Settings - Import export

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of acids. * Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * wear-free, particularly low-noise BLDC motor *optimized drum emptying * Optimized Drum emptying *infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

for liquid lubricants and cleaning agents The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for withdrawing or transferring concentrated acids and alkalis. * Examples of media: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. *Pump tube equipped with Lutz original handwheel *1 battery charge = 12.6 x 200 liter container in 14 min* * determined with pumping unit PP 41-L DL at full speed Features & Advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * long service life

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping even out of narrow openings. The pump kits consists of pump with motor, 1,5 m hose and hand nozzle. Product attributes: - Connection motor and pump via quick-action coupling - Sealless in the liquid area - Small outer tube diameter - Holding hook for hand nozzles at the pump discharge - Low weight Benefits: - Motor easy to remove - Several pumps can be operated in series with one motor - Also suitable for filling smaller quantities - Can transfer from narrow-necked and containers difficult to access - Minimal force required to change drums - Hand nozzle always quickly at hand due to holding hook - Low storage space required

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The electric pump set is suitable for low to high viscosity media in the food & pharmaceutical sector and is perfect for dispensing or transferring foodstuffs. * Pump tube equipped with Lutz Original handwheel Features & advantages * optionally with electric or compressed air drive * lubricant-free: therefore no contamination of the pumped medium * facilitated and accelerated emptying processes * universally resistant ETFE shaft bearing * easy disassembly: maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.

The pump-kit MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor. Product attributes: - For pumping out of IBCs directly from the outlet (with standard S60 x 6 thread) - Simple connection of the pump to the outlet by union nut - Compact design - Can be dismantled into two parts via clamp - Low overall weight of 1.2 kg - No need to mount pump to top of container - Does not require access to the container from above - Ideally combined with commutator motor or compressed-air motor Benefits: - Can be used where ceilings are low - Allows pumping directly from floor-level outlets, even when containers are stacked

The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle. Product attributes: - Sealless in the liquid area - With mains connection - Powerful commutator motor with brushes - Ergonomic design handle - Low weight - Small outer tube diameter - Holding hook for hand nozzle at pump discharge - With integrated holder for the pump Benefits: - Also suitable for transferring smaller quantities - Can pump out of narrow-necked containers - Minimal force required to change drums - With mains connection - enables very long operating times - High operational safety due to overload cut-out switch - Easy single-hand operation - Hand nozzle always quickly at hand due to holding hook - Low storage space required

Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, hose, hand nozzle and compression gland. Driven either by commutator motor F 460 or compressed-air motor F 416. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools into two parts Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into the inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube material aluminium, optionally with commutator motor FEM 4070 (500 Watt) or commutator motor F 457 (800 Watt) available; furthermore are enclosed: hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart into two parts without tools Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit to pump high flammable media out of 200 l drums or IBCs. Comprising drum pump F 424, outer tube in stainless steel, hose, hand nozzle and compression gland. As drive either the commutator motor F 460 or compressed-air motor F 416 are available. Product attributes: - No seal in the liquid area - Ex protected - Free from wear - Relief openings provide the same fluid level inside the pump compared to the drum content Benefits: - Non-sensitive to dry-running - No seal wear - No bearing wear - No contamination of the medium from lubricants or wear of seal materials possible - Medium cannot be contaminated by lubricants - Low wear and maintenance - Built to last - For use in hazardous area - Motor also available with speed control

Pre-assembled pump kit for food and pharma in ex-version. The pump-kit is ideal for frequent medium changes and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Comprising drum pump FP 430 Ex FOOD, outer tube stainless steel, commutator F 460 Ex, hose, hand nozzle, hose connection, compression gland and earth cable. Product attributes: - With mechanical seal for sealing the inner tube - Pump can be disassembled into two parts: inner tube cpl. and outer tube - Grease-lubricated shaft bearing Benefits: - Ideal for frequent medium changes, hardening media, fast drying media, crystallizing media - Can be taken apart into main components easily and quickly for cleaning - Compared to sealless pump higher service life on abrasive media - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Pre-assembled pump kit for food and pharma. The pump-kit is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. Comprising drum pump FP 427 FOOD, outer tube stainless steel 1000 or 1200 mm, commutator motor F 458, hose, hand nozzle, hose connection and compression gland. Product attributes: - Sealless in the liquid area - Minimal dead spots - Can be taken apart completely in only a few steps - Disassembly almost without tools possible Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21 - Also available for the ex-area with drum pump FP 430 Ex FOOD

Pre-assembled pump set for pumping concentrated acids from 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, outer tube in polyvinylidene fluoride and commutator motor F 458, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be fast and without tools disassembled into two parts - Steel core in the inner tube prevents longitudinal changes at high and low temperatures - Robust motor with aluminium housing and special corrosion-resistant painting - Motor is completely closed Benefits: - No medium gets into the inner tube of the pump - No carrying-over of the medium - one pump can be used for different media - Pump can be quickly and easily cleaned - No corrosion on motor due to aggressive vapours

Pre-assembled pump kit to pump alkalis of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising sealless drum pump F 424 with outer tube in polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland. Product attributes: - Non-sensitive to dry-running - No seal wear - No bearing wear - Low maintenance - Built to last Benefits: - No seal in the liquid area - No contamination of the medium from lubricants or wear of seal materials possible - Free from wear - Relief openings provide the same fluid level inside the pump compared to the drum content

Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools - Inner tube with steel core - prevents longitudinal changes at high or low temperatures Benefits: - Easy disassembly - Universally and flexibly applicaple - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow stop less than 0.05 l residual amount in 200 l drum possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (mmersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Product attributes: - Pump with mechanical seal - Switch lever to close the backflow valve / foot valve - Pulsation-free transfer - Transfer against closed valve (e.g. hand nozzle) possible - Radial shaft sealing ring prevents intrusion of vapours and liquids into the coupling area Benefits: - Less than 0.05 l residual amount left in 200 l drum - Universally and flexibly applicable - Reduction of cleaning and waste disposal costs - Optimal use of fluids - No loss of medium when taking the pump from drum to drum

Pre-assembled pump kit to pump cleaning agens and disinfectants out of 60 l hobbocks. Comprising drum pump F 424, outer tube in polypropylene with commutator motor FEM 4070. Fume gland to protect operator and environment of dangerous vapours. Furthermore, hose and hand nozzle are included. Product attributes: - With fume gland - Immersion length 800 mm - No seal in the liquid area - No contamination of the medium by lubricants - Free from wear - Relief openings provide the same fluid level inside the pump compared to the - drum content Benefits: - No risk of vapours escaping - Immersion length adjusted on 60 l hobbocks - Optimum centre of gravity - the container does not fall - Non-sensitive to dry-running - No seal wear - No bearing wear - No contamination of the medium by abrasion of sealans - No contamination of the medium by lubricants - Low maintenance - Built to last

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the removal or transfer of foodstuffs. * Pump tube equipped with Lutz Original handwheel Features & advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents. * Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc. * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

High-precision angle measuring system with +/-0.1s accuracy for measuring and calibration applications. The signal sampling is done by an interferometric operating principle (laserscale) The graduation period is 1µm, the generated signal period of the output signal is 250nm. Scale errors are self-compensated by using six reading heads in a special arrangement. The measured values can be output in csv format via the USB interface. The software for measured value acquisition and storage is included in the scope of delivery.

Custom designed tool for secondary injection testing of Rec15/25 protection and automation functions.

The stenter is the heart of textile finishing. It develops more and more into a multipurpose line for the production of technical textiles and other webshaped materials. Several thousands of BRÜCKNER stenters are in use all around the globe. Every day they are stentering, drying, heatsetting, functionalizing and coating incountable meters of the most different fabric types. Since many decades BRÜCKNER stenters stand for highest quality and performance and are producing sustainably and energyefficiently. The most important benefits of these stenter frames are highest drying performance and process control matching any type of fabric due to the technically mature and proven splitflow air circulation system, very homogeneous air flow and temperature distribution due to alternately arranged thermo zones, very low specific energy consumption, extremely robust chains, chain rails, pin bar carriers and clips, needing only little maintenance.

Toilet brush set in solid stainless steel (AISI 303), satin finished, for surface mounting. Concealed antitheft twopoint rosette wall mounting. Brush head replaceable, cup removable with internal stop bolt for optimum brushposition. Delivery includes fixing material. Dimensions 97 x 391 x 129 mm