Results for
IDG-DICHTUNGSTECHNIK GMBH
Germany
With internally protected sealing lip. With O‑ring for sealing in the groove base. For high peripheral speed and increased chemical resistance
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Types RWDR‑A, RWDRAS, RWDR‑B, RWDRBS, RWDR‑C, RWDRCS
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
High pressures at relatively low speed. For fluids over a wide viscosity range and for gases. Rotary unions at high pressure. Robot axes
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
High termat or chemical specifications. Medium pressure and low speed. Suitable for almost all fluids. Robat axes, Rotary unions.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Types 231 to 238 are used for lubricating fluids and to a limited degree also for dry running and purely rotary or oscillating motion. They are only partly suitable for helical motion.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Motor shafts. Gear and frive unit shafts. Fan shafts. Clamping tools. Applications at high speed and lo pressure.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Applications at high speed and low pressure. With O‑ring as secondary seal for sealing in the groove base. Hygienic design without undercuts. No sump formation in front of the seal. Reduced heat buildup due to special lip design. Pressureactivated seal energization. The integrated wedge prevents the sealing lip turning inside out. Very long seal life due to high abrasion resistance. Material only generates low frictional force. Sealing lip does not stick to the mating surface even after prolonged shutdown
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow stop less than 0.05 l residual amount in 200 l drum possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (mmersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Product attributes: - Pump with mechanical seal - Switch lever to close the backflow valve / foot valve - Pulsation-free transfer - Transfer against closed valve (e.g. hand nozzle) possible - Radial shaft sealing ring prevents intrusion of vapours and liquids into the coupling area Benefits: - Less than 0.05 l residual amount left in 200 l drum - Universally and flexibly applicable - Reduction of cleaning and waste disposal costs - Optimal use of fluids - No loss of medium when taking the pump from drum to drum
Request for a quoteSIKO GMBH
Germany
Designed for large diameters. Hollow shaft, max. Ø 30 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof.
Request for a quoteSIKO GMBH
Germany
Hollow shaft, max. Ø 14 mm. Counter with 4 decades and fine reading. Detent as an option. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V HD-D Industrywith circulation/flushing connection for three-phase motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2
Request for a quoteSIKO GMBH
Germany
Most-used size in slim design. Hollow shaft, max. Ø 20 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V HD-SR Industrywith circulation/flushing connection for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V HD-SR Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V-D Industryfor three-phase motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with Mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V-D 12.1 Eccentric screw pump in the industrial version is a powerful positive displacement pump for medium, highly viscous and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials. * Uniform volume flow * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2
Request for a quoteSIKO GMBH
Germany
Profile DA10: Designed for large diameters Hollow shaft, max. Ø 30 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof
Request for a quoteSIKO GMBH
Germany
Basic device with 5 decades Profile DA09S: Most-used size in slim design Hollow shaft, max. Ø 20 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Magnifying function for good readability Stainless-steel driving shaft as an option Axial seal, dustproof and splash-proof Clamping plate (see accessories)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BOLZ PROCESS TECHNOLOGY GMBH
Germany
COMBER Pressofiltro® - Series PF 2000 - PF 16000 Chemical design Chemical design Pressofiltro® agitated Nutsche filters, suction filters or filter dryers are versatile units equally suited for monoproduction applications and for multipurpose production facilities. Special properties for the customer’s benefit: Available as closed units with manhole access or with an openable filter base Multilayer and/ or conventional filter materials Good emptying characteristics due to narrow agitator to wall/ bottom clearances and a unique agitator blade design Shaft seal with externally accessible stuffing box
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
Series CCM (100 - 20,000 liters) The Cylindro Conical Mixer CCM with a central shaft agitator is a batch mixer for more standarized mixing applications with rather low TCO (Total Cost of Ownership). With its robust central-shaft agitator it is pricewise an alternative to the conical screw mixer and besides powder/bulk solids also suitable for pasty products. Due to its compact design the mixer is particularly suitable when space is limited, especially for a narrow room height. Special properties for the customer’s benefit: Short mixing times because all product of the batch is permanently in motion Speed of the helix mixing element can be adapted to the process needs Useful working volume from 15 – 70% of the gross volume Adjustable clearance between helix/blade and vessel wall or bottom outlet Wide range of applications for powders, liquids and pastes Very good discharging Shaft sealing and bearing are installed outside of the mixing chamber ATEX design and EHEDG compliant design
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
COMBER Pressofiltro® / Turbodry® Series PF/TD 5 - PF/TD 100 This Pilot Plant can either be used as Agitated Nutsche Filter/Filter Dryer or a Vacuum Dryer. Designed for processes in pilot plants, it is fully equipped for tests and trials and can as well be used for small scale production. Special properties for the customer’s benefit: Calculation, manufacture and design are in accord with Pressure Equipment Directive 97/23/EG or/and ASME U-stamp as well as with cGMP and FDA guidelines Approved for using in ATEX danger zone, group II 2G 2D (zones 1/ 21) Suitable as vacuum dryer, filter dryer or agitated nutsche filter Shaft seal through gland nut Device built on skid Control system protected against explosion (EEx-d) Options Multilayer PLC-system
Request for a quoteFRANZ EISELE & SÖHNE GMBH & CO KG
Germany
Key data: With hydraulic drive 7.5 to 33.5 kW Stable design, highly wear resisting mechanical seal, shaft in an oil bath The fluidic optimised double blade wide-blade propeller is dimensioned as a pitch propeller with a very high mixing performance. Due to the hydraulic drive, the HP slurry mixers are independent from the power supply and have a favourable purchasing price.
Request for a quoteFRANZ EISELE & SÖHNE GMBH & CO KG
Germany
Application possibilities of the Eisele slurry mixer are only in the agricultural sector. Key data: Double-start worm forced circulation With PTO-drive 30/48 kW or with electric motor 11/15/18.5 kW Threaded spindle with crank Three-point mounting, can be tipped Stable design, highly wear resisting mechanical seal, shaft in an oil bath Agitation shaft length 3,50 – 6,00 m A higher circulation rate is forced by the double-start worm. A reversing gear can also be mounted for running to the right or left which also permits use without effort under hard conditions. The three-point mounting is used for the quick and simple conversion using the tractor hydraulics. The fastening block also allows stationary installation. The PTO-drive is also a component of the ZQU.
Request for a quoteFRANZ EISELE & SÖHNE GMBH & CO KG
Germany
Application options for the Eisele PTO mixers can be found in industrial businesses and in the agricultural sector. More detailed key data here: Double-start worm forced circulation (sucking) With PTO-drive 30/48 kW or with electric motor 11/15/18.5 kW Threaded spindle with crank Three-point mounting, can be tipped Stable design, highly wear resisting mechanical seal, shaft in an oil bath Agitation shaft length 3,50 – 6,00 m Application possibilities of the Eisele PTO mixers are in industrial business and agricultural sectors. They are the perfect solution for the effortless mixing in slurry tanks or similar using a tractor or other towing vehicle.
Request for a quoteFRANZ EISELE & SÖHNE GMBH & CO KG
Germany
The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. More detailed key data here: Dry self priming - dry-running safe - sucks without auxiliary fluids Sealing of the shaft using highly wear resisting mechanical seal Blockage-free due to open impellers - non-sensitive for the use on construction sites, in the municipal and industrial sectors Mobile or on carriages with three-phased motors of 3.0 / 5.5 / 11.0 kW With diesel engines 3.0 / 6.5 / 12.5 / 22.0 kW output up to 234 m³/h For PTO-drives 15 - 40 kW Output up to 360 m³/h The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. Areas of application are, next to industrial and handicraft businesses, also in ship construction and for emergency services. They are suitable for draining ponds, shafts and construction pits as well as for ground water lowerings, or for pumping waste water.
Request for a quoteNEUGART GMBH
Germany
The PFHE represents an economically attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed inclined roller bearings and a flanged output shaft in accordance with EN ISO 9409-1 gives the PFHE a very high load capacity. Thanks to the radial shaft seal that is used, this gearbox achieves protection class IP65 at the output side and can therefore also withstand adverse usage conditions.
Request for a quoteNEUGART GMBH
Germany
The integrated gearbox/pinion combination provides the best technical coordination for rack and pinion drives. Numerous solution options provide high dynamics and high load-bearing capacities at the same time because of the precision gearing The PFHE represents an economically attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed inclined roller bearings and a flanged output shaft in accordance with EN ISO 9409-1 gives the PFHE a very high load capacity. Thanks to the radial shaft seal that is used, this gearbox achieves protection class IP65 at the output side and can therefore also withstand adverse usage conditions.
Request for a quoteResults for
Shaft seals - Import exportNumber of results
27 ProductsCompany type