Results for
FRANKE GMBH
Germany
Franke FTC linear modules are light, compact and ready-to-install positioning units. The external guide system is moved by an internal spindle or toothed belt drive. Franke FTC linear modules are very versatile. The guide cassette can be designed to meet customer specific requirements.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
Hydrostatic bearings are characterized by practically frictionless movement. The corresponding linear guides are free from stick-slip effects and there is practically no wear on the guides. Gases (mostly air) or liquids (mostly oil) can be used as the carrying medium. Air-bearing guides are ideal, for example, for clean room applications or at high sliding speeds. If oil is used as the carrying medium, higher carrying forces can be achieved with the same size and better damping properties. Various designs are available, which can be customized at any time to meet special requirements in terms of installation space, load capacity, guide length / table diameter, drive type, position measuring system, etc.
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
Hydrostatic bearings are characterized by practically frictionless movement. The corresponding linear guides are free from stick-slip effects and there is practically no wear on the guides. Gases (mostly air) or liquids (mostly oil) can be used as the carrying medium. Air-bearing guides are ideal, for example, for clean room applications or at high sliding speeds. If oil is used as the carrying medium, higher carrying forces can be achieved with the same size and better damping properties. Various designs are available, which can be customized at any time to meet special requirements in terms of installation space, load capacity, guide length / table diameter, drive type, position measuring system, etc.
Request for a quoteFRANKE GMBH
Germany
For optimal functioning of the wipers, the holes in the guide rails should be closed with plastic covers, which are included with every delivery. As a replacement, you can also order them individually.
Request for a quoteFRANKE GMBH
Germany
The stop screws are screwed into the thread (option) of the guide rails. An attached rubber cap dampens the stop. For rail lengths with initial hole dimensions below L11 min. we deliver the drilling pattern offset by half a drilling jump.
Request for a quoteFRANKE GMBH
Germany
In addition to the felt wipers, the metal wipers are inserted into the wiper plate and clipped on. They are used to remove coarse dirt such as metal shavings, welding spatter or wood dust from the track of the rail.
Request for a quoteFRANKE GMBH
Germany
In the case of cassettes for screwing from below, the existing mounting holes are reworked so that screwing from below is possible. Please note any deviating positions of the holes and screw connection sizes.
Request for a quoteFRANKE GMBH
Germany
Cassette with star grip - standard Cassette with star grip or clamping lever for locking at any position on the guide track. The clamping acts without force on the guide system. It is used for manually movable devices, clamping and holding stops, delivery of tools and processing parts. Please consult us for further information. Cassette with clamp lever Cassettes with clamping levers allow the cassettes to be locked in any position along the guideway. The clamping acts without force on the guide system. It is used for manually movable devices, clamping and holding stops, delivery of tools and processing parts. We would be happy to advise you on application and design.
Request for a quoteFRANKE GMBH
Germany
Franke linear modules type FTD are light, compact and ready-to-install positioning units. They are extremely compact and combine the guide system and toothed belt drive within the housing. Franke FTD linear modules can be used universally. They are suitable for long stroke lengths of up to 7 meters.
Request for a quoteFRANKE GMBH
Germany
Franke FTB linear tables impress with their compact and robust design. The integrated aluminum roller guide is maintenance-free and protected from dirt by a metal cover. It is driven by a spindle. Franke FTB linear tables are suitable for precise processes in many measuring, testing and positioning applications. They are available in stroke lengths from 100 to 1500mm.
Request for a quoteFRANKE GMBH
Germany
Franke FDI linear guides are equipped with vacuum-compatible needle bearings and are made almost entirely of lightweight aluminum. Special design, material and lubricants prevent outgassing in a vacuum. Rail elements can be manufactured in lengths from 200 mm to 4000 mm.
Request for a quoteFRANKE GMBH
Germany
Franke FDH linear guides are suitable for linear movement tasks, especially in dynamic pick-&-place applications. They have rollers with angular contact ball bearings for the highest acceleration and speed values, for example when using linear motors as the drive source. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDG linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications in harsh environments and with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FRANKE GMBH
Germany
Franke FDD linear guides are suitable for linear motion tasks in almost all industries. Non-magnetic tracks without influencing the prevailing magnetic fields make them ideal components e.g. in medical technology or in electronics manufacturing. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly
Request for a quoteFRANKE GMBH
Germany
Franke FDC linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. Inlaid raceways made of corrosion-resistant steel make them insensitive to environmental influences as well as moisture or cleaning agents. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDB linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications with reduced demands on load and noise. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDA linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. The sealed roller bearings enable maintenance-free operation over the entire service life. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDI linear guides are equipped with vacuum-compatible needle bearings and are made almost entirely of lightweight aluminum. Special design, material and lubricants prevent outgassing in a vacuum. Rail elements can be manufactured in lengths from 200 mm to 4000 mm
Request for a quoteFRANKE GMBH
Germany
Franke FDH linear guides are suitable for linear movement tasks, especially in dynamic pick-&-place applications. They have rollers with angular contact ball bearings for the highest acceleration and speed values, for example when using linear motors as the drive source. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDG linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications in harsh environments and with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDE linear guides are equipped with lubricant-free, high-quality needle bearings and are made almost entirely of lightweight aluminum. They are suitable for linear motion tasks in almost all industries, especially for use in food production or in clean rooms. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDD linear guides are suitable for linear motion tasks in almost all industries. Non-magnetic tracks without influencing the prevailing magnetic fields make them ideal components e.g. in medical technology or in electronics manufacturing. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDC linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. Inlaid raceways made of corrosion-resistant steel make them insensitive to environmental influences as well as moisture or cleaning agents. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDB linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDA linear guides are equipped with very quiet, smooth-running, high-quality needle bearings and are made almost entirely of lightweight aluminum. The sealed roller bearings enable maintenance-free operation over the entire service life. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly
Request for a quoteResults for
Needle roller - Import exportNumber of results
48 ProductsCompany type