Results for
CIC - KLAUS CZERWONKA
Germany
Housing parts made of steel, stainless steel, aluminium, brass. Made of solid material, profile material, cast blanks and pressed parts. With and without surface treatment.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Forged parts made of steel, stainless steel and aluminum including mechanical processing. Pressed brass blanks including mechanical processing, also on rotary transfer machines. Sintered parts made of sintered bronze, sintered porous brass and stainless steel. Filter elements for air, liquids and fuel made of sintered ball material or mesh.
Request for a quotePRESSTECK S.P.A.
Germany
Experts for deep-drawn parts made of stainless steel, aluminium and other non-ferrous metals (including brass, copper and nickel silver).from new development to series production: We develop perfect deep-drawn parts. Pressteck is one of the world's leading specialists for deep drawing individual parts on transfer presses and for their further processing into assemblies. In this non-cutting forming process, we produce hollow parts in several stages from a metal strip that can be made of aluminium, stainless steel, copper or brass, among other materials. Deep drawing has decisive advantages over other processes: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and perfect deep-drawing technology beyond what has been possible so far.
Request for a quotePRESSTECK S.P.A.
Germany
Pressteck is one of the world's leading specialists for deep-drawn individual parts on transfer presses and their processing into assemblies. In this non-cutting tension-pressure process, we produce hollow parts from a metal strip in several stages, which can be aluminium, stainless steel, copper or brass, among others. Compared to other processes, deep drawing has decisive advantages: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and optimise deep drawing technology beyond what is currently possible. We manufacture your individual component from coiled sheet metal and master demanding geometries and high degrees of forming.
Request for a quoteMECHASYS GMBH
Germany
Projects that have already been implemented range from the construction of a "low-cost - high efficiency" laser welding system with CNC axis control focused on customer-specific needs, handling systems, assembly concepts, modular cable shoes, small presses for individual parts (bulk) or continuous goods (stips) for less than 8,000 Euros ... Convince yourself and get back to us! www.mechaSYS.de
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SIMPAC EUROPE GMBH
Germany
C-frame presses are flexible solutions for manual work as well as for automated production processes. The CS is the all-rounder among the C-frame presses, while the ECS is ideal for punching and cutting operations with a higher degree of automation. Overview: ● Press capacity: 350-3,000 kN ● Part size: small ● Slide kincematics: crank ● Application: cutting, stamping, bending, embossing Description and benefits: ● Compact design, no foundation work required, good accessibility for maintenance ● Solid, low-stress annealed press body in monobloc design with minimal frame deflection ● Durable, wear-resistant and very quiet hydraulic clutch ● Casting slide with vibration dampening properties (ECS series) ● 4-fold slide guiding for a high tilting rigidity ● Hydraulic overload protection ● Production time as of 12 weeks
Request for a quoteSIMPAC EUROPE GMBH
Germany
SIMPAC presses with servo direct drive stand for highly dynamic forming processes and offer maximum flexibility in the production. In combination with a high stiffness value of press body and drive, they deliver consistently high part quality. Overview: ● Press capacity: 8,000 - 30,000 kN ● Part size: medium to large ● Slide kinematics: servo (freely programmable) ● Applications: stamping, cutting, bending, embossing, drawing, integration of subsequent processes Features and benefits: ● Dynamic processes thanks to the use of torque motors that deliver high torque even at low speeds ● Maximum production flexibility through free programmability of slide movement, (forming) speed and stroke lenths ● Significantly more output compared to conventionally driven presses due to reversing pendulum movement of the slide ● Very solid, FEM-calculated and low stress annealed press body
Request for a quoteSIMPAC EUROPE GMBH
Germany
Compact presses for a wide range of medium sized parts. Due to its drive-related slide kinematics, the MCL series is particularly suitable for drawn parts. Overview: ● Pressing capacity: 3,000 - 8,000 kN ● Component size: medium ● Slide kinematics: link ● Applications: stamping, drawing, forming Features and benefits: ● The compact design requires little floor space and no foundation at presses below 4,000 kN. ● The very solid, low-stress annealed press bodies are FEM-calculated and optimized by so-called “hot-spot analysis” in areas which are subject to higher loads. ● Motor, clutch/brake unit, lubrication system and control are of German origin and guarantee a long service life and maximum dynamics. ● The slide guiding system ensures a high level of tilting rigidity and reduces the cutting impact during the cut through when it comes to the processing of higher-strength materials.
Request for a quoteSIMPAC EUROPE GMBH
Germany
The Scotch-Yoke drive of the DTL series has a modified link drive characteristic and reduces the slide speed during the forming phase. Thus the presses are not only suitable for cutting, punching and forming tasks, but also for drawing operations. The extra time that the material receives for plastic flow significantly increases the quality of the produced parts. The reduced impact speed of the slide extends the life of the press and the die. Overview: ● Press capacity: 6,000 - 30,000 kN ● Part size: large ● Slide kinematics: link ● Application: as a single press system either as progdie or transfer mode, as well as a press line Description and benefits: ● The outside located pressure points and a long 8-fold slide guiding system well compensate off-center loads, spare press and die and ensure a constant part quality. ● The automatic centralized lubrication system increases pro-ductivity and availability.
Request for a quoteSIMPAC EUROPE GMBH
Germany
SIMPAC presses with servo direct drive stand for highly dynamic forming processes and offer maximum flexibility in the production. In combination with a high stiffness value of press body and drive, they deliver consistently high part quality. Overview: ● Press capacity: 3,000 - 10,000 kN ● Part size: small to medium ● Slide kinematics: servo (freely programmable) ● Application: stamping, cutting, bending, embossing, drawing, integration of subsequent processes Features and benefits: ● Dynamic processes through the use of torque motors that provide high torque even at low speeds ● Maximum production flexibility due to freely programmable slide movement, slide velocity and stroke length ● Significantly higher output compared to conventionally driven presses due to reversing pendulum movement of the slide ● Very solid, FEM-calculated and low stress annealed press body
Request for a quoteSIMPAC EUROPE GMBH
Germany
The eccentric drive of the DTE series is primarily suited for cutting, blanking, forming and embossing operations. Its characteristic sinusoidal slide motion curve makes it ideal for flat and semi-flat parts. The proven and continuously optimized technology ensures reliable production processes. Overview: ● Type: Eccentric presses ● Press capacity: 8,000 - 25,000 kN ● Part size: large ● Slide kinematics: crank / eccentric motion ● Application: as a single press system either as progdie or transfer mode, as well as a press line Features and benefits: ● High part quality due to rigid, FEM-optimized press design ● The outside located pressure points and a long 8-fold slide guiding system absorbe off-center loads, spare press and die and ensure a constant part quality ● Extensive range of optional equipment, such as die cushions, pneumatic ejectors or moving bolsters for a faster die change
Request for a quoteSTRECKFUSS SYSTEMS GMBH & CO. KG
Germany
TYP D 020 Automotive Press for pressing of rivet nuts, connectors, etc. Usage To reline of these connectors Automotive Press was formerly developed. Meanwhile, this device will multiply its application when it comes to press- fit components into the PCB (eg connectors). Also for joining several PCBs or PCB components, the press can be used. Operation Through the use of different tool inserts, which can be easily replaced in the nut tool, different assembly operations can be greatly facilitated, that have often been carried out laboriously on a toggle press. Due to the size of the motor press D 020 can be permanently mounted in the workplace or on a mounting bereitgestelllt car. The operation is simple: the circuit board is inserted with the part to be pressed in the operating range of the device against the stop. Then a limit switch triggers the workflow. By a nearly closed guard is no danger to the operator.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
Toothing is a frequent design element. They are complex in geometry, and their manufacture requires heavy machine use. Previously, toothed parts were mainly manufactured in a cutting process with a finishing process that followed the heat treatment stage. But we produce toothed parts in a cold-form process, thus providing the following benefits: customer-specific external geometries greater endurance strength greater mechanical load resistance press-smooth surfaces high accuracy of shape and position saving on materials
Request for a quoteResults for
Press parts - Import exportNumber of results
14 ProductsCompany type