Portable power - Import export

foot switch dynamic SEFD 50 foot-operated start Switch ***SE 50 Silent Grinder *** The new micro grinder with electric mickro-motor from BIAX - lightweight, low Vibration, extremly low noise!

Hand piece ESS 3-50 (Slim) ***SE 50 Silent Grinder *** The new micro grinder with electric mickro-motor from BIAX - lightweight, low Vibration, extremly low noise! Technical data of hand Piece: Diameter: max. Ø 29 mm Length: 162 mm Weight without cable: 240 gr Run-out accuracy: < 0,02 mm Collets diameter: 3,0 mm (standard) / 2,35 mm (optional) Tool changing: Quick clamping Cooling: Enclosed (all models) Drive system: Brushless DC motor (all models) Technical Data: Speed range: 1.000 - 50.000 rpm Operating Voltage: 100 - 240 Volts Rated frequency: 50/60 Hz Power: 150 Watts Overload protection: Eliminates waiting time when switching back on Direction of Rotation: Switch between clockwise and anti-clockwise rotation

Hand piece ESB 3-50 (Basic) ***SE 50 Silent Grinder *** The new micro grinder with electric mickro-motor from BIAX - lightweight, low Vibration, extremly low noise! Technical data of hand Piece: Diameter: max. Ø 30 mm Length: 165 mm Weight without cable: 240 gr Run-out accuracy: < 0,02 mm Collets diameter: 3,0 mm (standard) / 2,35 mm (optional) Tool changing: Quick clamping Cooling: Enclosed (all models) Drive system: Brushless DC motor (all models) Technical Data: Speed range: 1.000 - 50.000 rpm Operating Voltage: 100 - 240 Volts Rated frequency: 50/60 Hz Power: 150 Watts Overload protection: Eliminates waiting time when switching back on Direction of Rotation: Switch between clockwise and anti-clockwise rotation

For universal outdoor use and permanent use on sites, IP 44. Robust, plastic-coated steel-tube frame for steady position and additional protection for housing. With an ergonomic carrying handle for comfortable carrying. Oil resistant rubber cable for permanent outside use. With RCD circuit breaker 30 mA for extra safety. Earthed sockets in pairs with different phases. Protective cover for fuses, lockable. Cable length: 2 m Cable: H07RN-F 5G4,0 Plug: CEE 400 V/32 A, 5-pin Socket: 1 x CEE 400 V/32 A, 2 x CEE 400 V/16 A, 4 x 230 V/16 A Protection: 1 x FI 40 A 4-pin, 30 mA 1 x LS 400 V/16 A 2 x LS 230 V/16 A Plug-in system: DE

The EMA 84 is a portable, battery-powered digital pressure gauge providing highly accurate measurements of positive and negative differential pressures. Because it is durable and easy-to-use, the EMA 84 lends itself well to maintenance work and customer service applications for heating, air-conditioning and ventilation units, where it can be used for monitoring filters, measuring fireplace drafts, etc. Its precision and reproducibility also make the EMA 84 is highly suitable for use in laboratory applications.

The EMA 200 is a portable, battery-powered digital pressure gauge for precise measurement of positive and negative differential pressures. Because it is easy-to-use, the EMA 200 lends itself well to maintenance work and customer service applications for heating, air-conditioning and ventilation units, where it can be used for monitoring filters and measuring fireplace drafts as well as measuring flow rates and determining volumetric flows. The instrument is available with an ISO factory calibration or DAkkS calibration certificate.

Precision Known for their performance, dependability and versatility, the Dotco brand is viewed as the premier line of surface-preparation tools in the industrial marketplace. With the lowest runout in the market, precision parts let the operators manufacture precision products. Ergonomics Dotco tools are designed so that their form follows their function. Simply put, these are tools that are more comfortable for the operator to use, and work with operators - not against them. Versatility By using only a few motor types, a diverse line of Dotco products have been developed to handle a wide range of applications. These tools also have a high interchangeability of parts making maintenance easier and more affordable.

The SMA 30-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 8 mm is possible in NE metals and a chamfer width of up to 6mm in steel. In addition to this, a radius processing of 1.2mm to 6mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 30 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles 30°, 45° and 60°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The SMA 20-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 7 mm is possible in NE metals and a chamfer width of up to 4mm in steel. In addition to this, a radius processing of 1.2mm and 2.5mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The processing of drill holes is already possible starting at a diameter of >20mm.

The ASO 313 is for the chamfering and rounding off of workpieces with straight edges. The edge break with R2 - R4 is only possible by replacing the turning plate. A secure and simple handling is possible through the prismatic guide and additional handle. This helps us achieve a particularly clean and vibration-free chamfer quality. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer angle can be gradually set between 15 - 45°. Advantages: For 15 - 45° chamfers and for rounding edges Secure handling through prismatic guide and handle Reliable electric motor Insert milling cutter for efficient chamfering

The ASO 312 is for the chamfering and rounding off of workpieces with straight edges. The edge break with R2 - R4 is only possible by replacing the turning plate. A secure and simple handling is possible through the prismatic guide and additional handle. This helps us achieve a particularly clean and vibration-free chamfer quality. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer angle can be gradually set between 15 - 45°.

The ASO 310 is used for deburring and rounding off edges on workpieces made of steel, stainless steel, aluminum and other materials. With the standard ball bearing, it is suitable for processing drill holes and openings starting with an internal diameter of 12 mm and a sheet thickness >8mm. With the optionally available stop collar for thin sheets, drill holes and internal diameters starting at 14 mm and a sheet thickness of >2mm can be processed. The edge break with R1 or R2 is only possible in combination with the stop collar for thin sheets. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer size can be set through the rotary plate.

The ASO 300 is used for deburring and rounding off edges on workpieces made of steel, stainless steel, aluminum and other materials. It is suitable for processing drill holes and openings starting with an internal diameter of 7.0 mm. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer size can be set precisely through a scale. Advantages: For 45° chamfers and for rounding edges Bores starting at Ø = 7 mm can be processed Can be used for straight edged and contours Reliable compressed air motor Compact and light (500g) construction Insert milling cutter for efficient chamfering One-handed operation Safety lever valve

It is the perfect battery-operated tool for deburring, separating, grinding and polishing. Due to its unrestricted mobility, the MT-A enables continuously fatigue-free and efficient work. In addition, its precise and powerful motor makes it easy to process any material. Almost all fields of application are covered.

With its placement prism on wheels, the ASO 760 is ideal for welded seam preparation for straight and large workpieces. Different welding chamfers can be produced through the angle setting from 0 - 60°. The two-disc chamfer with the wonderful and patented 8 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 18mm is possible here. Round materials or tubes starting with an external diameter of 150mm can be chamfered through an optionally available pipe chamfering device. Advantages: Processing chamfers on sheet metal, containers, outer edges Angle adjustment from 0 - 60° Up to 8-times usable turning cutting plates Sturdy and durable machine Good guide through two-hand operation Optional chamfering device starting at Ø150mm Controlled flying chips

The SMA 60 is available in an electrical, compressed-air or high-frequency design. The machine is designed for handling steel, aluminum, copper and plastics. In NE metals and steel up with a tensile strength of 600N/mm², a chamfer width of up to 30mm is possible. In addition to this, a radius processing of 1.2mm to 15mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. Advantages: Booster technology for a higher material removal rate Spring technology for higher service life of cutting inserts Processing chamfers, radii on sheets, containers, inner and outer edges, contours and drill holes Replaceable cutter head for different chamfer angles 0 - 80° Easy and vibration-free work

The SMA 50-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 20 mm is possible in NE metals and a chamfer width of up to 15mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm.