Results for
Germany
High resolution, magnetic scanning, sturdy plastic housing in especially flat design - for applications with restricted space conditions, e.g., in drive technology or medical technology. Installation depth 25 mm. Resolutions of max. 2000 pulses/revolution. Through hollow shafts up to max. ø14 mm with plain or ball bearing. IP50 protection category (plain bearing), IP63 (ball bearing). Housing made of reinforced plastic.
Request for a quoteGermany
Displacement sensors models 8710 and 8711 with resistance tracks made of conductive plastic material are designed for a direct and accurate measuring of mechanical displacements. A special ball joint coupling is mountable on both ends of the driving rod. Because of this the sensor may be used free of clearance or lateral forces also with angular or parallel misalignment between sensor and measuring device. A special multi-fingered slider provides a good electrical contact also at high adjustment speeds or vibrations. Areas of application are: —Electromagnets —Switch and button deflections —Pneumatic cylinders —Press-fits (longitudinal press-fits) —Hydraulic cylinders —Measurements of deformation and bending —Length tolerances —Feeding paths Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system.
Request for a quoteGermany
The GEMÜ 0326 directly controlled 3/2-way pilot solenoid valve is designed for mounting to a compact aluminium rail as a valve battery for mounting in control cabinets or as a valve manifold near the pneumatic components to be controlled. The body is made of plastic. The coil is plastic encapsulated. -Robust design -Coil easy to replace -Option: integrated LED (M12 version) -Modular battery mounting
Request for a quoteGermany
The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. A stainless steel bellows and a handwheel extension are available as options (not for operator size 0). —Various valve body connections (threaded sockets, threaded spigots, butt weld spigots) available —High flow rates due to angle seat design —Optionally for contact with foodstuffs as per directive (EC) No. 1935/20041 (K-no. 1935)
Request for a quoteGermany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteGermany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteGermany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteGermany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteGermany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteGermany
Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort Available with NV(No Vacuum), CV (Central Vacuum) or SV (Self Vacuum) Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts.
Request for a quoteGermany
Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort For Self Vacuum & Central Vacuum Available with NV(No Vacuum), CV (Central Vacuum) or SV (Self Vacuum) Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts
Request for a quoteGermany
Series V 600 - 1100 IS The HEINKEL Vertical De-oiling Centrifuge V 600 – 1100 IS is designed and built for the separation of cutting fluids and coolants from steel, cast and metal chips. Special properties for the customer’s benefit: Recovery of liquids and oil from chips produced by processing centres and from plastic pellets Simple and rugged design
Request for a quoteGermany
The HIT series offers pendulum impact testers for plastics. They are specifically designed for manufacturing and processing plastics. Designed with an accurate and reliable structure, these instruments are configured in the right range according to standards of use. They make use of carbon double rods for the pendulum and are capable of providing maximum stiffness in the impact direction. These pendulum impact testers deliver optimum concentration of masses at a specific point of impact. A single pendulum is integrated with a fast-change device therefor allowing faster, zero-tool pendulum changes. The HIT series are characterized by their easy to operate system and ergonomically built controls. Typical tests: - Charpy tests: ISO 179, ASTM D6110 - Izod tests: ISO 180, ASTM D256, ASTM D4812 - Impact tensile tests: ISO 8256 Methods A and B, ASTM D1822 - Dynstat bending and impact tests: DIN 53435
Request for a quoteResults for
Plastics design - Import exportNumber of results
15 ProductsCompany type