Testing - Import export

For checking the gas detection and gas measuring devices. All gases can be connected in 12 liter aluminum pressurized gas cans.

Test gas set for testing gas detection and gas measuring devices GPL and GPD. According to the DVGW rules, a weekly check with 1 vol% CH4 is necessary. With screw-on extraction adapter and display of the flow. Delivered with conditioning filter in a carrying case (not including GasPen).

You can find the gas concentration needed for each device in the user's manual. There are additional costs for shipping by air freight. We recommend using the test gas set or a sampling valve.

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-US has a vacuum manometer. In the PS 403-US model, the control buttons are replaced by toggle switches. With flow measurement. The test gas is conditioned (humidified)

Test station for revising gas detection devices. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. Rather than a pressure gauge, the PS 403-U has a vacuum manometer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station for checking the gas detection devices according to G465. The control of the minimum sensitivity (10ppm) and the control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 are possible. All gases can be connected to 1 liter aluminum compressed gas cans. The remaining pressure of the bottle is always displayed. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Test station to review the gas detection devices. The control of the display accuracy 1Vol% - 2.2 Vol.% -100 Vol% -5 Vol.% CO2 is possible. All gases can be connected to 1 liter aluminum compressed gas cans. If larger quantities of gas are required, a steel pressure gas bottle can also be connected via an adapter and the pre-pressure reducer. With flow measurement. The test gas is conditioned (humidified)

Producing test specimens for adhesive tape tests is another strength of ours. We manufacture the right test specimen for you from all common materials according to FINAT, AFERA or EN 1939. Plastic test specimens Injection molding test specimens, 150 x 50 mm, 200 x 50 mm With polished class-A finish With structured surface, brushed similar to the A.F.E.R.A standard 4001 Grained with various degrees of surface roughness Various plastics, 200 x 50 mm (for tests according to the FINAT standard)

We offer dental test specimens for the purposes of dental adhesive testing for dental or orthodontic applications. We fully prepare bovine incisors, for example. Our company is officially registered with the veterinary authority for the preparation of bovine teeth (DE08 2 25 0001 14). Our processes are subject to official hygiene regulations in order to ensure the safe delivery of high-quality dental test specimens.

We love a challenge so we are more than happy to take on special designs. We translate your specifications into top-quality products. In order to meet the most stringent requirements, we rely on our comprehensive machine park and on the production facilities run by highly specialized partner companies. These machines have been designed to manufacture both individual items and batches without any problems. Would you like to have more detailed information on our special designs? Why not contact us directly? We will be happy to assist you. Milling of profiles Special concrete designs Rings for placing Shore test specimens Milling of dumbbell test specimens for tensile tests Multiple test specimens according to DIN 53281ff Stainless steel rings for tests according to EN ISO 10563 Spacers for standard joints according to ISO 11600 Spacers for elongation test according to ISO 11600, made of aluminum or PMMA in various % values Feed mechanisms

Choose the right type of stone for you from our large stock of different stone materials. We assure you that the stones will be manufactured exactly according to your wishes and specifications. Our wide range of different natural and cast stones leaves no demand unmet. Why not contact us directly? We will be happy to assist you. Natural stones Marble in various qualities Granite Sandstone Slate Cast stones In decorative qualities In construction qualities, for example, made of Poroton, sand-lime brick or as roof tiles Clinker brick and others

YOU TAKE CARE OF THE COLOR, WE TAKE CARE OF THE QUALITY For paint tests, we are able to produce paint test panels that are made of various materials, offering a wide range of coatings, shapes and surface finish options. Of course we attach great importance to meeting your requirements. Upon request, we supply bright-finish, degreased or pre-treated panels. Moreover, test panels can be provided with drilled holes or rounded corners. You can also order test specimens made of any common materials such as wood, glass, aluminum, steel or plastic for the TABER abraser test. From various metals From various plastics With boreholes Bare or pretreated Degreased and vacuum-packed Various sizes upon request Coil-coated aluminum or sheet steel upon request

We offer a large number of materials used by the automotive industry. We will be pleased to supply you with raw and painted metals as well as automotive quality glass with or without ceramic coating. Do you wish to customize your test specimens by having a serial number applied to them? Then please contact us directly by phone or mail. All the plastic grades used in the automotive industry are available in the form of injection molded test specimens. Aluminum 6016 (with a thickness of 1.25 mm) Sheet steel grades DC06, DC04_HX420LAD+Z and DP600 Z140 on stock, further grades upon request Galvanized standard quality DX54D+Z100, DX54D+ Z140, DC04ZE50/50, DC04ZE75/75 (with a thickness of 0.8 mm); other grades upon request Higher-strength grades DP600+Z140 and HX420LAD+Z Die-cast aluminum, magnesium and zinc in various alloys Various steel or aluminum grades dimensioned for the impact test in accordance with ISO 11343 Laminated safety glass (LSG) and tempered safety glass (TSG)

We can offer a wide range of metal test specimens, starting from different grades of steel in various thicknesses and alloys right through to non-ferrous metals. Are you looking for galvanic finishing or machining solutions? Then you have come to the right place. Punching, deburring, and the rounding of corners are an important part of our portfolio. We will be happy to finish surfaces, for example by means of degreasing or sandblasting. Further finishing options are available upon request. We can also provide test panels with a customized serial number or marking if desired. Stainless steel 1.4301, 1.4571, 1.4401, 1.4310, other grades available upon request Test specimens According to A.F.E.R.A. 4001 (old standard), with defined finish With high-gloss finish (according to FINAT, PSTC standard, A.F.E.R.A. standard 5001, EN 1939) Titanium Grade 1 and grade 5, other grades available upon request Automotive grades painted

We produce blanks from plastic in line with your specifications. Upon your request, we also process pellets specified and also provided by you in our injection molding department. We keep a wide range of common plastic grades in stock, which we process into test specimens of various sizes according to your specifications. On request we also procure special materials and process these in line with your specific requirements. We process every available type of pellets to form DIN A5 format sheets or smaller sheets lap shear test specimens 100 x 25 x 3 mm dumbbell test specimens We deliver various surface finishes structured high-gloss automotive graining used by a wide range of car manufacturers We deliver every SMC quality depending on the availability of prepregs with class-A finish also in automotive quality Types of plastics ABS, PC, PE, PMMA, POM, PP, PS, PVC, PET, PTFE, PA6, PA6.6, PU, Polymer-based glass fiber-reinforced plastics

Our experts manufacture various wood specimens from common wood grades. During production, we attach great importance to using wood that is free of cracks and knots. We also pay attention to the annual ring position of the wood when selecting the material. Do you wish to order further processing by grinding or drilling? Then this is the right place.

In any way, shape or form – our diverse selection of tiles offers the right tile for every taste. You only have to choose the desired size and tile type. Our stock of test tiles also includes stoneware and porcelain stoneware for adhesive testing, for instance pursuant to EN 1324 or EN 12004. You are free to specify the dimensions of our fiber cement test specimens.

We can work with almost any concrete formulation you request. In addition to the formulations based on the DIN/EN standard, we produce customized formulations for you. Our own mold construction department helps us to be flexible in producing sizes and formats according to your specifications. Upon your request, concrete test specimens can be subjected to customized aftertreatment by grinding, saw-cutting or sandblasting.

Are you aware of our finishing options for metal and aluminum test specimens? Chemical degreasing, deburring, grinding, turning, milling, punching or blasting – no problem. Upon request, test specimens can be customized and labeled with serial numbers. Contact us to find out how we can help you. By the way: we can manufacture test specimens for the TABER-ABRASER from all kinds of metals.

At the limit of what is possible: Reliable contact probes for finest structures and semiconductor contacts down to 40μm pitch.

With such flexibility, the sales team at Lipp can enable any customer to specify exactly what is needed for their installation. From complete, turnkey systems to individual components and accessories – Lipp can support customers whatever their requirements. Consultation is a primary objective for Lipp before any work is undertaken. Lipp provides diagnostic tests, efficiency calculators and flow sheets to visualise a tank system and inform the customer of the performance they can expect. This is especially useful for anaerobic digestion – where Lipp experience supports the efficiency and safety of the system from design through to construction. Particular attention is always paid to the content to be stored within the storage system, which allows Lipp to offer customers the chemically stable materials and accessories to get the most from their storage tanks and digesters. Fundamentally, Lipp’s focus on the customer allows consultation and sales to be perfectly integrated

Both systems are also ideally suitable for feeding pigs and cattle. They enable the feed to be used in an energy saving and environmentally friendly way which is fully automated and not dependent on the weather. As far as the use of renewable raw materials in biogas plants is concerned, besides being suitable for automation this system offers the benefit of significantly reduced retention time in the digester, making it extremely efficient and economical. All containers benefit from the familiar advantages provided by the tried and tested LIPP Double Seam System and the LIPP material VERINOX. These two systems have been proving their agricultural worth in terms of liquid preservation for more than three decades.

Efficient on site production enables silos with a variable diameter to be installed quickly and cost effectively at the customer’s site. ACCESSORIES Modules prefabricated at the factory, e.g. filling and draining systems, can be installed and added. THOUSANDS OF PROJECTS REALISED WORLDWIDE The tried and tested LIPP system has been used to construct thousands of systems all over the world for more than 55 years. In particular, customers value the longevity of the tank solutions and the possibility of easily modifying them or fitting a wide variety of accessories during their service life. A selection of the projects carried out using LIPP bulk storage containers is shown below

The force measuring chain has been developed for applications where the requirements for precision are not the primary focus, but rather where an economical purchase price and simple functionality are the key criteria. The sensor‘s strain gauge technology allows both static and dynamically changing forces to be measured. The large display means that the force acting on the sensor can be read easily. The four integrated threaded holes allow the sensor to be integrated quickly and easily into existing production and assembly equipment. Typical applications include: —Testing the strength of welded joints —Sports medicine —Monitoring the clamping force of hose connections The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor.

A special probe design allows contacting with very high currents and very low contact resistances. Additional functions like temperature sensors or sense pins can be integrated, even at limited space.

Automatic inspection and test unit: Automatic choice of measuring ranges from 200 μΩ to 20 kΩ Resolution up to 1 nΩ Standard interfaces IEEE488, RS232, RS485, (USB and Ethernet option) Checking of tolerances, classifi cation with statistics Highest measuring accuracy: Measuring error ≤ 0.01 % Future-orientated measuring method with thermal e.m.f. compensation. High level of stability due to constant comparisons with internal reference values. Inductive probes: Current regulation results in voltage-free disconnection, calculation of cooling curves of coils. Menu control: Setting for measuring current entry for absolute or relative limits, classifi cation with statistics, bar display for calibration of measuring probes, determination of resistivity, and many other functions. The operation of the measuring section of the RESISTOMAT® model 2304, 2305 high-precision inspection and test unit is based on an upgraded 4-wire design.

Milling of complex components for automotive and mechanical engineering. Production of prototypes, test parts, small and large series according to data records, drawings, samples or specifications. Machining of cast and forged blanks. Attachment of decorative surfaces.

tube leak detection machine