Miniatures - Import export

Due to their extremely compact design, these load cells can be used wherever static or dynamic load forces have to be measured in very tight spaces. Model 8416 is perfect for use in micro-technology and just as suitable for measuring tasks in the research and development sector. The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. The sensor element inside the body carries a strain gage full bridge which outputs voltage directly proportional to the measurement variable upon application of force. The short nominal measurement distance of the ultra-miniature compression load cells due to their design provides a high degree of rigidity. If needed, the nominal characteristic value can be standardized in the sensor connection cable.

Due to their small dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. This compression load cell is easy to handle and its installation is uncomplicated. Its small size makes it perfect for use in very restricted structures for both static and dynamic compression force measurements. The miniature compression load cell model 8415 is a flat cylindrical disc, the bottom of which is closed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. A strain gage full bridge is applied in the gauging member of the measuring element. This produces bridge output voltage directly proportional to the measured force. The small diameter of the sensors results in high rigidity and a short measurement range. The measuring force has to be applied centrically and free from lateral forces.

Directly controlled brass solenoid valves in a very compact design for air, gases, steam and non-aggressive liquid media. In sizes 1/8" and ¼" as 2/2 and 3/2 Valve available in NC or NO with a choice of nominal widths from 1.5 to 4.5 mm in all common voltages and various sealing materials.

Forget everything you know about miniature gears. Dimensions, weight, precision – the new Power Gear Miniature sets new standards. PowerGear Miniature has a sensationally small installation size, an extremely light-weight aluminium housing, maximum performance and precision as well as many other advantages. The unique design of PowerGear Miniature will open up a vast range of applications in drive technology. miniature gear for maximum precision low backlash and high transmission accuracy case-hardened bevel gear tooth system friction-locked shaft-and-bevel-gear fit energy-efficient through high level of efficiency of 98% extremely light-weight aluminium housing maintenance free through synthetic oil

• According to DIN EN 61810-1, DIN EN 60664-1 • Clearance and creepage distances: contact - coil ≥ 5.5 mm • High dielectric strength ≥ 4 kV • High thermal continuous current Ith= 5 A • High switching power AC 250 V / 5 A • Compact size V = 2.47 cm3 • Very small volume DIL model, can be plugged into standard IC-socket • Wash proof RT III

• According to DIN EN 61810-1, IEC 61810-3 resp. DIN EN 50205 • Safe separation according to IEC/EN 60335; IEC/EN 60730 • Clearance and creepage distances: contact - coil ≥ 8 mm • Low rated power consumption • High mechanical service life • High continiuous thermal current • Large voltage range • Low mutual capacitance • High switching power • Very small volume DIL model, can be plugged into standard IC-socket • Different connection arrangements and contact materials • Wash proof RT III

• According to DIN EN 61810-1, DIN EN 60664-1 • Power miniature relay for SMD mounting • High switching power AC 250 V / 5 A • High dielectric strength 4 kV • High limiting continuous current Ith = 5 A • Compact size V = 2,47 cm3 • Safe separation L + K ≥ 5,5 mm EN 50178

• According to DIN EN 61810-1, DIN EN 60664-1 • Clearance and creepage distances: contact - coil ≥ 8 mm • Low rated power consumption • High dielectric strength ≥ 4 kV • High mechanical service life • High switching power • High thermal continuous current • Large voltage range • Very small volume DIL model, can be plugged into standard IC-Sockets • Different connection arrangements and contact materials • Wash proof RT III

• According to DIN EN 61810-1, DIN EN 60664-1 • Safe separation according to IEC/EN 60730; IEC/EN 60335 • Poled • Clearance and creepage distances: contact - coil ≥ 8 mm • Low rated power consumption • High voltage resistance ≥ 4 kV • High mechanical service life • High continiuous thermal current • For pulse operation, continuous operation permitted • Large voltage range • Very low mutual capacitance • High switching power • Very small volume DIL model, can be plugged into standard IC-socket • Different connection arrangements and contact materials • Wash proof RT III

• According to DIN EN 61810-1, DIN EN 60664-1 • Clearance and creepage distances: contact - coil ≥ 5,5 mm • Low rated power consumption • High dielectric strength ≥ 4 kV • High mechanical service life • High switching power • High thermal continuous current • Large voltage range • Very small volume DIL model, can be plugged into standard IC-Sockets • Different connection arrangements and contact materials • Wash proof RT III

These models are among our most precise and yet mechanically robust miniature load cells. High accuracy, finely graded measuring ranges, small dimensions and the simple introduction of force via opposing threaded pins open up a wide scope of laboratory and production applications. Their sophisticated engineering with integrated support membranes and overload protection reduces additional design expense in many applications, e.g. for external overload protection or guiding the parts introducing force to the cell. The result is that less space is required, less material is used and less weight is involved. Last but not least, there is hardly any friction on components that could falsify the measurement result. The force to be measured is introduced centrally and axially to the cylindrical sensor body in the tension or compression direction by means of the two threaded pins. This requires the sensor to be mounted without any elements touching the end faces of the sensor housing.

This, related to its measuring range, miniaturized load cell enables an universal and reliable operation in industries and laboratories. It is well suited for compression measurements in very restricted structures. The load cell is a compact construction and made of superrefined steel. Therefore it can be used in many fields of industry, like. Examples are: — Press-in force measurements on longitudinal and transversal connections — Compression force measurements on punch and roller applicancy — Spring tension measurements on shock absorbers for cars — Contact pressure determination in push rods — Compression force measurements on compressed-air knee-lever presses Thanks to the rounded top, in shape of a little hat, the force to be measured is led into the sensor centrically and free of lateral force. Specific characteristics: Very small dimensions Drug chain qualified cable Made of stainless steel burster TEDS optionally available

This transducer can be used anywhere thanks to its small size. Designed to work without a measuring chamber (uses a flush front diaphragm instead), this transducer is ideal for any measurements where the material to be measured may leave problematic residues. The range of suitable applications is even greater thanks to a choice of screw-on or weld-on adapters. Areas of use: Bottling plants, food industry Mixing facilities for the chemicals industry Pharmaceuticals Cosmetics industry Bioengineering These miniature pressure transducers are made entirely of titanium and therefore have outstanding resistance to corrosion. These convert the pressure-induced deflection of the diaphragm into a change in electrical resistance, which can be amplified, measured and processed by external electronic circuitry.

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

Load cell model 8417 measures the tension or compression force between both axially mounted metric exterior threads on the cylindrical sensor housing. Forces are only applied to the threadings, which are especially long, to accommodate counter nuts and must not be affected by external influences such as bending, lateral force or torsion. Any contact with units affixed to the sensor housing - even on the front - must be avoided. The measurement element is a membrane perpendicular to the axis of the sensor with a strain gage full bridge applied to the inner surface, which requires stable excitation with a rated value of approx. 1 mV/V. The connection cable is led radially out of the housing through a sleeve which is used for strain relief. FEATURES: —Measuring ranges from 0 ... 10 N to 0 ... 5 kN —Very small dimensions —Made of stainless steel —Rugged construction —Simple screw mounting —burster TEDS optionally available

The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available

B+B Thermo-Technik thermocouple connectors are universally compatible and ideal for when you are measuring and controlling temperatures for all your portable and stationary applications.

B+B Thermo-Technik thermocouple connectors are universally compatible and ideal for when you are measuring and controlling temperatures for all your portable and stationary applications.

B+B Thermo-Technik thermocouple connectors are universally compatible and ideal for any applications involving thermocouple technology.

The sensor element consists of a double bending beam with applied strain gages. Changes in the ohmic resistance of the strain gage fullbridge caused by applied forces are converted into electrical voltages. The precise value (characteristic value) of the output voltage, resulting from the application of a rated force to the sensor, is specified in the accompanying calibration protocol. The sensor has to be mounted by two screws on the cable side. The opposite side is meant to receive applied forces (loads). Once the rated stress or strain is exceeded by 20 %, further deflection of the bending beam is prevented by an integrated, mechanical stop. This protects the sensor element against permanent deformation.

B+B Thermo-Technik thermocouple connectors are universally compatible and ideal for when you are measuring and controlling temperatures for all your portable and stationary applications.

B+B Thermo-Technik thermocouple connectors are universally compatible and ideal for when you are measuring and controlling temperatures for all your portable and stationary applications.

The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget. This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. FEATURES Measuring ranges from 0 ... 200 N up to 0 ... 5000 N Small dimensions Inexpensive execution Stable anti-kink protection Made of high quality stainless steel Connecting cable suitable for drag chains burster TEDS optionally available

Miniature wire-actuated encoder designed to capture linear measurement distances. Its measuring length of 600 mm is very long considering its small size. SG5 is universally usable thanks to its standardized interfaces.  Very small design. Universally applicable thanks to standardized interfaces. Easy mounting. Measurement lengths up to max. 600 mm. Potentiometer, voltage or power output. Housing made of reinforced plastic.

Potentiometric displacement sensors are used for direct, precise measurement of mechanical displacements. The mechanical parts of the measuring equipment must be set-up in such a way that the sliding shaft can move without play or lateral forces. A special multi-finger slider ensures good contact even when the adjustment speed is high or in the presence of vibration. With its housing diameter of only 12.7 mm, the model 8709 is also suitable for highly compact structures. The movable fastening clamps allow the user variable options for attaching the sensor without complication. Optionally available adaptations, such as flange and ball joint versions, extend and complement the range of possible applications. Typical fields of application include: Measuring the stroke on riveting machines Measuring insertion distances Offset measurements on bearings Spring travel measurements on axes Measurements of the movement of hoisting platforms Length measurements on pipe bending machines

Compact design of sensor and connector. To be connected to MA503/2 or MA504/1. Works with magnetic tape MB500/1, MR500, MBR500. Reading distance ≤2 mm.

Magnetic Sensor. Compact design of sensor and connector. To be connected to MA502 or MA506. Works with magnetic tape MB500/1, MR500, MBR500. Reading distance ≤2 mm.

Miniature control knob. Shaft support: max. Ø 10 mm. Front display. Counter with 3 decades. Display can be designed for “mm” or “inch”. Housing color: orange or black.