Results for
FÖHRENBACH GMBH
Germany
The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The RH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 mm scale gradation. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The RE line is equipped with end plates and suits for the attachment of stops, micrometers, cylinders etc. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The RS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FÖHRENBACH GMBH
Germany
The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.
Request for a quoteFÖHRENBACH GMBH
Germany
The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.
Request for a quoteFÖHRENBACH GMBH
Germany
Type MR - roller bearing mounted slide /Typ MS - dovetail slides Positioning accuracy: 0,001 - 0,1 mm according to the spindle used and the feedback system Drive: Stepping or direct-current motors
Request for a quoteFÖHRENBACH GMBH
Germany
The SM line is equipped with a knurled micrometer knob with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.
Request for a quoteFÖHRENBACH GMBH
Germany
The SE line is equipped with end plates and suits for attachment of stops, micrometers, cylinders etc. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.
Request for a quoteFÖHRENBACH GMBH
Germany
The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides. Even under high loads they assure smooth running operation, free from play and guarantee an extremely precise lengthwise motion. As compared to guide rails (dovetail type) they enable exact and easy displacement of parts, free from play.
Request for a quoteFÖHRENBACH GMBH
Germany
The SK line is equipped with a cross type crank handle and, from size 300 on, with a hand wheel. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.
Request for a quoteFÖHRENBACH GMBH
Germany
The SH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 400 can, on option, also be furnished with a 0.01 mm scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.
Request for a quoteResults for
Sliding roller - Import exportNumber of results
15 ProductsCompany type
Category