Test benches - Import export

Dokumentation in der Datenbank

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

The 8661 precision torque sensor is the ideal choice for reliable measurement of static and dynamic clockwise and counter-clockwise torques. Thanks to its high measurement quality and low linearity error, the sensor is equally at home in quality control or research & development. Designed for non-contact operation and zero-maintenance, the 8661 is also ideally suited to the production environment, whether on shift-based production lines, test benches or end-of-line test systems. The 8661 torque sensor is the specialist device for constant torque measurements during continuous operation and for test-bench measurements of holding, friction, break-away or tightening torques. An optional built-in incremental encoder disk with up to 2000 increments makes the sensor the perfect alternative where space or budget rule out an additional angle or speed sensor. For mobile use and for instant digital access to measurement data, the 8661 torque sensor is also available with a USB interface.

Inductive displacement sensors of this series measure linear displacements and indirectly all mechanical values convertible into displacements by additional equipment (i.e. tension and compression forces, extension, torque, vibration). The sensor body equipped with a connector has an outer diameter of only 8 mm and therefore is especially well suitable for the integration in dimensionally restricted structures. Typical application fields are displacement and extension measurements on: —Machines —Servo systems —Motor vehicles —Test benches —Production plants The cylindrical case made of stainless steel, houses a differential transformer (LVDT). It consists of a primary and two secondary coils with axially moveable core. A displacement of this core changes the magnetic induction of the coils. The INLINE carrier frequency amplifier converts the displacement into a direct proportional electrical DC voltage.

The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

When circulating chemicals and pickling baths, reliability, safety and last but not least functionality are important. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid emptying of these liquids from tanks and basins. * available in special immersion depths on request * equipped with self-lubricating, liquid-wetted plain bearings. Features & Advantages * High flow rate * High efficiency * Smooth running * Low space requirement * Easy commissioning * Easy to maintain * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The reliability and safety of a sensor is extremely important, particularly in high-pressure applications such as water-jet cutting equipment and hydraulic circuits. The dynamic loading encountered in these applications requires the use of sensors that are specially adapted for high pressure ranges. It is exactly these tough requirements that are satisfied by the model number 8221 sensor. With dynamic pressures, for example, an unlimited number of measurements can be taken if the pressure lies within the range from 0 ... 70% full scale. Range of applications: —Laboratory —Production —Aeronautical engineering —Cutting equipment —Hydraulics —Test benches Specific characteristics: —Measuring ranges from 0 ... 1000 bar to 0 ... 5000 bar —Accuracy ≤ 0.2 % F.S. —Medium temperature range from - 30 °C ... 120 °C —Ideal for dynamic measurements —Protection class IP66 —Digital calibration with the option of integrated instrumentation amplifier

The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.‌

for liquid lubricants and cleaning agents The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Eccentric screw pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, you can choose from a range of different rotary current motors, which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * also available in special immersion depths * Media examples: viscous cosmetic products, food and etc. Features & Advantages * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Pump Set B1 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life approx. 25 min at maximum speed * 1 battery charge emptied approx. 2 x 200 litre container * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick release fastener * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌ The max. delivery head also depends on the pump design, motor and fluid.‌

This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications. Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings. With no rotating parts, this sensor needs no maintenance when used correctly. Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches. The strain-gauge based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media, such as plasticisers, cold cleaners and lubricants. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources. The set is supplied without battery and charger. * Replaceable, powerful rechargeable battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge empties approx. 12 x 200 litre containers Features & benefits * BLDC motor with high efficiency up to 70% * Infinitely variable * Long battery life * Automatic switch-off in case of overload * Sophisticated quick-release fastener * The max. flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20° C. The measurement is taken at the pump's discharge nozzle, without hose, nozzle or flow meter.

The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. . Exchangeable, powerful battery with Li-Ions . Battery life 35 min at maximum speed . 1 battery charge empties approx. 12 x 200 litre containers . BLDC Motor with high efficiency up to 70% . infinitely variable . high battery life . automatic shutdown in case of overload . sophisticated quick release * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The Drum pump B1 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 25 min at maximum speed * 1 battery charge emptied approx. 2 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

Customized Solution The mobile testing device may be mounted directly on the wheel nuts on any wheel on the car. The height and tilt adjustment allows optimal orientation at the wheel. Additionally, it is still supported by three proximity sensors. The evaluation and control of the testing device accepts a laptop. For easy transport, the device can be disassembled in a few steps. Curve recording and analysis via notebook. The complete unit is height adjustable via a scissors system. This can also be adapted to different shaft height.

Friction measurement on gear with cam recording with service case In order to reduce the frictional torque in a gearbox from the automotive industry, a measuring device that accompanies the development is required. With the DPFR-027, changes in the design can be measured directly on the product. This means that even the smallest improvements can be determined. The field of application of this test device is extremely diverse and can be easily converted to other applications. Thanks to the mobile design, tests can be carried out under different temperatures and climatic conditions. hand-held drive unit compact slim design constant load-independent test speed selectable direction of rotation and speed additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphic recording of the test sequence Storage of the test results in Excel

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

The specimen is cyclically loaded in a cold-heat oven to freely programmed load follow with torque. Rotation angle and temperature are documented with. Applicationfield Automotive industry; Optimization of the granular mixture of rubber elements of a window motor.