Testers - Import export

The All-in-One module 2511 is predestined for use in automated manufacturing testing of high-performance battery modules and battery packs, regardless of whether they are round, prismatic or pouch cells. In single or multichannel mode, important battery parameters such as AC and DC internal resistance or cell voltage can be recorded and evaluated extremely fast and precisely using fieldbus-capable technology in order to make quality-relevant statements regarding ageing .............. FEATURES AC and DC internal resistance measurement 10 … 300 mΩ Four-wire measurement method for highest precision Measuring and evaluation results in a few milliseconds Frequency ranges: 1kHz, 100 Hz, 10 Hz, 1 Hz Voltage measurement: 0 ... ±5 VDC/±60 VDC Temperature measurement: 0 °C … +100 °C Resolution: up to 0.01 μΩ Single to multi-channel applications, temperature measurement Extremely compact design, state-of-the-art interfaces PC software for intuitive parametrisation and configuration

Automatic inspection and test unit: Automatic choice of measuring ranges from 200 μΩ to 20 kΩ Resolution up to 1 nΩ Standard interfaces IEEE488, RS232, RS485, (USB and Ethernet option) Checking of tolerances, classifi cation with statistics Highest measuring accuracy: Measuring error ≤ 0.01 % Future-orientated measuring method with thermal e.m.f. compensation. High level of stability due to constant comparisons with internal reference values. Inductive probes: Current regulation results in voltage-free disconnection, calculation of cooling curves of coils. Menu control: Setting for measuring current entry for absolute or relative limits, classifi cation with statistics, bar display for calibration of measuring probes, determination of resistivity, and many other functions. The operation of the measuring section of the RESISTOMAT® model 2304, 2305 high-precision inspection and test unit is based on an upgraded 4-wire design.

The Battery Cell Simulator serves to test Battery Measuring Modules in the 2511 series, which are used in battery module assembly applications (incoming goods inspection, BoL, EoL). The Battery Cell Simulator is able to emulate battery cells of different technologies with resistance and open circuit voltage simulation. The resistance simulation replicates the purely ohmic resistance of a cell. The Battery Cell Simulator runs on 24 V DC. The LED on the front indicates the different operating states. Resistance and voltage values can be defined from standard values or from a custom set of values.

Mobile test device for detection of the maximum torque (drag indicator mode) and for the detection of the power range (constant load) of motors in dental and dental surgical application area. arbitrary loading curves endurance test speed ​​measurement in aluminum case permanently installed Calibration disc and calibration will be in the trunk.

FXL-CT table-top units are built for a maximum of 2 channels without preselection. They can be used to control magnetic chucks up to a total area of approx. 1.2m2. can be controlled. FXL-CT is designed as a table-top unit or to be attached to the machine wall by means of the magnetic feet on the back. The operation is carried out directly on the device.

Probe Buddy™ is a smart testing device that checks the integrity and health of an oxygen probe from United Process Controls and from other manufacturers. It’s also used to imitate the output signals of a working probe to check the scaling and operation of the process control system. FEATURES & BENEFITS • Troubleshoot problems with your probe and control system • Assess the probe’s usability and performance • Verify controller’s input performance • Eliminate unneeded replacement of non-defective probes • Hand-held device operates as a probe test meter and a probe signal simulator • Enables non-expert to perform probe troubleshooting procedures like an expert • Accepts selectable TC and mV inputs from any oxygen probe • Outputs selectable TC and mV signals to simulate an oxygen probePerforms a probe impedance test when connected to a probe • Computes carbon, dewpoint or oxygen in input or output mode • Specific probe connection cables available, no hard wiring required

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes.In our product portfolio for measuring electrostatic charges and leakage resistances you will discover systems and products for many industrial sectors. Personnel grounding tester PGT120: Electronic test apparatus for checking personnel grounding systems such as electrostatic wrist straps and conductive footwear. The unit is equipped with two separate measuring circuits and is therefore capable of checking wrist straps and footwear separately or in parallel. The test result is signaled visually, audibly (only if error is detected) and via contacts. Dimensions: 138 x 19 x 53 mm (L x W x D).

Fully Automatic Integrity Tester 3 can be used to check the integrity of membrane filter cartridges used in the food and beverage industry Integrated languages: DE, EN, FR, ES, PT, IT Independent setting of the test pressure Automatic execution of the pressure hold test Self-venting after the test Built-in thermal strip printer Data backup / management on PC Memory full display Stainless steel pressure connections Pressure measuring range 0-4,000 mbar 1 to 19 freely programmable test programs 200 test protocols saved, first in / first out Data backup / management on PC Memory full display

Semi-Automatic Integrity Tester Integrity Tester 1 can be used to check the integrity of membrane filter cartridges used in the food and beverage industry Integrated languages: DE, EN, FR, ES, PT, IT Semi-automatic pressure hold test Pressure measuring range 0-4,000 mbar 1 to 19 freely programmable test programs 150 test protocols saved, first in / first out Data backup / management on PC Memory full display Stainless steel pressure connections Charging power supply: EU, US, UK, AU Option: print function of mobile printer

The Zwick analog shore hardness tester is a testing device with a pointer. Due to its pointer, this tester can be used to measure value that is shown after the test in hard-to-access locations. Also, it can work in tests such as soft rubber, elastometers and natural rubber to Shore A. For tough materials, these includes harder elastomers, plastics and rigid thermoplastics to Shore D. This tool can work with either material that has different hardness rating coming from shore A up to Shore D. Plus, this test device have load weight and control unit which can be easily accessible.

Unique accessibility The various hardness testers in the Rockwell product group are used for classical Rockwell methods (load 60 - 150 kg), superficial Rockwell methods (load 15 - 45 kg) and Rockwell/superficial Rockwell combinations (load 15 - 150 kg).

The HIT series offers pendulum impact testers for plastics. They are specifically designed for manufacturing and processing plastics. Designed with an accurate and reliable structure, these instruments are configured in the right range according to standards of use. They make use of carbon double rods for the pendulum and are capable of providing maximum stiffness in the impact direction. These pendulum impact testers deliver optimum concentration of masses at a specific point of impact. A single pendulum is integrated with a fast-change device therefor allowing faster, zero-tool pendulum changes. The HIT series are characterized by their easy to operate system and ergonomically built controls. Typical tests: - Charpy tests: ISO 179, ASTM D6110 - Izod tests: ISO 180, ASTM D256, ASTM D4812 - Impact tensile tests: ISO 8256 Methods A and B, ASTM D1822 - Dynstat bending and impact tests: DIN 53435

With a maximum impact speed of 4.4 m/s and a drop weight of 23,5 kg, this drop weight tester is ideally suited for puncture tests to ISO 6603-2. A standout feature is the excellent test area accessibility, enabling rapid completion of test series including direct feeding of temperature-conditioned test plates. This drop weight tester is unbeatable when it comes to efficiency and operator-friendliness. Range of application: The Amsler HIT230F is ideally equipped for multiaxial impact puncture tests on plastics. Its range of application includes material characterization of standard specimens in accordance with established standards in research and development and quality assurance. • Multiaxial impact puncture tests to ISO 6603-2, ASTM D 3763, at room temperature and in extended temperature range.

A new dimensionThe ZHN universal nanomechanical tester is used for comprehensive, mechanical characterization of thin layers or small surface areas with the necessary force and travel resolution. This includes measuring indentation hardness, indentation modulus, and Martens hardness to ISO 14577 (instrumented indentation testing). Key Advantages and Features - Modern software, with clearly structured design - Stiff frame design with indenter axis exactly in the movement axis (no tilting moment) - High degree of modularity ZHN Applications: - Hardness and Young´s modulus to DIN EN ISO 14577 - Vickers hardness - Micro ear tests - Scratch and micro-scratch tests

Combining the bestThe ZHU250CL hardness tester employs the latest technology, with closed-loop control for test load application. The modern system for test load application (closed loop) stands out because of its precision. Accuracy exceeds the requirements of all relevant ISO and ASTM standards. Range of Hardness Applications: - Vickers according to ISO 6507, ASTM E384 - Knoop according to ISO 4545, ASTM E384 - Rockwell according to ISO 6508, ASTM E18 - Brinell according to IS0 6506, ASTM E10 Features: • Extremely wide test force range of 0.5 kg to 250 kg • Unique “4-plus-4” turret able to carry up to 4 lenses and up to 4 indenters simultaneously. The turret is also designed to allow testing in hard to reach positions by using a unique vertical rotation mechanism. • Variable dwell times 5-60 seconds • Ability to vary indenter approach velocity • Rockwell depth measured by the market leading Indentec transducer capable of a measuring resolution of 0.1 Rockwell point

The low load Vickers hardness tester ZHV30 conducts Knoop and Vickers hardness tests in accordance to the ISO6507, ISO4545 & ASTM E 384.The test load range is between HV0.2 and HV30. With an an automatic 5 position turret for an indenter it consists of maximum of 4 lenses facilitating the change and selection through the menu buttons. The magnifications of 25x to 500x helps in covering various applications. Integrated microscope and front panel display facilitates quick and easy hardness testing. The dwell times may be easily configured in electronics and test cycle is automatic. The load change is automatic and the test load is selected through the operating panel. Illumination intensity for each magnification lens can be stored individually. PC controlled versions,based on a High Definition software, which are semi automated or fully automated are also available for automated and sophisticated applications.

The ZHV10 is a unit that deals with determining Vickers, Knoop, Ritz, and Brinell hardness levels, case hardening, and nitride hardening depth. This unit is available in two versions, and is fitted with an analog instrument. This allows operators to evaluate the hardness rating based on a table of values. Moreover, this unit is engineered with the capability of dealing with operations that are concerned with loads that range from 0.2 to 10 kg.

The Shore A, D, B, C, D0, 0, 00, 000 electronic hardness tester is ideally used for applications that are concerned with determining the hardness rating of plastics ans rubber. This unit operates in accordance to the standards set by the ISO 7619-1, ASTM D 2240, ISO 868, NFT 51109 and BS 903 Part A26. The testing procedure, however, deems that a 35 mm plane parallel contact surface and a 6 mm material thickness necessary for the procedure.

The Zwick 3103 IRHD micro compact hardness tester comprises of a standard unit with combined electronics and display. It is equipped with a support table that has an adjustable height for the samples. It also has an integral IRHD micro measurement tool in accordance to ISO 48. This tester are applicable for testing O-rings, seals, hoses, and mouldings. Furthermore, the Zwick 3103 is equipped with a 2-line LCD display that presents the measurement period, range, and value. It has a built-in testXpert® testing software that enables transmission of measured value using the RS232 interface.

The ZHU/Z2.5 is the most versatile and flexible hardness testing machine in the world, it has a zwickiLine testing machine with a hardness measurement head which contains a digital travel-measuring system and an exchangeable indenter with sensor foot. It can be used with all ZwickRoell Materials testing machines and in automated applications. All indentation depth measurement method hardness tests, including Martens hardness HM, Rockwell hardness, and ball indentation hardness can be performed. Vickers depth measurement HVT, Brinell depth measurement HBT, and Knoop tests can be performed with an optical unit accessory attached to the head. This unit contains a measuring microscope and a linear displacement component, which allows the microscope and load unit to exchange positions without the need to move any components under test.

The HT1000 and HT2000 have many applications in the primary metals, metal fabrication, utilities, petroleum, chemical, automotive and aerospace industries. Their small size and easy to use, one-handed operation, makes them ideal for testing large and heavy forgings or castings, such as steel mill rolls and turbine housings. Due to their small size and portability, the testers can be used to test individual parts of a large assembly without taking the finished assembly apart. The testers can be used in any direction, and require only a small surface area to obtain a quick and accurate reading.

The ZHU 250 is ideally designed to promote an excellent quality performance and functionality. It is built with an attractive and sophisticated structure used for a very simple and easy operation, direct-viewing and more. It is considered as a versatile tester used for process loading, dwelling and unloading of the test force. It is also constructed with three hardness testing methods specifically the Brinell, Rockwell and Vickers for further variation. It is a fully automated test sequence and a highly accurate closed-loop drive system, together with excellent depth of field. The RS232 connection to testXpert® testing software enables all tests to be evaluated and documented and data transferred to quality assurance systems for further processing. The custom-made accessories tailored to a wide range of applications are also provided.