Mats - Import export

Optigrun rot-proof Vegetation Mats are used for extensive pitched roofs or wind up-lift protection.

Optigreen degradable Vegetation Mats are used for extensive green roofs.

Heat protection and fire protection for pipes and hoses. Also available as mats or rolls for surfaces

The UV test chamber BS-04 is large, robust equipment for the time- or dose-controlled irradiation of samples with UV light. The chamber can be fully equipped for one of the spectral regions UV-C, UV-B, or UV-A to achieve the highest irradiance. Alternately, the use of two separately controlled lamp groups for different spectral regions allows for especially flexible operation of the chamber. The interior irradiation chamber has a base area of 86 x 65 cm² and a height of 32 cm. The sliding sample carrier facilitates loading and unloading. With a load of up to 20 kg, this can withstand all demands. The sample chamber operating temperature is about 25°C so that thermal damage to the specimen is avoided. Due to the high uniformity of the irradiation, the samples may be positioned in any order. The BS-04 can be equipped with two irradiation controls: the UV-MAT and the UV-MAT Touch.

The dose controller UV-MAT continuously measures irradiances, calculates doses, and stops irradiation at the set target dose. Two spectral ranges can be separately controlled. Thus, UV-MAT ensures a constant dose independent from lamp aging, temperature, and pollution. The measurements are made with calibrated radiometric sensors. The built-in diffusers ensure the cosine correction that is required for non-vertical irradiation. The sensor contains an extremely precise analog-digital converter and a temperature sensor. The integrated diffuser ensures the required cosine correction. Excellent long-term stability is achieved through the use of appropriate materials. The sensors are calibrated with traceability to PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are supplied with a factory calibration certificate.

With the AirWave ClimaFilm bubble wrap from FLÖTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral > 50% recycled material (largely from end-user disposal routes) 420mm wide Foil thickness 20 μm (thinner foils on request) For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

The proven AirWave air cushion mats from FLOTER are made in Germany and are ideal for the safe shipping of your packaged goods. Special print: Christmas tree Rear transparent 100% home compostable Foil thickness 20 μm For heavy to medium goods Very durable All-rounder for most applications Perforated for easy separation of individual sections Made in Germany

Type 8.4 Matte AirWave Bio - bubble wrap With the AirWave Bio bubble wrap from FLOTER you get a biodegradable foil that protects your packaged goods safely. Organic Home Compostable Foil thickness 20 μm For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Bio air cushion films are available in different cushion sizes: air cushion chains (type 7) and air cushion mats (type 8) . Compatible with the AirWave1, AirWave2 air cushion machine.

Type 8.1 Matte AirWave Bio - bubble wrap With the AirWave Bio bubble wrap from FLÖTER you get a biodegradable foil that protects your packaged goods safely. Organic Home Compostable Foil thickness 20 μm For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Bio air cushion films are available in different cushion sizes: air cushion chains (type 7) and air cushion mats (type 8) . Compatible with the AirWave1, AirWave2 air cushion machine.

With the AirWave ClimaFilm bubble wrap from FLOTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral 100 recycled material (82% from end-user disposal routes) 420mm wide Foil thickness 25μm For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

With the AirWave ClimaFilm bubble wrap from FLOTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral > 50% recycled material (largely from end-user disposal routes) 420mm wide Foil thickness 20 μm (thinner foils on request) For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

With the AirWave ClimaFilm bubble wrap from FLÖTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral > 50% recycled material (largely from end-user disposal routes) 420mm wide Foil thickness 20 μm (thinner foils on request) For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

Connects multiple lines simultaneously with a single operation for different fluids and sizes. Ideal for automated hydraulic or pneumatic cylinder operated systems that need to connect and disconnect several lines simultaneously. Automatic shutoff valves in both sockets and plugs ensure no outflow of fluid on disconnection. Body materials other than stainless steel are available, which can be ordered with or without valves (madetoorder products). Snap ring and screw threadin types to mount on the base plate are standardized. MAS type can accept axial eccentricity between socket and plug. The allowance of eccentricity is within the radius range of 0.3mm. Cupla connection with fluid under dynamic pressure cannot be made.

The high flexibility of msquare's silicone heating blankets is unique on the market. They fit perfectly into the component surface and due to the close contact, the blankets enable an excellent, very homogeneous heat transfer into the material. Whether using resistance or induction technology, the temperature distribution over the heating blanket surface has proven to be more homogeneous than with conventional heating elements. A special highlight of the msquare heating blanket is the integrated vacuum channel. It creates a perfect seal of the heating blanket to the outside. Air can be extracted through the channels and vacuum can be generated. A separate vacuum device is no longer required. This saves time and consumables. And yet the heating process takes place under vacuum conditions. High repair quality is guaranteed.