Pressure regulators - Import export

Fuel pressure regulator for stepless adjustment of the fuel pressure.

Compact series pressure regulator with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar

- stainless steel 1.4301 - working pressure von 2 bis 10 bar - pressure range von 2 bis 8 bar - flow-optimised - fine adjustment of pressure - quiet operation - suitable for water and air applications - 1/8 inch thread

The optical contact angle meters of the OCA series are high-precision measuring systems for the characterisation of interfaces and surfaces. They combine high-resolution optics, pinpoint liquid dosing and precise sample positioning to create powerful, reliable measuring systems. The special model OCA 25-PMC is based on the OCA 25 standard model. With its high-pressure measuring chamber, the special model OCA 25-PMC offers the possibility of carrying out measurements of interfacial tensions and contact angles under high-pressure of up to 750 bar and at temperatures between -30 °C and 200 °C. This makes the OCA 25-PMC the ideal solution to investigate, for example, the interfacial tension between a surfactant solution and crude oil in reservoir conditions. It is also possible to determine the contact angle, for example, between rock, oil, and surfactant solution.

This differential pressure transmitter in a control panel housing is suitable for use as a 2- or 3-point controller thanks to its two integrated limit contacts. These permit the realisation, e.g. of ventilation controls, at low cost and without the need for additional electronics. Both the threshold values and the hysteresis for the controller are easy to set via the front keyboard. The display provides readings of measurement values directly on-site in Pa, kPa, inchH2O or mmH2O as well as information about the output states of the limit contacts. An adjustable time constant (up to 10 s) allows the instrument to generate an attenuated output signal, even under fluctuating pressure conditions. Cyclical self-calibration of the zero point ensures a high level of measurement accuracy. The instrument is available with an ISO factory calibration or DAkkS calibration certificate (optional).

Pressure regulator of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1 bar: 2050 to 6200 Nl / min Pressure range up to 15 bar

Pressure regulator of the compact series, quick exhaust Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar

Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment

SnowPack® enables you to obtain a -79 °C dry ice tablet weighing 50 or 250 g within a few moments, without complicated technology and without electricity! You can therefore obtain low-cost cooling to very low temperatures at any time you like. SnowPack® is often used in hospitals, universities, schools, institutes, laboratories, in the chemical industry and in materials testing facilities. Examples of use: Lowering the temperature in cooling baths or cold traps, pre-cooling tissue samples, ensuring safe transport or embedding biological substances, freezing blood and tissue samples, studies in chemistry, physics and materials technology, etc. Dry ice is easy to handle, odourless and flavourless. The SnowPack® dry ice machine can be installed on any commercial CO2-bottle with a standpipe (without pressure regulator) (thread W 21.80 x 1/14" according to DIN 477-1 No. 6).

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

SEAMIAUTOMATIC SEALING DEVICE suitable for the sealing of all sorts of plastic and glass containers. 1. foil application device PolySeal Vario DIS (left hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale foil dispensing with 2 spot pre-sealing removable pre-sealing plates heat protection shield vacuum suction nozzle roller guide with running slide foil magazine for stackable pre-cut sealing lids VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure 2. sealing device PolySeal Vario PN (right hand side) electro-pneumatic stepless pressure regulation stepless manual height adjustment with height scale sealing head heating block, swingable, anodised aluminium hollowed out sealing die heat protection shield container holder VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure

A STANDARD WITH A HIGH LEVEL OF INDIVIDUALISATION You need high performance flushing? And there are fine chips and a high contamination level on your machine? Your standard is the highest surface quality? Then the combiloop CL4G is a must. Based on three sizes of clean liquid tank, it provides high-pressure and bypass or full flow filtration. In addition, thanks to its intelligent modular design, it can be modified to optimal effect to your filtration, flushing, and cooling needs. The combiloop CL4G makes individualisation the standard!

FOR HIGH-PERFORMANCE MACHINING UP TO 27 L/MIN Pure power! Filter finenesses of up to 25 μm and an integrated bypass filtration of the machine tank is no problem thanks to the optional automatic filter. The control pump generates up to 15 °C less heat compared to conventional pumps, and using pressure of up to 300 bar, even smallest bores can be realised.

THE MOBILE HIGH-PRESSURE UNIT – A NEW APPROACH! With the first detachable high-pressure unit in the world, we’re making machining even more sustainably future-proof. A compact unit and installation options allow perfect space utilisation. Proven high-performance technologies in the modular system, such as automatic filter and eco+ regulating pump technology, ensure optimised operating costs and output quality at pressures of up to 300 bar.

FOR CONTINUOUS USE OF UP TO 100 BAR Mobile, compact high-pressure unit with 3-chamber tank system for continuous use of high pressure at machine tools. Well suited for all materials, even for materials producing fine chips like brass and aluminium. Protected function principle of preseparation of dirt in a 3-chamber tank system.

CONTINUOUS USE OF UP TO 100 BAR – UNDER THE BAR FEEDER Thanks to the intelligent arrangement of its components, the combiloop CL2 is a particularly space saving solution that can be fitted under a wide range of bar feeders. The fine filtration inside this visually appealing system is based on protected contaminant pre-separation in the 3-chamber tank with easily accessible, washable wire mesh elements, and pressures up to 100 bar are delivered by a constant pump.

This high-pressure unit proves that high performance and modern design do not have to be expensive. The highest efficiency in the compact class is safeguarded by the new concept with three times the filter surface. Thanks to its perfected measurements, the combiloop CL1 can be fitted under many bar feeders. Also as a mobile unit, it is ideal for changing locations on various machines, e.g. for short runs.

TAILORED POWER COOLING LUBRICANT SYSTEM Your products are characterised by high precision and perfection? Your processes are clocked from beginning to end? Your cooling lubricant system must be perfectly tuned? Offering a flushing capacity of 300 liters a minute, automatic filtration, automated sludge discharge, user configurable pump parameters, high-pressure tool actuation, and optional medium temperature regulation, the combiloop CL5 leaves no wish unfulfilled.

Pressure Regulation Valve DRV Nom.width (mm) Flow rate (l/min) 8 ... 25 930 ... 24.000 adjustment of different pressures

The humidity generators of the HGC series enable the automatic control of relative humidity in the range of 5 % to 90 % in small and medium-sized closed measuring chambers. The humidity generators can be connected to the measuring chambers of many DataPhysics Instruments systems. They can also be combined with laboratory measuring instruments of other manufacturers. The HGC 30 can generate humidity not only by utilising ambient air and the built-in heatable water container, but also via an external gas supply with compressed air, nitrogen, and argon. Variable flow rates between 70 and 3500 ml per minute are possible. The integrated pressure regulator is specially calibrated for nitrogen and argon.

SEAMIAUTOMATIC SEALING DEVICE suitable for the sealing of all sorts of plastic and glass containers. 1. foil application device PolySeal Vario DIS (left hand side) • electro-pneumatic • stepless pressure regulation • stepless manual height adjustment with height scale • foil dispensing with 2 spot pre-sealing • removable pre-sealing plates • heat protection shield • vacuum suction nozzle • roller guide with running slide • foil magazine for stackable pre-cut sealing lids • VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure 2. sealing device PolySeal Vario PN (right hand side) • electro-pneumatic • stepless pressure regulation • stepless manual height adjustment with height scale • sealing head heating block, swingable, anodised aluminium • hollowed out sealing die • heat protection shield • container holder • VARIOTRONIC, control unit for the regulation of temperature, sealing time and pressure

The semiautomatic sealing device PolySeal Vario PN is suited for the sealing of all sorts of plastic and glass containers. • electro-pneumatic • stepless pressure regulation • sealing head heatig block, swingable, anodised aluminium • hollowed out sealing die • heat protection shield • stabiliser • roller guide with running slide • container holder, adjustable container holder optional (see picture) • VARIOTRONIC - regulation of temperature, sealing time and pressure The sealing device is modularly upgradeable to the PolySeal Vario Twin.

"Made in Germany" ABAC HVLP Paint Spraying System SG 2000: Motor Blower ABAC SG 2000, Spray Gun ABAC PN 1A, Air Hose 6 m., Dipper for Viscosity Checks, 2 Spare Intake Filters. Scope of Supply: Adjustable low-pressure motor blower SG 2000 with continuous pressure regulation and 5 m connecting cable. Spray gun PN 1A with intermittent air supply, with 3 nozzles 1 - 1,5 - 2 mm and 0,7 I aluminium paint container. Nozzle spanner. Special air hose 6 m. Dipper for viscosity checks. 2 spare intake filter. Manufacturer: Geheit GmbH (ex CHIRON) Motor power: 1200 Watt Voltage 230 volts or 115V Flow Rate 2800 Litres Per Minute Air Flow Capacity 2.8 Cubic Meters per Minute Maximum Pressure 0.31 Bars Sound Level 81 dB Hose Length 6 Metres Cord Length 5 Metres Spray gun- anodized aluminum 0,7L