Sls - Import export

• According to IEC/EN 62 020 • for AC and pulsating DC currants Type A to IEC/TR 60755 • 9 tripping values from 10 mA to 10 A or from 10 mA ... 30 A • Frequency range 20 ... 2000 Hz • Selection of manual or automatic reset • With prewarning • With test and reset button • Broken wire detection • Short reaction time • With adjustable delay tv • De-energized on trip • LED indication for auxiliary supply and state of contact • 2 x 1 changeover contact • With sealable cover • Devices available in 3 enclosure versions: SL 5882: 100 mm deep with terminals near to the top to be mounted in cabinets with mounting plate and cable ducts - width 35 mm - for connection of external residual current transformer, e. g. DOLD ND 5016, ND5019

• According to DIN 19235 • Common alarm annunciator • Expandable from 4 up to 160 inputs • Open circuit inputs / closed circuit inputs selectable via bridges X1-X2 • Delayed inputs up to 10 s • Acknowledgement push button QH for external buzzer built in • Accessories: Buzzer IK 8832, SK 8832 • Devices available in 2 enclosure versions: I-model: depth 61 mm, with terminals at the bottom for installations systems and industrial distribution systems according to DIN 43 880 S-model: depth 100 mm, with terminals at the top for cabinets with mounting plate and cable duct • Width 35 mm Fault annunciator IL 5990, SL 5990: • 4 inputs with LED on control unit • 1 output for common signal and 1 output for audible alarm

Ideal for in- and outdoor, IP 54. LED-Spot with 28 super bright SMD-LEDs. Low heat generation, no danger of injury. SMD LEDs have a very long lifespan, are shock-proof and maintenance-free. Die-cast aluminium casing. Spotlight mechanism can be swilled and locked. Extra stable and robust tripod. Strong tubular steel, powder-coated. Telescopic from 0.9 - 2 m. Handy and reliable tube clamping nuts. Three sturdy legs. 3 m oil-resistant rubber-neoprene cable with grounding-type plug. With ON/OFF switch. In colourful display-packaging. This luminaire contains built-in LED lamps. Light unit not replaceable. Cable length: 3 m Cable: H05RN-F 3G1,0 LEDs: 28 x 0,6 W Power: 20 W Luminous flux: 1720 lm Lamp efficacy: 86 lm/W Colour temperature: 5700 K Energy efficiency class: A

Ideal for outdoor use, IP 65. Tripod with high-power COB LED light, with extra-wide light diffusion to illuminate a large area. Low heat generation, no danger of injury. Chip LEDs have an extremely long lifespan, are shock-proof, maintenance-free. Die-cast aluminium casing. Extra stable and robust tripod. Strong tubular steel, powder-coated. Stepless height adjustment from 0.8 m to 1.62 m. Handy, reliable locking screws. Three sturdy legs. In colourful display-packaging. This luminaire contains built-in LED lamps. Light unit not replaceable. Cable length: 5 m Cable: H07RN-F 3G1,0 Power: 50 W Luminous flux: 4230 lm Lamp efficacy: 87 lm/W Colour temperature: 6500 K Energy efficiency class: A+ Plug-in system: DE + CZ

Thanks to its maintenance-free high-power LED technology, the SL spotlight with flexible tube impresses for its extremely long service life. The robust aluminium housing will withstand even the tough environment of working machinery. — LED technology — Colour temperature neutral white 5000 K — Colour rendering index > 70 — 10° or 30° angle of illumination — Housing made of die-cast aluminium painted black — 3 mm thick safety glass — Flexible tube — Maximum allowed ambient temperature Ta max 40° C — LED service life (L70) > 50,000 h — Switch in the light head for On/Off — Degree of protection IP67, protection class II (with plug-in power supply) or III (without plug-in power supply) — Supplied with approx. 3 m connecting cable and plug-in power supply with plug type CEE 7/16 (Euro plug), BS 1363 and NEMA 1-15P or free stranded wire ends — Various fasteners as accessories

Lifting, transporting and tilting drums and bins is a typical task especially in the chemical and pharmaceutical industrie as well as in food manufacture. SERVOLIFT, the original handling system, has been manufactured for approximately 30 years. It provides decisive advantages thanks to its two arms: unhindered view of the transport materials, exact and safe operation, uncompromising compliance with all hygiene requirements as well as a higher degree of reliability and cost effectiveness. Strong, maneuverable and easy to operate: the new SL 250 Technical description Free view of the carried load Loads up to 350 kg Explosion protection for zones 1/21 and 2/22 Lift up to 4,250 mm GMP-compliant construction, easy to clean and completely manufactured of stainless steel Faster and easier exchange of the gripper system for various drum types Space-saving due to its very compact design Very maneuverable in confined spaces Can be used everywhere due to its low weight Extendable versions...

Spanners for Milling Arbor Nuts

The KKF3-SL, a universal chamfering and contour milling machine, has a measuring head attachment. Tools with a shaft diameter from Ø6-12 mm can be clamped in the milling cutter support. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with optional guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can optionally be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 6mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle.

The KKF4-SL, a universal chamfering and contour milling machine, has an ER collet chuck. Tools with a shaft diameter from Ø6-12 mm can be clamped. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 4mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle. The KKF4-SL has speed regulation that is very useful for the processing of aluminum or stainless steel.

The tub vibratory finishing machine, which has a size similar to a washing machine, with a fill volume of 70 l is our standard machine and is ideal for prototypes and small series. A noise protection cover reduces the noise and makes it possible to work in a workshop. The right and left-hand circulation as well as speed regulation from 1,500 to 3,000 rpm provide for various processing possibilities. The abrasive material and workpieces are rotated through the generated vibration. The desired processing process is created through the contact of grinding bodies on workpieces. The programmable timer rounds off the autonomous work process. The machine has a modular construction and can be expanded with an optional paper filter and separator. Both are controlled centrally through the control panel on the TV 95-SL. We recommend the PF440 paper filter for simple and comfortable water treatment. The S95 separator simplifies the separation of grinding bodies and workpieces.