as one-man operation. Vacuum and pressure side can be freely selected by re-plugging the drive shaft Standard with front side-wear plates in the pump housing and cover Mobile pump stations with one or two rotary lube pumps (pumping capacity up to 7,400 l/min.) Eisele rotary lube pumps have proved themselves in the agricultural and industrial sectors. A continuous further development guarantees a high technical standard....

The UPP Pump Station is suitable for the realisation of complex, smooth and high quality precast concrete parts. As the centrepiece of the upcrete® technology, the UPP creates possibilities where other filling techniques are out of the question for reasons of quality or feasibility.