Measuring systems - Import export

Cylinder series with dimensions based on ISO 15552 with an integrated position measuring system based on magnetostriction. The position sensor allows a high degree of accuracy in measuring the cylinder position. Analogue output signal 0-10 V via M 12 connector.

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters. The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets.

This B+B humidity and temperature measuring system, Hytelog Multisensor, is an efficient measuring and recording system which can be connected to up to 3 sensors for both temperature and humidity.

This B+B humidity and temperature measuring system, Hytelog Multisensor, is an efficient measuring and recording system which can be connected to up to 3 sensors - for both temperature and humidity.

This B+B humidity and temperature measuring system, Hytelog Multisensor, is an efficient measuring and recording system which can be connected to up to 3 sensors - for both temperature and humidity.

The B+B humidity and temperature measuring system Hytelog Multisensor is an efficient measuring and recording system which can be connected to up to 3 sensors for temperature and humidity.

The TLOG is an efficient measurement and indication system for a maximum of 20 temperature channels with USB interface.

The TLOG is an efficient measurement and indication system for a maximum of 20 temperature channels with USB interface.

The TLOG is an efficient measurement and indication system for a maximum of 20 temperature channels with USB interface.

The B+B humidity and temperature probe with USB interface is an efficient measuring and recording system for relative humidity and temperature.

Data loggers are suitable measuring instruments for continuous monitoring of the temperature. They record the temperature over a long period of time on any place you wish. The recorded data can later be evaluated on a PC.

Data loggers are suitable measuring instruments for continuous monitoring of the temperature. They record the temperature over a long period of time on any place you wish. The recorded data can later be evaluated on a PC.

Data loggers are suitable measuring instruments for constantly monitoring the temperature. The record the temperature over a longer period on any place you wish. The recorded data can later be evaluated on a PC.

For this innovative product the PC can become an efficient temperature measuring system. The USB-interface is integrated in the handle, as a result the probe has compact dimensions and the measuring probe can be operated directly on the PC.

A popular Data logger with dual inputs for recording digital signals on input 1 and analogue current or voltage signals on input 2.

LogBox RHT is a small portable electronic temperature and humidity logger with built in temperature and humidity sensors.

The TagTemp is a small portable electronic data logger for measuring and recording ambient temperature changes for applications - on the move.

Read head for magnetic tape scale SL710/720/730 Pl101-R/RH: 1Vpp interface PL101-RA/RHA: TTL line driver interface (RS422) PL101-RM/RHM/RP/RHP/RY/RHY: with serial interface from Mitsubishi (M), Panasonic (P) or Yaskawa (Y) Max. Response speed: 6.4m/s with 1Vpp Max. Resolution: 0.2µm with TTL (phase to phase) Easy installation Protection class: IP67 (RH version), IP50 (R version) Resistant to oil, dirt, vibration and shock

The DIGIFORCE® 9307 monitors processes in which precisely defined functional relationships between two or more measured quantities need to be demonstrated. These measured quantities are recorded synchronously during the manufacturing process or subsequent functional testing to produce a measurement curve, which is then assessed using graphical and mathematical evaluation techniques. After internal evaluation, the measurement curve and computed evaluation results are visualized on the color display and are also output at the external control interfaces. The processes in the controller are optimized by a powerful real-time operating system to achieve an extremely fast evaluation cycle: it typically takes just 15 ms to deliver the global OK or NOK evaluation result, which can then be analyzed by the higher-level controller.

Why temperature measurement? Information available regarding lifetime of the gearbox Lifetime extension of the gearbox and prevention of sudden gearbox failures Cost savings through prevention of unplanned machine stops Determination of oil temperature and oil condition Immediate reaction to thermic influences: timely maintenance measures (oil changes, change of the seals, replacement gearbox)

Incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring fixtures, assembly and production lines

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Extremely robust against oscillations and vibrations due to the Ø 32mm clamping shaft. The probe pin (without spring) is fixed with a magnetic tip on the surface of the measuring object. This allows the change in position of the target to be detected with high accuracy. Perfect for position detection of machine axes.

High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.

Specially designed for small and medium throughputs of up to 500 packages per hour, DWS static determines barcode, volume and weight in a single work step providing all relevant data for calculating freight and creating freight papers at the press of a button. With DWS static all shipping cost relevant data can be recorded at the touch of a button. The system comprises the tried and tested volume measuring system VMS 510/520, a robust static scale and a barcode scanner to read code information. All components are integrated in a sturdy mechanism. The system is ready for operation after a few minutes and is approved according to applicable standards. Also for full data recording in ERP systems verified systems are required.

Interferometric angle measuring system, non-contact, open design for resolutions of up to 1.5nrad. The BH20 angle measuring system in open non-contact design is based on interferometric signal scanning. It offers extremely high resolutions and repeatability. The interferometric scanning produces an extremely high signal quality with extremely low noise.

The SGH wire-actuated encoder measures the absolute, direct cylinder stroke in the hydraulic cylinder. Cost-intensive drilling of the piston is no longer required thanks to the new measurement system. As a result there are lower integration costs compared with other measurement systems and weakening of the piston is effectively avoided. The highlight: The measurement system can even be used in telescopic cylinders!In the framework of  SPS IPC Drives 2015, exhibition and online visitors nominated the SGH10 as the winner of the DirectIndustry i-NOVO Award in the TECH category. Measuring range 0 … 1000 mm. Absolute measuring system. CANopen interface, analog: Current and voltage. Operating voltage 9 ... 32 VDC. Pressure-resistant up to 300 bar, pressure peaks up to 500 bar. High degree of flexibility, adjustable to all measuring lengths thanks to teach-in . High electro-magnetic compatibility. High shock and vibration resistance.

incremental Profile MA48: low-cost electronic display LCD with high contrast, 12-digit, dot matrix For incremental measuring systems Freely programmable via front keyboard

Exposed linear encoder ( magnetic tape) for resolutions up to 5µm. Very easy installation by clamping or gluing with large mounting tolerances. Perfectly suited for simple length measurement in a wide range of applications. Measuring lengths: 200mm - 30m Accuracy: +/-(25+5L/1.000)µm; L= measuring length Graduation period: 5mm Recommended for resolutions up to 5µm Compatible with PL20C, PL25-3 and PL81/PL82 read heads (sold separately) SL110: open length measuring system in aluminum profile for clamp-on mounting SL130: open length measuring system as tape for sticking on Simple mounting Extremely robust position measuring system for large measuring ranges