Mixers - Import export

The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications.

The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications

Series MF 010 - MF 1200 The BOLZ-SUMMIX conical screw dryer is a vacuum contact dryer. Due to its contained closed system and indirect heating of the product it is particularly suited for drying hazardous and toxic products to a very low final moisture content. As a result of its unique, very gentle mixing character, even mechanically sensitive products are not destroyed. The product quality after the drying process is reproducible and as good as that of the initial product, whereas the driving forces required are very low. The achievable, high endvacuum ensures low drying temperatures which is a clear advantage when drying temperature-sensitive products. It also ensures good heat transfer rates and short drying times, while at the same time requiring only little energy. The short drying times and the high containment level of the fully closed system make the conical dryer the best choice in instances where environmental and/ or product requirements are strict and remarkably...

Series CCD (100 - 20,000 liters) The Cylindro Conical Dryer CCD with a central shaft agitator was developed to be used both as a dryer (e.g. for filter cake) and also an evaporator when products have to pass a critical phase change from fully liquid to final bulk solid. The robust mixing element is showing its effective performance also during liquid and high viscous pasty phase to finally achieve the desired solid phase. As a dryer it is designed with a vacuum-/pressure rated vessel, heating jacket and integrated dust filter. Like for the CCM (Cylindro Conical Mixer) also the CCD offers a big advantage with a compact and space saving design. Special properties for the customer’s benefit: Short drying times because all product of the batch is permanently in motion thanks to a heated helix agitator (optional) Uniform heat distribution during the process without cold spots Variable speed of the helix agitator for optimum product quality Useful working volume from 15% to 80% of the...

Series CCM (100 - 20,000 liters) The Cylindro Conical Mixer CCM with a central shaft agitator is a batch mixer for more standarized mixing applications with rather low TCO (Total Cost of Ownership). With its robust central-shaft agitator it is pricewise an alternative to the conical screw mixer and besides powder/bulk solids also suitable for pasty products. Due to its compact design the mixer is particularly suitable when space is limited, especially for a narrow room height. Special properties for the customer’s benefit: Short mixing times because all product of the batch is permanently in motion Speed of the helix mixing element can be adapted to the process needs Useful working volume from 15 – 70% of the gross volume Adjustable clearance between helix/blade and vessel wall or bottom outlet Wide range of applications for powders, liquids and pastes Very good discharging Shaft sealing and bearing are installed outside of the mixing chamber ATEX design and EHEDG compliant design

Series DF 050 - DF 600 Mixing, stirring, cooking and sterilising are basic operations in food production and processing. The BOLZ-SUMMIX cookers with their conical construction and rotating mixing screw, have proven particularly useful for processing natural products such as coffee beans, cocoa nibs, gluten or nuts such as chestnuts. Various processes can be realised such as a heat treatment process by direct steam injection and heated jacket with continuous mixing, injection/absorption of process liquid, cooking and sterilising as well as extraction of components. Special properties for the customer’s benefit: Short process time with gentle and effective product mixing and intensive heat transfer Injection of steam via a ring channel Vacuum and pressure rated equipment Total drain of solid and liquid in a short time Flexible hence suited for a wide range of products, process and heat treatment Quick adding of required process liquids

Series SF 010 – SF 3000 The BOLZ-SUMMIX conical screw mixer works according to the proven principle of a rotating mixing screw being guided along the wall of the conical vessel at constant close distance by means of an orbital arm. The product flow maintains an intense yet gentle mixing and product displacement. Suited for demanding bulk solids of the pharmaceutical, chemical and food industries, it ensures a unique and gentle mixing process. Special properties for the customer’s benefit: Small drive power without mechanical or thermal product demolition by wear/attrition High mixing result and effciency, perfect blending and good mixing time Unique suitability for a wide range of industrial products with various character like density, particle size and shape, proportions etc. without risk of segregation Maximum flexibility with just partial load from 10 to 100% Well suited for multi-product application and frequently changing product volume Central, unrestricted and...

COMBER Termomix® Series TM 1000 - TM 40000 The Termomix vacuum paddle dryer/reactor is intended for monoproduction applications or bulk production facilities as mixer, reactor, precipitator and dryer. Special properties for the customer’s benefit: Economic, robust multipurpose machine for heavy industrial applications The agitator is supported on both ends providing excellent mixing characteristics, with externally interchangeable stuffing boxes or mechanical seals Large heating area resulting in an outstanding heat transfer rate by heating the vessel walls, the vessel ends as well as the agitator shaft and arms

COMBER Pharmadry® - Series PH 50 - PH 4000 The Pharmadry vacuum paddle dryer with short drying times is well suited for the drying of freely flowing, sensitive pharmaceutical ingredients and fine chemicals. Designed to meet stringent cGMP and FDA guidelines. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions Agitator supported at the rear, with externally exchangeable mechanical seal Entirely welded agitator design, without any bolts, without pockets and with all edges rounded for good cleanability Minimal build depth, thus very good accessibility for inspection and cleaning purposes Excellent cleanability using CIP systems, simple validation Available with separating wall between process and mechanical areas Double mechanical seal, externally interchangeable, dry running contacting or non-contacting lift-off type seals as well as liquid lubricated seals

COMBER Condry® - Series TDC 25 - TDC 15000 The Condry conical bottom agitated vacuum dryer was developed to process a wide variety of products. The machines have proven to be particularly suited for the drying of heat sensitive products as well as products with fragile crystal structure and thus sensitive to shear forces. The conical bottom allows for full product discharge characteristics. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions Excellent product discharge performance with negligible product hold-up due to the conical vessel bottom, very close agitator to wall/bottom clearances and a unique agitator design The agitator permits uniform mixing of the entire product mass, without the formation of lumps or balls The surface area for heat transfer is maximized for optimum performance and cycle times Agitator supported by the top head, with the seal in contact with the vapors only Entirely...

COMBER Turbodry® - Series TD 0.8/1.1 - TD 40/60 The Turbodry agitated vacuum pan dryer has proven to be excellent for the drying of sensitive, pasty and other “diffcult” products that pass through a highly viscous stage during the drying process. The dryers have proven to be particularly suited for the drying of heat sensitive products as well as products with fragile crystal structure and thus sensitive to shear forces. Excellent product discharge and shortest cycle times. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions Shortest possible drying times, suitable for the drying of sensitive, pasty, sticky and other “diffcult” products such as those turning highly viscous during the drying process Simultaneous axial and radial agitator movements permit uniform mixing of the entire product mass, without the formation of lumps or balls Double mechanical seal, dry running contacting or...

BS-miniDRY® DKL015 Especially for the simulation of complex processes and production steps in research and development, BOLZ developed the BS-miniDRY. Thanks to its compact design and ready for “plug and use” it is simple to install and flexible to use. Identically designed like a bigger production scaled conical screw dryer, it is perfect for product trials and scale-up. A wide range of drying and mixing process steps can be simulated by making use of the flexible filling volume, already starting with a feed of only 150 ml. Special properties for the customer’s benefit: Mobile, compact and easy transport design Easy installation „plug and use“ Designed to fit into a ventilation booth Flexible filling volume 10 to 100% Ideal for „scale-up“ calculations CIP-cleaning included Possibility for various changes of the agitator tool (from orbital arm system to various central shaft agitators) Designed as a complex process system or also as a reduced economical version

BS-pilotDRY® Series ML001 - ML010 The pilotdryer BS-pilotDRY from BOLZ is well suited for a wide range of various pilot-scaled trials and tests within the product and process development, but also for ongoing quality monitoring of a production. Mainly used as a traditional conical screw dryer, in addition it can also be used as a central shaft dryer. The hybrid stirrer technology allows drying and mixing processes to be simulated and tested in only one appliance using different mixing tools. Therefore relevant comparisons are possible which facilitate the selection of the most suitable stirring mechanism or agitator tool for the product and thus for the future production equipment. Special properties for the customer’s benefit: Mobile and portable skid design Simple „plug and use“ installation Complete process unit with ancillaries Flexible filling volume 10 to 100% CIP-cleaning included All product contact surfaces heatable Suited for a wide range of processes Ideal for...

Description ML005 Year of construction 1992 Manufacturer BOLZ-SUMMIX Machine no. M-2600 Product contacted material 1.4571 / 316Ti Working volume / Total volume (l) 50 / 149 Total weight (kg) 900 Surface finish inside (µ) >1.0 Motors (kW) 1,1 Motors (EEx/ATEX) Ex II 2 GD c/k T4/125° Design operating Press. Vessel (bar) -1 / +1 Operating temperature Vessel (bar) Max. < 100 Design operating pressure Jacket (bar) 6 Accessories Control panel – Non Ex

COMBER Pressofiltro® / Turbodry® Series PF/TD 5 - PF/TD 100 This Pilot Plant can either be used as Agitated Nutsche Filter/Filter Dryer or a Vacuum Dryer. Designed for processes in pilot plants, it is fully equipped for tests and trials and can as well be used for small scale production. Special properties for the customer’s benefit: Calculation, manufacture and design are in accord with Pressure Equipment Directive 97/23/EG or/and ASME U-stamp as well as with cGMP and FDA guidelines Approved for using in ATEX danger zone, group II 2G 2D (zones 1/ 21) Suitable as vacuum dryer, filter dryer or agitated nutsche filter Shaft seal through gland nut Device built on skid Control system protected against explosion (EEx-d) Options Multilayer PLC-system

Application possibilities of the Eisele slurry mixer are only in the agricultural sector. Key data: Double-start worm forced circulation With PTO-drive 30/48 kW or with electric motor 11/15/18.5 kW Threaded spindle with crank Three-point mounting, can be tipped Stable design, highly wear resisting mechanical seal, shaft in an oil bath Agitation shaft length 3,50 – 6,00 m A higher circulation rate is forced by the double-start worm. A reversing gear can also be mounted for running to the right or left which also permits use without effort under hard conditions. The three-point mounting is used for the quick and simple conversion using the tractor hydraulics. The fastening block also allows stationary installation. The PTO-drive is also a component of the ZQU.

Application options for the Eisele PTO mixers can be found in industrial businesses and in the agricultural sector. More detailed key data here: Double-start worm forced circulation (sucking) With PTO-drive 30/48 kW or with electric motor 11/15/18.5 kW Threaded spindle with crank Three-point mounting, can be tipped Stable design, highly wear resisting mechanical seal, shaft in an oil bath Agitation shaft length 3,50 – 6,00 m Application possibilities of the Eisele PTO mixers are in industrial business and agricultural sectors. They are the perfect solution for the effortless mixing in slurry tanks or similar using a tractor or other towing vehicle.

Eisele submersible mixers have been manufactured since 1982. More detailed key data here: A complete range of products for the agricultural and industrial sectors 2.2 - 22 kW Also as Ex-protected devices For stationary installation or mobile Biogas version The fluidic optimised double blade wide-blade propeller guarantees a high agitating and mixing performance, also for thick liquids. The Eisele motors impermeable to water pressure also guarantee a high running performance.

The YSTRAL jet stream mixer fulfils all requirements for a complete and homogeneous mixing of the contents of a vessel. Effective micro- and macro-mixing of the entire contents of the vessel without the introduction of air. Complete mass transfer across all vessel levels due to vertical mixing. Up to 90% of the energy used is converted into vertical flow - no rotating vessel contents. Even heavy sediments are suspended by directed streams. Rotating parts are protected against unintentional intervention. With open tanks no tank fixing is necessary. A fast rotating rotor surrounded by a stator generates a downward directed guide jet which directs the liquid flow directly to the bottom of the container. At the bottom of the container, the stream splits and creates an upward flow on the outer wall. At the surface, the liquid flow is redirected towards the bottom of the tank.

TDS Induction Mixers draw powder, liquids or gases below their level into liquids and at the same time homogenise the contents of the container. The vacuum required for induction is generated in the mixing head. The machine is installed in the container from above by means of a flange or traverse. Alternatively, the TDS Induction Mixer can work on a lifting frame. The powder is inducted from the container and introduced under the fluid level by mixing it immediately and wetting. The mixing head generates the required negative pressure. Dust loads are prevented during the addition of powder by direct induction from the bag. Effective micro and macro mixing of the complete container contents with simultaneous addition of powder. Immediate wetting under fluid level. Complete mass transfer and homogeneity across all container levels via the jetstream mixing principle. In addition, liquids and gases can be inducted.