Results for
HS UMFORMTECHNIK GMBH
Germany
Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery]
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
NORPLAST® PVC-CU 384 AS is an antistatic suction and transport hose. It’s heavy, has a smooth interior and a grounding wire. Electrical and surface resistance is approx. 10⁹ Ohm
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
The Master-PUR HX Trivolution is a highly abrasion resistant and vacuum proof PU suction hose and transport hose with reinforcement underneath the spiral. It’s antistatic, microbe-resistant and hardly inflammable according to DIN 4102 B1. Surface resistance is < 10⁹ Ohm.
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
The Master-PUR H Trivolution is a PU suction hose & transport hose, which is very flexible. It’s antistatic; microbe-resistant and hardly inflammable according to DIN 4102 B1.Surface resistance is < 10⁹ Ohm:
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
Our stainless steel pipes offer the following characteristics: pipe ends deburred quantity delivered in accordance with customer’s specifications well and protective transport packed
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
In pneumatic conveying systems, conveying abrasive products – in particular at high conveying speeds – leads to abrasion and thus to wear in the pipe bends. In order to prevent this, the pipe bend of our highly wear-resistant DWR double-skin stainless pipe bends is encased in a second pipe bend, which creates a double-walled chamber. This acts, so to speak, as a “protective shield”: After the wear has taken place on the internal pipe bend, it fills with the product to be conveyed. When this process is completed, you are then conveying „product on product“ – and no further wear is possible! Version I: „Product-on-product” In this variant, the classic “double skin” comes into effect. not suitable for foodstuffs not suitable for material change Version II: „Lined with concrete” lined with extremely hard concrete colour: light grey not suitable for foodstuffs also available: lined with borosilicate glass
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
We can supply you with highly wear-resistant stainless steel pipe bends which have a service life 10 to 20 times longer than that of standard stainless steel pipe bends. This high degree of wear protection is required, for example for conveying fibreglass-reinforced plastic granules or similarly abrasive media. suitable for use of highly abrasive products easy installation no stepped pipe couplings and no flange connections required safe for use with food
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
We produce aluminium pipe bends with the following characteristics and product specifications: DIN EN 573-3, 755-1, /-2 /-9
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
Our speciality are thin-walled pipe-bends with large bending radius, especially for pneumatic conveying systems. The pipe-bends are cold-bent without any pleats on CNC-mandrel machines. Our quality management generally guarantees: welded seam smoothed or shaved (DIN 11 850 resp. DIN 17 457) absolutely wrinkle-free, no start-up bulges no scratching or scoring extremely low ovality visually aesthetic surface leg extension each side deburred sawing edges
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
The transparent hose can be used as a transfer hose for petrol and oil.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Self extinguishing PVS protective covering giving protection against corrosion and abrasion for all type of hoses.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Brake ventilation hoses with visible or concealed wire spiral. The inside is coated with neoprene or silicone, depending on the version. Due to the wire spiral, the hoses are very flexible and can be laid very well even with larger hose diameters.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
As a standard, silicone hoses are made with polyester fabric. Reinforced fabrics such as aramid (NOMEX), Kevlar or fiberglass are also available as options. There are special Viton inserts for petrol and oil. All hoses are available by the meter, elbows and reducers. Custommade molded hoses can also be produced according to customer requirements.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Oil hoses in inch and dash sizes. With or without stainless steel coating for normal and high temperature applications.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SCHWEIZER GMBH & CO. KG
Germany
Inch size petrol hoses for injection engines and carburetor engines. With or without galvanized steel casing
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Special Teflon hoses with stainless steel sheathing for high pressure applications such as brakes and clutches.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Special feed line for brake fluid. The supply line connects the brake fluid reservoir and the brake cylinder with one another.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Seamless tube elbows made of aluminum for welding.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Stainless steel pipes from HJS for individually adapted exhaust systems. Here you get angles, meter pieces to create an individual exhaust system or manifold.
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
The advantages to you: no more deformation of roundness when cutting bends on site easier extension-pipe/tiered pipe bend construction appealing visually pickled surface All of our pipes and pipe bends (both unannealed and annealed) are made of the following material: stainless steel pipe, material no. 1.4301 (AISI 304) longitudinal seam welded pipes hot rolled & cold rolled coils, unannealed, with or without pickling (W1) Make: IltaInox and/or Marcegaglia
Request for a quoteBÜRKLE GMBH
Germany
Retaining valve with embossed directional arrow or printed in black. With conical nozzles. Various uses.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
aluminum tubes with flange for connecting hoses together. Special sizes and lengths are possible on request.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
A large selection of universal dust caps and threaded plastic caps.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Elbows and connections made of steel and stainless steel for oil, gasoline and air hose lines. The connections are pressed onto the assembled hose.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Super lightweight reusable dash aluminum fittings. Manufactured according to aviation standards, suitable for petrol, oil, methanol, water and air. The first choice when it comes to reliable and flexible hose lines.
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
We will provide you with pipe couplings for different outer tube diameters e.g. to connect glass bends with stainless steel tubes. DVK-6 pipe couplings for suction conveying can be delivered in the following sizes: 47.0 to 40.0 mm 56.0 to 50.0 mm 66.0 to 60.3 mm
Request for a quoteResults for
Pipes and tubes - Import exportNumber of results
35 ProductsCompany type
Category