Power transmission - Import export

Keiper’s high-performance FLEXA flat belts are made of fully synthetic polyamide or polyester fabric and polyamide foil, with or without a suitable adhesion coating made of nitrile-butadiene rubber, depending on the wide range of possible power transmission and conveying applications. Fitted with a polyamide or polyester reinforcement With a one-sided or two-sided coating of nitrile-butadiene rubber, highly resistant to abrasion and wear Different surface structures FLEXA belts can be used as: Power transmission belts Folder-gluer belts Machine belts Tangential belts Spindle belts Properties + Suitable for a large temperature range + High resistance to abrasion + Very good dynamic properties + Resistant to oils and acids + Outstanding anti-static properties of black NBR - Gets brittle when exposed to UV light and ozone (only for limited outside use) - Processing is work and energy intensive (vulcanization, hardening)

Round hook belts are the ideal solution for power transmission or conveying systems where several belts run on one shaft. Since they are easy to install, downtimes and maintenance costs can be reduced significantly. The hook belts only have to be inserted. Then the belt is joined to the hook and the second side of the hook is closed with pliers. Thus, there is no time-consuming and cost-intensive assembly work.

KEIPER has an extensive range of flat belts, including high-performance flat belts, power transmission belts, folder-gluer belts, machine belts, tangential belts and conveying belts. For the perfect power transmission, conveying or control solution in any industrial sector. Keiper flat belts are designed to meet your specific requirements and applications, and, accordingly, they are made to size. Our flat belts are made of different traction layers and composite structures with different coatings such as nitrile-butadiene rubber, leather and surface structures. FLEXA With a polyamide or polyester reinforcement With a one-sided or two-sided coating of nitrile-butadiene rubber, highly resistant to abrasion and wear Different surface structures CROMA With a polyamide reinforcement With a one-sided or two-sided coating of chrome-split leather, highly resistant to abrasion and wear Butt leather belts Made of pure prestretched butt leather Rubber-and-fabric belts

Keiper CROMA high-performance flat belts are made of fully synthetic polyamide foils, with a one-sided or two-sided adhesion coating of chrome-split leather. Fitted with a polyamide reinforcement. With a one-sided or two-sided coating of chrome-split leather, highly resistant to abrasion and wear. Chrome-split leather is used exclusively as a friction coating on power transmission belts as an alternative to nitrile-butadiene rubber (NBR). CROMA belts with a coating of chrome-split leather are perfect for power transmission applications where the rollers are considerably contaminated by oil and dirt. In view of its slightly porous surface, chrome-split leather is air and humidity permeable and absorbs moisture; thus, it retains friction. However, the coefficient of friction of leather is lower than that for nitrile-butadiene rubber and steadily decreases during operation.

We have a complete range of polyurethane round belts for conveying and power transmission applications. PU round belts, extruded in open lengths, are homogeneous round profiles that can be welded for use as high-quality power transmission and conveying elements. Our stock mainly comprises solid profiles with a smooth or slightly roughened surface and hollow profiles for nipple connections. Several types have FDA/USDA approval and comply with EU Directive 2007/19/EC. Although we generally produce in open lengths, we can also produce all belts according to your specifications. Our round belts convey a wide range of products such as foodstuffs, glass, roof tiles, PC boards and many more. The standard range of round belts is rounded off with aramid, polyester or glass-fiber reinforcements. If an appropriate quantity is purchased, we also produce special types with PES or aramid reinforcements.

PU timing belts with easy joint as strong as a welded joint The easy joint timing belt fastener is the perfect solution, for a quick and easy mechanical endless connection of PU timing belts. Assemble without disassembling, without stopping your production line Replace your belts in few minutes without disassemble your hoods, pulleys, axis. Reduce your production downtimes. The method of mechanical assembly and fastening system easy joint offers unique solutions for easy and fast repairs of power transmission belts or conveyor belts. Pitches: H / T10 / AT10 / T20 / AT20 / 8M / 14M Standard: Polyurethane 90° Shore A grey Versions: Standard, PAZ, PAR Cords: reinforced with a Polymercord around the Pin in each tooth joint, arranged in parallel Width: from 10 to 150mm, (wide belts possible on request)

Dynamic Spur Gearboxes MS-Graessner produces customer-specific spur gearboxes of a helical or straight-toothed design. The design of the toothing is carried out using KISSsoft and our own design and calculation programs. In addition to the provision of technical support and advice to our customers, we also take over the entire engineering process. By working closely together with our customers, we guarantee the development and production of the optimum drive solution in each case. Advantages: economical production simple mechanical movement and power transmission high level of efficiency high running smoothness high axial and radial loads low circumferential backlash broad range of applications long service life

The Planetary Gearbox for Power and Precision Full power with the highest levels of precision. The PlanetGear has the necessary power reserves available for the most challenging power transmission requirements. Advantages: compact design high level of efficiency high torsional rigidity low mass moment of inertia torque high overload capacity high dynamics large transmission ratios MS-Graessner offers innovative, customised gearbox solutions in a helical or straight-toothed design. The design of the toothing is carried out using KISSsoft and our own design and calculation programs. In addition to the provision of technical support and advice to our customers, we also take over the entire engineering process. By working closely together with our customers, we guarantee the development and production of the optimum drive solution in each case.

Keiper PU Flex timing belts are extruded of abrasion-resistant polyurethane and high-strength steel cords, aramid cords or high flexible steel cords and VA steel with endless winded cords. In these belts the cords are helically spooled. These timing belts can be used for all kinds of power transmission applications because of their high power transfer, and their high flexibility make them suitable for synchronous transport and positioning applications. By using standard polyurethane and such other belt materials as polyurethane that is cold resistant, heat resistant or suitable for contact with foodstuffs a wide spectrum of applications is possible.

Endless extruded round belts Our endless extruded round belts are ideal for low power requirements. They are elastic power transmission elements that do not need cost-intensive tensioning devices. In view of the special production process, they do not have any welding seams or terminal connections and run very smoothly. Moreover, they allow a minimum pulley diameter starting from 5.5 x belt diameter. Our types E80, V75, C70 and P82 are made of specially selected and dynamically tough materials. In addition, type E80 also is antistatic to a limited extent and has a resistance value of about 106 Ohm; thus, it is excellent for use in electronic devices and chip production. Available diameters: 1.8mm - 7mm Available lengths: 40mm – 1,610mm Temperature resistance: -20°C - +160°C Coefficient of friction: 0.35µ - 0.9µ* Maximum tension: >100N

Bourdon takes mechanical pressure monitoring into the digital age This innovative device fits to any comprehensive platform for machine and process monitoring as well as the preventive maintenance of equipment which is supported by a LoRa wireless protocol. Key applications include pressure measurement and monitoring for oil refineries, petrochemical industry and biodiesel plants. More predestined applications are in waste and water treatment, power generation and transmission, general process industry, building services and civil engineering. The right choice when industry grade wireless pressure measurement and monitoring is required

etaTRAY is a Plug-and-Play forklift battery as a retrofit for your industrial truck. Available for all standard industrial truck battery trays with battery capacities of 100–240 Ah. No matter if a 12V, 24V or even a 48V batteries. Old industrial trucks still have a lot of life left in them. Instead of throwing them on the scrap heap, you can replace their standard lead-acid battery (PzS) trays with our Li-Ion etaSTORE battery pack in just a few steps. This retrofitting solution combines inductive power transmission, intelligent wireless charging technology and lithium-ion batteries to make old vehicles fit for the future

You are short of personnel, but have to process your orders, preferably 24/7? Then the DockLock AC zero-point clamping system for automated fixture change-over, in either the hydraulic or pneumatic version, is perfect for you. The clamping device quick change-over system for stationary applications allows automated change-over of your clamping devices in two minutes. And with repeatability of ≤ 0.005 mm, without alignment. The design of the form fit clamping and power transmission is identical to the DockLock for manual set-up. In addition, it is equipped with a closure at the clamping position as protection against contamination and chips. That ensures even less wear and reduces maintenance expenses. In addition, standard features include an air sensing control, air-blast support isles and a piston position control for a safe and reliable automated process.