Mixing - Import export

Optigrun Seed Mix MKR/MGR for extensive green roofs with sedum, herb and grass vegetation in conjunction with sedum shoot seeding. Approximately 19 herb types and, on request, 1 type of grass on the basis of RSM 6.1.

The TF3000 combines the Turbomat T3000 and the intensive cooling system IK3000 in a single closed system. This means one thing most of all Best output per chamber part for the shortest process times. The automated transport system not only reduces operating costs, but also increases production capacities in the system. Maximum output per chamber part Production justintime, controllable and reproducible processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

The Drum pump F 426 is ideal for mixing and/or pumping inhomogeneous media. You can keep media moving that tend to segregate, even during pumping. With the outlet closed, e.g. via a hand nozzle, the F 426 can be temporarily operated as pure mixing pump. By turning the adjusting lever, the pump can be easily adjusted to "mixing" or "pumping". The pump is easy to dismantle for rapid cleaning. The pump is available in stainless steel and polypropylene. The stainless steel version can also be used in hazardous areas. Benefits: - 3 operating modes in one pump: Conveying Conveying with simultaneous mixing Temporarily mixed operation - Switching operating modes is possible even while operating - Easy to dismantle for cleaning - Two control levers to easily open/close the mixing openings - Mixing openings allow backflow of medium for mixing back into the container - Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on the PP model.

Optigrun Seed Mix EKR/EGR for the nature roof system structue (also pitched roof). Must be used in conjunction with sedum shoot seeding (then 50 g/m²). EKR herb version: approx. 30 herb species EGR grass version: approx. 9 grass species For extensive green roofs (also pitched roof)

The semicontinuous TFi3000 for industrial use is not a compromise, but rather the combination of the benefits of two entirely different systems! It permits smoke, heat and cold treatments in a single production step. Automated work processes lower your operating costs while at the same time increasing production capacities. Efficient combination of Ti3000 & IKi3000 Production justintime, controllable and reproducible work processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

Eggplant, olive, tomato and peppers constitute this mix for giving typicity to your sauces, meat stuffings, cooked fish, terrines and other culinary preparations.

Introducing our unique, plant-based formula for mobile joints, firm connective tissue, and beautiful skin. This innovative combination of amino acids, phytodroitin with hyaluron, and acerola is vegan and free from preservatives, binders, and additives. Our amino acid complex, mimicking the body’s own collagen, is quickly absorbed, stimulating collagen production essential for joint protection and skin elasticity. Phytodroitin enhances skin hydration, supports connective tissue, and improves joint fluid viscosity, ensuring smooth movement. Sourced entirely from Europe and produced in Germany, our product is safe, allergen-free, and offers an attractive price-performance ratio. Experience high bioavailability and a slightly spicy taste without the risks associated with animal-derived products.

The highest standards in cultivation and processing and constant monitoring guarantee the consistently high quality of Amazonas Chlorella and Spirulina products. Our algae, cultivated exclusively in spring water, are pressed into tablets without auxiliary substances or additives. We have combined the positive properties of both microalgae in one tablet, because both algae have different positive properties. Chlorella convinces with its unique ability to bind and eliminate unwanted substances in the body and thus helps the organism to recover more quickly after physical activity. Spirulina, the healthy "nutrient bomb", is particularly rich in vegetable protein and B vitamins. The alga also supports the oxygen supply of the cells and muscle development.

Danish pastry mini mix, v. of 5

Our solution with UV-C light for indoor areas with healthy indoor air The air steriliser ZAPP! uses UV-C to remove aerosol particles from indoor air. In the pandemic or during the usual flu wave. Bye-bye viruses. Bye-bye bacteria. Bye Corona. ZAPP! IS... SAFE FILTERLESS OZONE-FREE WHISPER QUIET EFFECTIVE FUNDABLE THE PLACES ARE NOW USING ZAPP! Office Medical practices Hospitals Nursing homes Public institutions Kindergartens and schools Retail Pharmacies Laboratories Hotel and gastronomy In practice, ZAPP! is already being used in many areas. In our picture gallery you will find various reference projects with our UVC air purifier.

Package Quantity : 12 x 720ml Artikel Nr: 40260 Grams: 720

The SmartMeth™ control system is a fully automated nitrogen methanol mixing system for heat treating furnace atmosphere production. The SmartMeth™ utilizes the latest in precision differential pressure flow measurement and touch screen controller design. This first of its kind system with built-in flow rate calculation automatically sets the nitrogen and methanol flow rates based on a desired %CO furnace concentration. FEATURES & BENEFITS • Automatic flow set point calculation - calculates the required nitrogen and methanol flow rates to maintain a desired %CO at the required volume • Customizable recipe software • Optional integrated carbon and temperature control • Automatic atmosphere recovery provides additional synthetic gas flow on demand, when introducing a new load into the furnace • Integrated paperless chart recorder stores furnace temperature, %carbon, and synthetic gas flow furnace details • Completely assembled and tested to NFPA 86 safety guidelines

Gas Mixing Panels include the Waukee brand rotary vane compressors, air and gas Flo-Meters, and either a mechanical carburetor or RatioProver for precise ratio control. Panels are available with additive trim gas or air Flo-Meters. FEATURES: • Available with Lubed Vanes (includes a set of Phenolic Vanes and an Auto Lubricating System) or Non-Lubed Vanes (includes a set of Long Life Composite Vanes) • Available with outlet pressures ranging from 0.5-5.0psig. For higher pressures, consult UPC. • Two options available for ratio control: Standard Carburetor, RatioProver • Available with output capacities ranging from 200-12,000CFH • Available with Built-in Unloader for pressures between 0.5-2.5psig or with Bypass Relief Regulator for pressure lower than 0.5psig or higher than 2.5psig • Available with Standard turndown of 2:1 or 10:1 when used with a Compressor Pressure Controller • Includes Gas and Air Flo-Meters and Air Filter • Available with Trim Gas or Air Flo-Meters

The RCV Plus™ Gas Mixing System is a combination of flow meters specifically designed to monitor and control the ratio of two gases. It consists of an RCV Plus™ and a FLO-TRONIC Plus™. The RCV Plus™ utilizes a micro-processor that continuously compares a preset ratio to the real-time ratio of the two gas flows, as measured by the FLO-TRONIC Plus™, and the ratio control valve itself. Using a stepper motor, the RCV Plus™ continuously adjusts the flow metering needle-valve to precisely maintain the preset gas ratio. The real-time ratio is continuously displayed on the LCD screen of the RCV Plus™. Included in the RCV Plus™ is an optional input for the addition of a trim gas, which is frequently used for process control. Trim gas addition is additive to the ratio. When trim gas is used, the continuously displayed real-time ratio then includes the trim gas addition.

We supply mixing screws for all conical mixers and dryers (also suitable for machines from other manufacturers) made from regular stainless steel and special materials, such as Hastelloy or titanium, in a variety of states, e.g. raw, polished or electropolished. We supply these mixing screws as replacements or for re-equipping existing machines.

Intensive vertical mixing of the container ingredients in the micro and macro range. An additional downstream shear ring dispersion is not necessary. Due to optimal dispersion performance, high efficiency and easy handling of the mixing tools used, the Dispermix meets the high requirements of demanding production processes for the introduction of liquids or powders into liquid. Agglomerates are crushed and thus better wetting of the powder with the liquid. Different slot widths allow the adaptation to the corresponding application. The Dispermix head generates two differently directed liquid streams. A vertical partial flow is directed straight to the vessel bottom, where it is divided and circulates the entire vessel contents. A second partial stream is deflected horizontally in the Dispermix head and guided through the dispersion zone. Solid particles and/or droplets are reliably comminuted and homogeneously distributed.

Flexibility in chemical, food, cosmetic and pharmaceutical production. With only one machine, different products and product quantities can be produced with the most suitable tool. The tool shaft can be easily disconnected from the drive, e.g. for cleaning, while continuing to work with a second shaft. The tool shaft has a shaft bearing separate to the motor, which is driven via a plug connection. The possibility of adding a mobile lifting stand offers additional flexibility. Batch sizes from 5 to 1,000 l are covered by the X50, X100 and X200 series. The X100/X50 adapter enables an X100 to be used to produce batches ranging from 5 to 1,000 l. By simply exchanging the shafts, it is possible to conduct jet mixing, mixing dispersion, dispersion, powder aspiration and wetting. Maximum flexibility creates investment security - short set-up times and easy handling.

TDS Induction Mixers draw powder, liquids or gases below their level into liquids and at the same time homogenise the contents of the container. The vacuum required for induction is generated in the mixing head. The machine is installed in the container from above by means of a flange or traverse. Alternatively, the TDS Induction Mixer can work on a lifting frame. The powder is inducted from the container and introduced under the fluid level by mixing it immediately and wetting. The mixing head generates the required negative pressure. Dust loads are prevented during the addition of powder by direct induction from the bag. Effective micro and macro mixing of the complete container contents with simultaneous addition of powder. Immediate wetting under fluid level. Complete mass transfer and homogeneity across all container levels via the jetstream mixing principle. In addition, liquids and gases can be inducted.

NEXT GENERATION TECHNOLOGY The Batt-TDS™ inducts powders dust-free under vacuum into a stream of liquid, thereby creating conditions for optimal dispersion of diverse components in a continuous sequence. Independent control of key parameters, including flow and shear rates, offers a wide process window in a single piece of equipment. A ‘swiss-army knife’ of process tools for battery slurry Dispersion of diverse materials is tailored according to their specific physical properties and topologies with the capability to produce high-solids slurries at high viscosities. Scalable and cost-efficient The Batt-TDS achieves high product quality in a fraction of the time required by conventional processes. Easily scalable across various battery chemistries, the Batt-TDS solution is suitable for production at current industrial levels and ready for tomorrow’s gigafactories. The platform offers a low cost of ownership with the highest productivity per square meter of factory space.

SIFMS.60 indoor silo with mixing screw Ø = 1250 mm m³ h H1 H2 SIFMS.1250.001.XX.60.AL 1.6 1000 2500 3500 SIFMS.1250.002.XX.60.AL 2.8 2000 3500 4500 Ø = 1590 mm m³ h H1 H2 SIFMS.1590.003.XX.60.AL 3.3 1250 3050 4050 SIFMS.1590.004.XX.60.AL 4.6 1875 3675 4675 SIFMS.1590.005.XX.60.AL 5.8 2500 4885 6000 SIFMS.1590.007.XX.60.AL 7.1 3125 5510 6600 Ø = 1900 mm m³ h H1 H2 SIFMS.1900.005.XX.60.AL 5.5 1500 3550 4650 SIFMS.1900.007.XX.60.AL 7.5 2250 4300 5400 SIFMS.1900.010.XX.60.AL 10 3000 5050 6150 Ø = 2400 mm m³ h H1 H2 SIFMS.2400.008.XX.60.AL 8.4 1250 3680 5000 SIFMS.2400.014.XX.60.AL 14 2500 4930 6200 SIFMS.2400.019.XX.60.AL 19.5 3750 6180 7500 SLMS.60 silo with mixing screw Ø = 2400 mm m³ h H SLMS.024.2400.XX.60.AL 24 4800 7500 SLMS.030.2400.XX.60.AL 30 6050 8750 SLMS.035.2400.XX.60.AL 35 7300 10000 SLMS.041.2400.XX.60.AL 41 8550 11250 SLMS.047.2400.XX.60.AL 47 9800 12500 Ø = 3000 mm m³ h H SLMS.035.3000.XX.60.AL 35 4200 7500 SLMS.044.3000.XX.60.AL 44 5450...