Stainless steel designs - Import export

The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available

This force measurement chain was developed for applications where a low cost solution is more important than achieving high levels of accuracy. The sensors strain gauge technology allows the measurement of static and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring chain suitable for a wide range of applications, such as Industrial manufacture Manufacture of customized machinery Geological investigations Motor vehicle engineering Commercial agriculture Bridge building The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. The domed form, however, minimizes the effect of a force that is not exactly axial.

Magnetic absolute multi-turn rotary encoder in heavy-duty stainless-steel design – batteryless, robust and flexible. The WV42HD is predestined for demanding measuring jobs in the heavy-duty area owing to its extremely robust housing,  its bearings, which are designed to tolerate high radial and axial loads as well as its high resistance against external impact. Heavy-duty design in stainless steel. Compact design (42 mm diameter). IP69K, IP68 protection category. Resistant to salt spray and acids. CANopen interface, SSI, analog. Multi-turn without battery. High shaft loadability of up to 270 N. 16 bit mult-iturn (65536 revolutions). 12 bit single-turn (4096 steps).

Profile WV42HD: Heavy-duty design in stainless steel Compact design (42 mm diameter) IP69K, IP68 protection category Resistant to salt spray and acids CANopen interface, SSI, analog Multi-turn without battery High shaft loadability of up to 270 N 16 bit mult-iturn (65536 revolutions) 12 bit single-turn (4096 steps)

Support sleeves for reinforcing plastic components. Made of stainless steel with customised design. The bushings can be produced not only round but also oval as a deep-drawn part.

Electromechanical load receptor without lever work entirely made of s/s for wall mounting The wall mounted scale with folding table iL Special 150T/SP is an electromechanical load receptor w/o lever work entirely made of 1.4301 stainless steel designed for wall mounting. Depending on the installation location, a variety of fixture elements are available for optional attachment using pins, injection anchors or threaded rods. This wall-mounted scale has a folding stainless steel platform and an integrated rear panel.

The Nova cooling tanks by FESSMANN convince with their highquality processing and special hygiene designs. This means Allround jointfree welding, use of special antidirt edges and a tank bottom inclined towards the drain. This way, dirt deposits are a thing of the past and cleaning becomes child's play! Unique heat insulation ensures best efficiency Volume can be chosen between 300 – 1000 l Hygienic stainless steel design with antidirt edge Delivery in prefabricated construction considerably shortens the assembly times

With its unique heat insulation, the NOVA cooking boiler not only ensures best energy utilisation but also offers uniform heat distribution across the entire boiler bottom for consistently best cooked products. For you, this means a quality increase at reducing costs. Unique heat insulation for best efficiency Uniform heat distribution ensures reproducible cooking processes Various heating types available Volume can be chosen between 300 – 1000 l Hygienic stainless steel design with antidirt edge DPK control included serially Delivery in prefabricated construction considerably shortens the assembly times

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03

• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged stainless steel design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03