Standard parts - Import export

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4026-45H. Dimensions and tolerances depend on the current status of the standard. The threaded pins with hexagon socket have a universal thread and are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts. Moreover, through the universal thread, they benefit from a continuously adjustable magnetic attachment point.

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts.

The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years

The GEMÜ C60 CleanStar ultra pure 2/2-way diaphragm valve has a plastic piston actuator and is pneumatically operated. A stroke limiter and an optical position indicator are integrated as standard. All medium wetted parts are made of PVDF or PTFE. —High purity due to cleanroom manufacturing —High Flow version —High flow rates —Minimal deadleg —Optional flow direction —Also available as T valve —The valve is available with ECTFE union nut as an option. Thus you achieve: brief equipment rinsing times, clearly improved Kv values (High Flow), high "MTBF" and reduced costs

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from special plastic fitted to a galvanised steel tube frame. Innovative and ergonomic cable guide handle "cable pilot" for perfect cable-management during winding. Handle commutes on both sides and allows easy carrying and cable storage. For right and left handed easy to rewind. Rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design protected. / Patent pending. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. Extra stable, shock-absorbing steel tube frame with galvanised steel tube, exclusive stability. Carry handle with comfortable cable guide management during winding. Reel body made of special plastic with reinforced ribbed structure. Rotary handle for comfortable rolling up. The BREMAXX®-PUR cable (BQ cable) is highly resistant to abrasions, crushing, UV light, cutting and tearing. In addition, it is accid-proof, oil-resistant, wheatherproof and microbe-resistant. Remains highly flexible even at low temperature down to -40 °C. BQ cable (PUR) is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Cable length: 40 m Cable: H07BQ-F 3G1,5 Cable quality: BREMAXX®-PUR Cable colour: Orange Reel-Ø: 290 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. Extra stable, shock-absorbing steel tube frame with galvanised steel tube, exclusive stability. Carry handle with comfortable cable guide management during winding. Reel body made of special plastic with reinforced ribbed structure. Rotary handle for comfortable rolling up. The BREMAXX®-PUR cable (BQ cable) is highly resistant to abrasions, crushing, UV light, cutting and tearing. In addition, it is accid-proof, oil-resistant, wheatherproof and microbe-resistant. Remains highly flexible even at low temperature down to -40 °C. BQ cable (PUR) is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Cable length: 25 m Cable: H07BQ-F 3G1,5 Cable quality: BREMAXX®-PUR Cable colour: Orange Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the unique Bretec® Anti Cable Twist System for comfortable working. Reel body made from highly break-resistant, special plastic on a particularly sturdy frame. With hinged rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design Patent. Cable length: 25 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 240 mm

For universal outdoor use according to BGI 608 and use permanent on sites, IP 44. With the perfect Quick &amp; Easy Rewind System ROL´UP and the unique Bretec® Anti Cable Twist System. Reel body made from highly break-resistant, special plastic on a particularly sturdy frame. With hinged rotary handle for comfortable rolling up. RN cable is approved to exacting site standards as per VDE 0100 part 704. 3 water-jet protected earthed socket outlets with self-closing protective caps. Thermal cut-out protection, indicator shows overheating or overloading. Design Patent. Cable length: 40 m Cable: H07RN-F 3G1,5 Cable quality: Rubber-Neoprene Cable colour: Black Reel-Ø: 290 mm

Robustness, accuracy, and simplicity are attributes characterizing this ultrasonic welding machine. The entry-level models already include a position measuring system and proportional valve technology as basic equipment. Moreover, password protection and part counter are standard. Precision guiding rails and reliable drive components ensure repeatable welds.

The core technology is a robust, water-cooled travelling column. With increasing depth of immersion into the material, the guide carriage distance grows and this leads to advanced rigidity. The stepped drive guide ensures a perfectly constant geometry along the Z axis. This in turn guarantees maximum rigidity in sensitive areas of the workpiece. Used in combination with the highly dynamic Zimmermann milling heads, the FZH400 ensures an extremely efficient milling process during the machining of aluminum and composites. The versatility of the M3ABC 3-axis milling head improves efficiency due to the maximized material removal rate, in particular when machining structural parts. An integral standard component of the FZH400 is its pallet handling capability with an area for setting up pallets during machine operation. The newly developed handling system permits the reliable transportation of the pallets, is suitable for longer pallet lengths, and can be extended without difficulty.