Sprays - Import export

Spraying over your head is not possible with standard spray bottles. As soon as the suction tube is no longer immersed in liquid, you can't spray any more. No so with our overhead spray bottle Turn'n'Spray. It features a special technology that allows you to spray from any position. That means you can spray practically and conveniently from any direction and reach hard-to-access places easily and without straining. The high-quality, refillable quality spray bottle can be used again and again.

For tar or hot bitumen at temperatures from –25°C to +200°C. With additional spiral for maximum safety and highest possible flexibility. Construction: Special NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral abrasion-resistant CR-cover interior and exterior smooth, fabric patterned Please follow the safety regulations for bitumen hoses! Tar spraying hose Bitumen hose Sold by the roll or cut to length with cuffed ends and/or widened hose endings. Also available as heatable version or per DIN EN 13482. Other versions and dimensions on request.

automatic spray guns for precise coating and various application areas

large portfolio for the internal coating of cans and tubes

Pressureless spray bottle made of LDPE with long-life hand pump. The functioning of each individual sprayer is tested during manufacture. Areas of application: Industry, laboratories, production, leisure, household. Suitable for agricultural pesticides and detergents.

Universal spray head where the spray quantity is set via a scaled measuring drum. This makes it possible to check the set quantities at any time. Any changes are immediately visible and can be corrected. With constant parameters (fluid, spray and fluid pressure), the quantity is always 100% reproducible. The supply line exits at an angle of 90° to the spray jet. Our LEO spray head is available in two variants: The LEOR spray head has an M5 thread for fastening to a customer-side mount. The LEOB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. Low pressure range from 0,5 - 2,5 bar Air consumption from 2 -5,5 /min Viscosity range from 2.300mm²/s (20°C) - 500 mm²/s (40°C) Spray with nearly round cone full of about 15 ° Available in the nozzle lengths 30, 70, 105, 130 und 155 mm

Small but powerful. Our power pack The smallest spray head available in the HPM standard range. Suitable for tight installation situations. The quantity is set on the back. The desired quantity can be reliably set using safety bolts. The supply line exits at an angle of 90° to the spray jet. Our PSM spray head is available in two variants: The PSMR spray head has an M5 thread for fastening to a customer-side mount. The PSMB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts

Our absolute classic. Probably the most frequently sold spray head in the world. Universal spray head, very robust and suitable for all applications. Due to the large channel diameters and a direct supply, our HTR spray head can also be used with especially critical and viscous media. The quantity is dosed in the front at the nozzle. Our HTR spray head is available in two variants: The HTRR spray head has an M6 thread for fastening to a customer-side mount. The HTRB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. All of our spray heads are available individually or as a spray head group. The spray head group contains air and fluid connections (check valve) for the distributor. An optional check valve mounted on the spray head prevents the fluid from dripping out through the spray head in the case of a critical line route or critical positioning

Suitable for water-based paint strippers with operating temperatures of up to 90 °C. Modular design for the highest level of safety and (if needed) customization to the desired height of the spraying chamber. Electronics and paint stripping agent tank in separate "technical module." Uniform coating of the workpieces through the use of a nozzle system in the spraying chamber, consisting of needle-nose jet nozzles and flat-jet nozzles and a rotatable cage for the workpieces. High loading capacity by virtue of the cage diameter of 1500 mm and effective interior height of 2100 mm; max. cage load: 750 kg. Stripping agent tank: 1000 liters for long effective life of the medium, indirect electrical heating. All parts coming into contact with the media are made of stainless steel. Easy operation with clearly arranged displays and operating controls. High-quality Siemens control for monitoring the paint stripping process.

HVLP Spray Gun ABAC PN 1A for ABAC SG2000 and SG2500 HVLP Paint Spraying Units, with Intermittent Air Supply, 3 Nozzles 1,0- 1,5 -2,0mm Dia, 0.7 l Aluminium Paint Container, Nozzle Spanner Professional and reliable equipment of high quality. Made in Germany, components only from European manufacturers. 2-year warranty. Minimal overspray, "low-misty" spray, minimal material loss, paint transfer coefficient up to 90% possible. Reduced set up and cleaning times, reduced maintenance costs. Plenty of additional nozzles from 0.2 (NANO) to 3.0 mm in diameter Technical Data: Maximum permissible operating pressure: 0.45 bar; Size: 180 x 110 x 350 mm; Weight: 0.76 kg.

"Made in Germany" ABAC HVLP Paint Spraying System SG 2000: Motor Blower ABAC SG 2000, Spray Gun ABAC PN 1A, Air Hose 6 m., Dipper for Viscosity Checks, 2 Spare Intake Filters. Scope of Supply: Adjustable low-pressure motor blower SG 2000 with continuous pressure regulation and 5 m connecting cable. Spray gun PN 1A with intermittent air supply, with 3 nozzles 1 - 1,5 - 2 mm and 0,7 I aluminium paint container. Nozzle spanner. Special air hose 6 m. Dipper for viscosity checks. 2 spare intake filter. Manufacturer: Geheit GmbH (ex CHIRON) Motor power: 1200 Watt Voltage 230 volts or 115V Flow Rate 2800 Litres Per Minute Air Flow Capacity 2.8 Cubic Meters per Minute Maximum Pressure 0.31 Bars Sound Level 81 dB Hose Length 6 Metres Cord Length 5 Metres Spray gun- anodized aluminum 0,7L

"Made in Germany" HVLP Spray Gun ABAC PN 2A for ABAC SG90, SG2000 and SG2500 HVLP Paint Spraying Units, with Continuous Air Supply, 3 Nozzles 1, 1.5 and 2 mm Dia, 0.7 l Anodized Aluminum Paint Container, Nozzle Spanner Manufacturer: Geheit GmbH (ex CHIRON) Box Size: 37x17x12cm Weight:1,2 kg

" Made in Germany" ABAC HVLP SET - HVLP turbine ABAC SG90 electronic, HVLP spray gun ABAC PN2A (nozzle 1,0-1,5-2,0mm); air hose 6m, shoulder strap, viscosity measuring cup, 1pc. reserve filter for turbine. Manufacturer:Geheit GmbH (ex CHIRON) Voltage230 volts or 115V Flow Rate2300 Liter Per Minute Air Flow Capacity2.3 Cubic Meters per Minute Maximum Pressure0.22 Bars Sound Level80 dB Hose Length6 m Cord Length5 m Spray gun- anodized aluminum 0,7L