Results for
LUTZ PUMPEN GMBH
Germany
Description: The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * also available in the Pure version (5254-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2
Request for a quoteLUTZ PUMPEN GMBH
Germany
Description: The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * also available in the Pure version (5254-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2
Request for a quoteBÜRKLE GMBH
Germany
The detectable SteriPlast® scraper, made of polystyrene, is produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. Sturdy and convenient scraper for disposable use. The detectable scraper is suitable for scraping off, smoothing or cleaning as well as removing residue. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic.
Request for a quoteBÜRKLE GMBH
Germany
Detectable SteriPlast® spoons, made of polystyrene, are produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. The detectable spoons are available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and are ideal for sampling powders, granulates and fluids. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic.
Request for a quoteBÜRKLE GMBH
Germany
Detectable SteriPlast® spatulas, made of blue polystyrene, are produced and assembled in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into containers such as paper or plastic sacks. Detectable spatula are ideal for sampling powders, granulates and pastes. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic.
Request for a quoteBÜRKLE GMBH
Germany
Detectable SteriPlast® scoops, made of blue polystyrene, are produced (except for the 1000 ml scoop) and assembled in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. Detectable scoops are ideal for powders, granulates and pastes. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic.
Request for a quoteLUTZ PUMPEN GMBH
Germany
Description: The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * also available in the Pure version (5244-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2
Request for a quoteFRIGORTEC GMBH
Germany
The POWDRYER™ PD08 metal powder dryer is used to dry inorganic metal powder for the complex additive manufacturing (3D printing) process. It corrects the manufacturer’s fluctuating metal powder qualities, thus optimizing the metal powder’s flowability. It also reduces the number of air inclusions in finished workpieces. Significantly higher material densities are the result. Fields of application > Particularly for metal printing products where maximum strength is required > For the printing of alloys of aluminium, titanium, tool steel, etc. > Special tools for the metal-processing industry, machine and system engineering, prototype development, and more > Aviation, aerospace, and automotive industries, plus medical and dental technology
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
SWR magnetic clamping brackets are switchable, precise devices that meet the highest quality requirements. Each leg can be switched separately and the holding force can be infinitely adjusted for positioning. The prismatic ground underside enables work to be carried out on flat and round material. SWR is available in the following versions: SWR 150, angular adjustment locking at 30,45,90,120,150,180° or free via locking screw. SWR 180, angle adjustment 45°-225°.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio. First choice for all users who want to move massive sheets and blocks.
Request for a quoteANDRITZ KAISER GMBH
Germany
from 630kN upt to 25.000 kN
Request for a quoteBEHA INNOVATION GMBH
Germany
Weldable round belts made of PU and TPE are available in various Shore hardness grades and diameters for transport and powertransmission. Many belts are foodapproved (FDA/EC/USDA) and have various special properties for particularly demanding applications (eg. antistatic, lowtemperature, UV resistance, low elongation, metal detectable). Typical industries are Food, logistics, printing & paper, packaging, building materials and much more.
Request for a quoteSIMPAC EUROPE GMBH
Germany
SIMPAC presses with servo direct drive stand for highly dynamic forming processes and offer maximum flexibility in the production. In combination with a high stiffness value of press body and drive, they deliver consistently high part quality. Overview: ● Press capacity: 8,000 - 30,000 kN ● Part size: medium to large ● Slide kinematics: servo (freely programmable) ● Applications: stamping, cutting, bending, embossing, drawing, integration of subsequent processes Features and benefits: ● Dynamic processes thanks to the use of torque motors that deliver high torque even at low speeds ● Maximum production flexibility through free programmability of slide movement, (forming) speed and stroke lenths ● Significantly more output compared to conventionally driven presses due to reversing pendulum movement of the slide ● Very solid, FEM-calculated and low stress annealed press body
Request for a quoteSIMPAC EUROPE GMBH
Germany
Hydraulic presses are suitable for the high-precision forming of various parts, whereby the maximum press capacity is available in every position of the slide. In combination with their flexibility in terms of slide speed and dwell time, they are also particularly suitable for press hardening applications. Overview: ● Press capacity: 1,500 - 25,000 kN ● Part size: small, medium, large ● Application: for the production of drawn parts or as part of a press hardening line Description and benefits: ● Slide movement either pressure and / or travel-dependent ● Specially designed hydraulic system without shift shock during operation ● Motorized oil circulation with cooling or heating unit The models for press hardening are available in 8,000, 12,000 or 16,000 kN and come with a newly developed combination of servomotor and hydraulics that allows higher speeds in the closing and return movement of the slide.
Request for a quoteSIMPAC EUROPE GMBH
Germany
The eccentric drive of the DTE series is primarily suited for cutting, blanking, forming and embossing operations. Its characteristic sinusoidal slide motion curve makes it ideal for flat and semi-flat parts. The proven and continuously optimized technology ensures reliable production processes. Overview: ● Type: Eccentric presses ● Press capacity: 8,000 - 25,000 kN ● Part size: large ● Slide kinematics: crank / eccentric motion ● Application: as a single press system either as progdie or transfer mode, as well as a press line Features and benefits: ● High part quality due to rigid, FEM-optimized press design ● The outside located pressure points and a long 8-fold slide guiding system absorbe off-center loads, spare press and die and ensure a constant part quality ● Extensive range of optional equipment, such as die cushions, pneumatic ejectors or moving bolsters for a faster die change
Request for a quoteSIMPAC EUROPE GMBH
Germany
Compact presses for a wide range of medium sized parts. Due to its drive-related slide kinematics, the MCL series is particularly suitable for drawn parts. Overview: ● Pressing capacity: 3,000 - 8,000 kN ● Component size: medium ● Slide kinematics: link ● Applications: stamping, drawing, forming Features and benefits: ● The compact design requires little floor space and no foundation at presses below 4,000 kN. ● The very solid, low-stress annealed press bodies are FEM-calculated and optimized by so-called “hot-spot analysis” in areas which are subject to higher loads. ● Motor, clutch/brake unit, lubrication system and control are of German origin and guarantee a long service life and maximum dynamics. ● The slide guiding system ensures a high level of tilting rigidity and reduces the cutting impact during the cut through when it comes to the processing of higher-strength materials.
Request for a quoteSIMPAC EUROPE GMBH
Germany
The PTS2 series is designed for prototype production, die set-up and modification work (including drawing, bending and punching tasks). The DSP series is especially suitable for die spotting. The mechanical micro inching system provides an accuracy of 0,05 mm. Overview: ● Press capacity: 300-20,000 kN ● Application: die testing tryout and production start-up
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SIMPAC EUROPE GMBH
Germany
C-frame presses are flexible solutions for manual work as well as for automated production processes. The CS is the all-rounder among the C-frame presses, while the ECS is ideal for punching and cutting operations with a higher degree of automation. Overview: ● Press capacity: 350-3,000 kN ● Part size: small ● Slide kincematics: crank ● Application: cutting, stamping, bending, embossing Description and benefits: ● Compact design, no foundation work required, good accessibility for maintenance ● Solid, low-stress annealed press body in monobloc design with minimal frame deflection ● Durable, wear-resistant and very quiet hydraulic clutch ● Casting slide with vibration dampening properties (ECS series) ● 4-fold slide guiding for a high tilting rigidity ● Hydraulic overload protection ● Production time as of 12 weeks
Request for a quoteSIMPAC EUROPE GMBH
Germany
The Scotch-Yoke drive of the DTL series has a modified link drive characteristic and reduces the slide speed during the forming phase. Thus the presses are not only suitable for cutting, punching and forming tasks, but also for drawing operations. The extra time that the material receives for plastic flow significantly increases the quality of the produced parts. The reduced impact speed of the slide extends the life of the press and the die. Overview: ● Press capacity: 6,000 - 30,000 kN ● Part size: large ● Slide kinematics: link ● Application: as a single press system either as progdie or transfer mode, as well as a press line Description and benefits: ● The outside located pressure points and a long 8-fold slide guiding system well compensate off-center loads, spare press and die and ensure a constant part quality. ● The automatic centralized lubrication system increases pro-ductivity and availability.
Request for a quoteSIMPAC EUROPE GMBH
Germany
Compact and modular presses for a wide range of medium sized parts. Flexible installation options as a single press in progressive or transfer mode or as fully automated press line. Overview: ● Pressing capacity: 3,000 - 10,000 kN ● Component size: medium ● Slide kinematics: crank ● Applications: stamping, cutting, forming, bending, embossing Features and benefits: ● The compact design requires little floor space and no foundation at presses below 4,000 kN. ● The very solid, low-stress annealed press bodies are FEM-calculated and optimized by so-called “hot-spot analysis” in areas which are subject to higher loads. ● Motor, clutch/brake unit, lubrication system and control are of German origin and guarantee a long service life and maximum dynamics. ● The slide guiding system ensures a high level of tilting rigidity and reduces the cutting impact during the cut through when it comes to the processing of higher-strength materials.
Request for a quoteJOST CHEMICALS GMBH
Germany
Power Jet dissolves pollutions like: oils, greases, resins, silicon, residues of anti-corrosion agents, colorbatches, etc. Power Jet dissolves nearly all kinds of label adhesives. It evaporates without residues.
Request for a quoteANDREAS MAIER GMBH & CO. KG (AMF)
Germany
Toggle clamps from AMF: versatile, strong, durable. Tried-and-tested technology with ever new variants. The benefits of our toggle clamps are highly valued in many fields of application: in the metal industry for drilling, welding, bending, grinding, checking and mounting as well as for the machining of wood and plastic in gluing, drilling, cutting and milling fixtures.
Request for a quoteGÜTERMANN GMBH
Germany
For seams requiring a high degree of heat resistance for protec tive clothing of firefighters, metal-processing industries, foundries as well as for battle dresses, canvas covers and equipments. / Special treads made of NOMEX® / Self-extinguishing after the contact to a flame / Good chemical resistance against weak acids and alkalis / Gütermann K is a long staple spun sewing thread / The benefits of the long staple spinning technique are uniformity and high breaking strength / The benefits of the long staple spinning technique are uniformity and high breaking strength.
Request for a quoteEPLUS3D TECH GMBH
Germany
The EP-M260 is an industrial grade metal 3D printer that uses advanced metal powder bed fusion (MPBF) technology. It is capable of easily and quickly converting CAD data into high-performance, complex structure metal parts. The 3D printer is an ideal choice for medium sized parts and small batch production.
Request for a quoteEPLUS3D TECH GMBH
Germany
With a building chamber size of 456*456*1080 mm³, Eplus3D Introduces EP-M450H to the successful line of MPBF 3D printers. The new EP-M450H is a marvelous metal printer that makes the production of reliable and high quality large metallic parts viable on industrial scale without requiring any tools.
Request for a quoteEPLUS3D TECH GMBH
Germany
EP-M300 is a marvelous metal printer that makes the production of reliable and high quality large metallic parts viable on industrial scale, with 500W/1000W single or dual laser optional, an ideal choice for big sized parts and batch production efficiently.
Request for a quoteResults for
Metal industrie - Import exportNumber of results
27 ProductsCompany type