Valve control - Import export

The GEMÜ 549 2/2-way angle seat globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)

The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)

The GEMÜ 566 2/2-way globe control valve has a body with an integrated control mechanism which can be controlled by various operator types. In addition to a pneumatic version, manual and motorized versions are also available. The GEMÜ 566 valve was specially developed for the control of small quantities and enables flow rates from 63l/h to 2500 l/h. —Control of liquid media from 63 l/h to 2500 l/h —Linear or equal-percentage control characteristic options —Three operator types selectable (manual, pneumatic, motorised)

The GEMÜ 532 2/2-way globe valve has a rugged low maintenance aluminium piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. The actuator does not require an actuator flange (as used in the GEMÜ 512). — Robust aluminium actuator — High flow rates and compact design — Extensive range of accessories — Various flanged bodies made of stainless steel or SG iron

The GEMÜ 530 2/2-way globe valve has a rugged low maintenance stainless steel piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. — Suitable for inert, corrosive, liquid and gaseous media — Easily cleanable — Actuator and valve body are free from non-ferrous metals — High flow rates and compact design — ATEX version available as an option

The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. A stainless steel bellows and a handwheel extension are available as options (not for operator size 0). —Various valve body connections (threaded sockets, threaded spigots, butt weld spigots) available —High flow rates due to angle seat design —Optionally for contact with foodstuffs as per directive (EC) No. 1935/20041 (K-no. 1935)

The SAV Plus™ is a heavy-duty position control valve that maintains a valve's position based on a desired % output set point. It is designed to work in applications where the control of a process variable (PV) is accomplished using an independent sensor. Perfect for controlling Dew-point, Carbon Potential, etc. The SAV Plus™ incorporates a standard Waukee Flo-Meter scaled to the application requirements and an electronic control valve that modulates flow based on an external signal from a control system. The external signal can be 4-20mA or may be delivered using digital communications. FEATURES • Large LCD display provides vital information such as Valve position, Alarms, and diagnostic messages • Simple and intuitive programming menus • Field programmable engineering units • Standard Modbus TCP for easy integration with control systems • Manual actuation of valve possible • Built-in Web Server for remote access to device • Calibration in state-of-art ISO/IEC 17025:2005...

This series comprises valves with two connections that are operated by an electric motor. They are characterized by the fact that the valve stroke can be adjusted steplessly and held in place by a motor using a setpoint signal (420 mA or 010 V). This makes this series particularly suitable for precise dosing applications, as the servo motor reliably processes setpoint deviations of 1%.

Within the family of pressureregulating valves, a technical distinction is made between series of bypass valves, inline valves and threeway valves.

Brake force control valve for stepless regulation of the brake pressure.

Solenoid valves made of brass, membrane-controlled for air, gases, steam and non-aggressive liquid media. In the sizes 1/4" to 1", as 2/2 and 3/2 Valve available in NC or NO in all common voltages and various sealing materials.

Brass solenoid valves indirectly controlled for air, gases, steam and non-aggressive liquid media. In the sizes 1/4" to 1", as 2/2 and 3/2 Valve available in NC or NO in all common voltages and various sealing materials.

Directly controlled brass solenoid valves in a very compact design for air, gases, steam and non-aggressive liquid media. In sizes 1/8" and ¼" as 2/2 and 3/2 Valve available in NC or NO with a choice of nominal widths from 1.5 to 4.5 mm in all common voltages and various sealing materials.

The modular VD valve series allows the valves to be universally installed in a chain or on Omega DIN EN 50022 mounting rails. The solenoid valves guarantee fast switching times and are available in 3/2 NC or NO. Threaded connection G 1/8.

The small, universally applicable solenoid valve. Classic as a pilot valve or as a control valve with minimal dimensions.

Our 15 mm valve series type VB as flange valve for battery assembly. Valves controlled electrically and pneumatically, completely in aluminium. Technical properties like our VA series.

Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment

The GEMÜ 202 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. Good cleanability The solenoid can be replaced without removing the valve body from the piping Hermetic separation between medium and actuator Connection types: Solvent cement socket \ Threaded connection Connection standards: DIN \ ISO Body materials: PVC-U, grey \ PVDF Conformities: EAC \ UL

The GEMÜ 1435 ePos digital electro-pneumatic positioner detects the valve position via its external travel sensor. It has a solid housing with protected operating buttons and an easy to read LC display. The operating times can be set by integrated throttles. Connection and mounting to NAMUR is also possible. —Simple handling and commissioning —Simple electrical connection by detachable terminals —Automatically optimises the valve control during initialisation —No air consumption when idle

Reversing Valve UV Nom.width (mm) Flow rate (l/min) Control 10 ... 25 6.000 ... 6.960 24 V DC / 230 V directly controlled vacuum valve to control suction circuits when using blowers

Impulse Valve IMV Nom.width (mm) Flow rate (l/min) Control 10 ... 25 350 ... 1.350 24 V DC / 230 V directly-controlled, bistable vacuum valve to control individual suction circuits

Solenoid Valve EMV Nom.width (mm) Flow rate (l/min) Control 10 ... 25 430 ... 1.200 24 V DC / 230 V directly-controlled vacuum valve to control suction circuits

Solenoid Valve EMVK Nom.width (mm) Flow rate (l/min) Control 2 ... 4 200 ... 400 24 V DC directly-controlled pneumatic valve for control of suction circuits or ejectors

Solenoid Valve PEMV Nom.width (mm) Flow rate(l/min) Control 5 ... 19 150 ... 1410 24 V DC pneumatically controlled vacuum valve to control one suction circuit

The Valve-Tronic Plus™ is designed for use in highly demanding industrial applications that require accurate flow control and measurement. It can function as a stand-alone controller for basic applications or become an integral part of a process control system for automatic flow control. FEATURES • Large LCD displays actual flow rate, totalized flow, valve position, alarms, and diagnostic messages • Field programmable engineering units • Magnetic sensor technology immune to problems related with dirty oil • Configurable to control based on rate of flow or valve position for applications where the Process Variable (PV) is Dew-point, Carbon Potential, etc. • Standard Modbus TCP for easy integration with control systems • Manual actuation of value possible • Field calibration for null and span • Advanced polynomial calibration for high accuracy over the entire range of the meter • Built-in Web Server with remote access to device • Full PID setpoint control The VALVE-TRONIC Plus™...

- Whitworth pipe thread - Thread G2 for manual override - Chambered O-ring - Sealing: NBR - Material: brass nickel plated, Al black anodized - Allowable medium: air - Temperature range 14 to 158 °F (-10 to +70 °C) - Working pressure range 14,5 to 145 psi (1 to 10 bar) - Nominal flow rate measured when throttle is open at 87 psi (6 bar) and 14,5 psi (1 bar) pressure drop between inlet and exhaust

Coaxial highpressure valves are valves with two or three connections and two switching positions. The pneumatically operated valves of the VK series in particular have an extraordinarily positive relationship between high pressure range and high flow rate due to their high switching force.

The cartridge valves are available in a nominal width of 10 to 15 mm. Depending on the pressure difference, drives with one, two, or three pistons are required. The tedious dismantling of the entire valve body from the pipeline using a large wrench is no longer necessary; only the three screws have to be loosened. Another advantage is the consistently small valve diameter, even at the highest system pressures. The drives have small diameters and are arranged in tandem, one behind the other. This means that these valves can be installed next to each other to save space, even in extremely confined spaces. A version with a hose seal is available for heavily soiled or sticky media.

The 3/2way externally controlled valves are pneumatically or hydraulically operated valves with three connections and two switching positions. The control is carried out as standard via the attached 5/2way valve or via an existing valve terminal.