Piping systems - Import export

Pipe bracket with rubber inlay

Pump F 430 PP 100/50 in polypropylene was designed for higher delivery pressure. Instead of a rotor, it is equipped with an impeller in a pump housing. In connection with the powerful FLUX motors the pump delivers a far higher pressure of over 3 bar compared to pumps with semi-axial rotors. This makes it especially convenient for conveying media out of e.g. IBCs and other containers into higher lying pipe systems or out of an IBC in the basement to a higher floor. Benefits: - The pump has a significantly higher delivery head in the range up to 40 l/min compared to pumps with half-axial rotor (Z-rotor) - Allows the conveying of media out of an IBC stock in the basement into higher floors - Ideal for pumping media into a higher lying pipe system - Can be used as a supply pump of line networks e.g. for feeding of process water

The pressure relief valves GEMÜ N085 and N185 protect the plant and the piping system against gauge pressure and reduces pressure peaks. The third pipe spigot enables the valve to be installed in the main pipe. If the pressure increases, the spring is raised and the valve opens. The pressure is reduced to the preset value and can escape via the third pipe spigot into an adjacent pipe. If the pressure falls, the spring force presses the diaphragm in the direction of the seal seat and it is closed. The spring force can be adjusted as required using a set screw. - Valve adjustments can also be made under working pressure. - The optimization of piston, springs and control face ensures good control characteristics - The actuator is hermetically separated from the medium

The AquaZero cooling machines, equipped with a water tank and centrifugal pump, are designed for an open cooling circuit system. Excellent reliability, durability, compact design. Example: Our AquaZero 4.0 kW cooling unit impresses with its high performance, temperature controls environmentally friendly and works efficiently. Choose this water chiller if you want to control temperatures in your production rooms, lounges or storage rooms to the degree. The water-cooled cooling devices from AquaZero are made in Germany and can be connected to any existing pipe system. Equipped with a 28 liter water tank and centrifugal pump, you can start with the desired temperature control of your premises in the company immediately after installation.

clamp "worm drive" - steel (galvanised) Ø (mm) width SCH.SCHNE.012.020.12.VZ 12 - 20 12 SCH.SCHNE.020.032.05.VZ 20 - 32 5 SCH.SCHNE.032.045.05.VZ 32 - 45 5 SCH.SCHNE.040.060.12.VZ 40 - 60 12 SCH.SCHNE.060.080.12.VZ 60 - 80 12 SCH.SCHNE.070.090.12.VZ 70 - 90 12 SCH.SCHNE.090.110.12.VZ 90 - 110 12 SCH.SCHNE.142.177.20.VZ 142 - 177 20 SCH.SCHNE.150.170.12.VZ 150 - 170 12 SCH.SCHNE.192.227.20.VZ 192 - 227 20 SCH.SCHNE.217.252.20.VZ 217 - 252 20 SCH.SCHNE.242.277.20.VZ 242 - 277 20 SCH.SCHNE.292.327.20.VZ 292 - 327 20 clamp "hinge bolt" - steel (galvanised) / stainless steel Ø (mm) width SCH.GELENK.036.039.20.VZ 36 - 39 20 SCH.GELENK.040.043.20.VZ 40 - 43 20 SCH.GELENK.044.047.22.VZ 44 - 47 22 SCH.GELENK.048.051.22.VZ 48 - 51 22 SCH.GELENK.052.055.22.VZ 52 - 55 22 SCH.GELENK.056.059.22.VZ 56 - 59 22 SCH.GELENK.060.063.22.VZ 60 - 63 22 SCH.GELENK.064.067.22.VZ 64 - 67 22 SCH.GELENK.068.073.24.VZ 68 - 73 24 SCH.GELENK.074.079.24.VZ 74 - 79 24 SCH.GELENK.080.085.24.VZ 80 - 85...

SCH-01 (PVC) - outside material PVC - inside material PCV - with earthing wire - 20 m - rolls Ø (mm) °C SCH.01.PVC.038 38 -20° / +65° SCH.01.PVC.040 40 -20° / +65° SCH.01.PVC.045 45 -20° / +65° SCH.01.PVC.050 50 -20° / +65° SCH.01.PVC.060 60 -20° / +65° SCH.01.PCV.076 76 -20° / +65° SCH-01 (PVC/PUR) - outside material PVC - inside material PUR (1.4 mm) - with grounding - 20 m - rolls Ø (mm) °C SCH.01.PVC.PUR.06.040 40 -20° / +80° SCH.01.PVC.PUR.06.050 50 -20° / +80° SCH.01.PVC.PUR.06.060 60 -20° / +80° SCH-02 (PUR) - outside material PVC - inside material PUR (1.4 mm) - with earthing wire - 20 m - rolls Ø (mm) mm °C SCH.02.PUR.14.032 32 1.4 -40° / +100° SCH.02.PUR.14.038 38 1.4 -40° / +100° SCH.02.PUR.14.040 40 1.4 -40° / +100° SCH.02.PUR.20.040 40 2.0 -40° / +100° SCH.02.PUR.14.045 45 1.4 -40° / +100° SCH.02.PUR.20.045 45 2.0 -40° / +100° SCH.02.PUR.14.050 50 1.4 -40° / +100° SCH.02.PUR.20.050 50 2.0 -40° / +100° SCH.02.PUR.14.054 54 1.4 -40° / +100° SCH.02.PUR.14.060 60...

coupling - with gasket thread size KP.STORZ.FEST.A.40.01.AL 4" Storz-A (133) KP.STORZ.FEST.B.30.01.AL 3" Storz-B (89) KP.STORZ.FEST.C.20.01.AL 2" Storz-C (66) KP.STORZ.FEST.C.25.01.AL 2.5" Storz-C (66) hose coupling - aluminium coupling - with gasket for hose Ø size KP.STORZ.SCH.A.090.01.AL 90 Storz-A (133) KP.STORZ.SCH.A.102.01.AL 102 Storz-A (133) KP.STORZ.SCH.B.076.01.AL 76 Storz-B (89) KP.STORZ.SCH.B.080.01.AL 80 Storz-B (89) KP.STORZ.SCH.C.050.01.AL 50 Storz-C (66) cap - with mounting chain size KP.STORZ.BLIND.A.01.AL Storz-A (133) KP.STORZ.BLIND.B.01.AL Storz-B (89) KP.STORZ.BLIND.C.01.AL Storz-C (66) coupling incl. limit switch - aluminium coupling - with cap and mounting chain - limit switch (10 m cable) thread size KP.STORZ.OROHR.A.40.02.AL 4" Storz-A (133) KP.STORZ.OROHR.B.30.02.AL 3" Storz-B (89) coupling (with pipe) - aluminium coupling - stainless steel pipe pipe Ø pipe length size KP.STORZ.MROHR.A.40.089.01.AL 88.9 500 Storz-A...

male part (A) - made of aluminium - with gasket Ø KP.CAM.A.01.40.AL 40 KP.CAM.A.01.45.AL 45 KP.CAM.A.01.50.AL 50 KP.CAM.A.01.60.AL 60 KP.CAM.A.01.65.AL 65 KP.CAM.A.01.76.AL 76 cap (DC) - made of aluminium - with mounting chain - with gasket Ø KP.CAM.DC.01.40.AL 40 KP.CAM.DC.01.45.50.AL 45 KP.CAM.DC.01.45.50.AL 50 KP.CAM.DC.01.60.65.AL 60 KP.CAM.DC.01.60.65.AL 65 KP.CAM.DC.01.76.AL 76 plug (DP) - made of aluminium - with mounting chain Ø KP.CAM.DP.01.40.AL 40 KP.CAM.DP.01.45.50.AL 45 KP.CAM.DP.01.45.50.AL 50 KP.CAM.DP.01.60.65.AL 60 KP.CAM.DP.01.60.65.AL 65 KP.CAM.DP.01.76.AL 76 female part (C) - with gasket - material touching parts stainless steel Ø KP.CAM.C.02.38.CR 38 KP.CAM.C.02.40.CR 40 KP.CAM.C.02.45.CR 44.5 KP.CAM.C.02.50.CR 50 KP.CAM.C.02.54.CR 54 KP.CAM.C.02.60.CR 60.3 KP.CAM.C.02.65.CR 65 KP.CAM.C.02.70.CR 70 KP.CAM.C.02.76.CR 76 female part (D) - made of aluminium - with gasket Ø KP.CAM.D.01.40.AL 40 KP.CAM.D.01.50.AL 50 KP.CAM.D.01.60.AL 60 KP.CAM.D.01.76.AL...

RV.10 - light version - length = 100 mm, 2 screws - sleeve (NBR or silicone) - stainless steel sleeve Ø (mm) gasket max. C° RV.10.038.100.2.01.CR 38 NBR black 80 RV.10.038.100.2.02.CR 38 NBR white 110 RV.10.038.100.2.03.CR 38 silicone red 225 RV.10.040.100.2.01.CR 40 NBR black 80 RV.10.040.100.2.02.CR 40 NBR white 110 RV.10.040.100.2.03.CR 40 silicone red 225 RV.10.045.100.2.01.CR 45 NBR black 80 RV.10.048.100.2.01.CR 48 NBR black 80 RV.10.050.100.2.01.CR 50 NBR black 80 RV.10.050.100.2.02.CR 50 NBR white 110 RV.10.050.100.2.03.CR 50 silicone red 225 RV.10.054.100.2.01.CR 54 NBR black 80 RV.10.060.100.2.01.CR 60 NBR black 80 RV.10.060.100.2.02.CR 60 NBR white 110 RV.10.060.100.2.03.CR 60 silicone red 225 RV.10.063.100.2.01.CR 63.5 NBR black 80 RV.10.065.100.2.01.CR 65 NBR black 80 RV.10.065.100.2.02.CR 65 NBR white 110 RV.10.070.100.2.01.CR 70 NBR black 80 RV.10.070.100.2.03.CR 70 silicone red 225 RV.10.076.100.2.01.CR 76 NBR black 80 RV.10.080.100.2.01.CR 80 NBR black...

branch pieces 45° - borosilicate glass 3.3 - ends fire-polished - with copper strip Ø1 (mm) Ø2 (mm) L1 (mm) L2 (mm) FS.45.044.32.044.32.GL 44 44 250 160 FS.45.054.35.054.35.GL 54 54 250 160 FS.45.065.42.065.42.GL 65 65 250 160 L-pieces - borosilicate glass 3.3 - ends fire-polished - with copper strip Ø (mm) R RB.044.32.0090.90.100.100.GL 44 90 RB.054.35.0090.90.100.100.GL 54 90 RB.065.42.0090.90.100.100.GL 65 90 T-pieces (one side closed) - borosilicate glass 3.3 - ends fire-polished - with copper strip Ø1 (mm) Ø2 (mm) L1 (mm) L2 (mm) FS.TC.044.32.044.32.GL 44 44 210 155 FS.TC.048.32.048.32.GL 48 48 210 155 FS.TC.054.35.054.35.GL 54 54 210 155 FS.TC.065.42.065.42.GL 65 65 210 155

Description - borosilicate glass 3.3 - ends fire-polished - with copper strip bends (glass).pdf

suction tube (single-walled) - stainless steel article number Ø L SGL.1A.030.0800.CR 30 820 SGL.1A.038.0300.CR 38 300 SGL.1A.038.0500.CR 38 530 SGL.1A.038.0800.CR 38 820 SGL.1A.040.0300.CR 40 300 SGL.1A.040.0500.CR 40 530 SGL.1A.040.0800.CR 40 820 SGL.1A.045.0300.CR 45 300 SGL.1A.045.0500.CR 45 530 SGL.1A.045.0800.CR 45 820 SGL.1A.050.0300.CR 50 300 SGL.1A.050.0500.CR 50 530 SGL.1A.050.0800.CR 50 820 SGL.1A.060.0300.CR 60 300 SGL.1A.060.0800.CR 60 820 suction tube (double-walled) - stainless steel article number Ø L SGL.2A.038.1000.CR 38 1000 SGL.2A.040.1000.CR 40 1000 SGL.2A.045.1000.CR 45 1000 SGL.2A.050.1000.CR 50 1000 SGL.2A.060.1000.CR 60 1000 SGL.2A.065.1000.CR 65 1000 SGL.2A.070.1000.CR 70 1000 SGL.2A.076.1000.CR 76 1000 suction tube w. filter (double-walled) - stainless steel article number Ø L SGL.2F.040.1000.CR 40 1000 SGL.2F.050.1000.CR 50 1000 SGL.2F.060.1000.CR 60 1000

Description - stainless steel - ends cleanly deburred Ø1 (mm) Ø2 (mm) L (mm) FS.RED.038.040.CR 38 40 150 FS.RED.038.045.CR 38 45 150 FS.RED.038.050.CR 38 50 150 FS.RED.038.054.CR 38 54 150 FS.RED.040.045.CR 40 45 150 FS.RED.040.050.CR 40 50 150 FS.RED.040.054.CR 40 54 150 FS.RED.040.060.CR 40 60.3 150 FS.RED.045.050.CR 44.5 50 150 FS.RED.045.054.CR 44.5 54 150 FS.RED.045.060.CR 44.5 60.3 150 FS.RED.050.054.CR 50 54 150 FS.RED.050.060.CR 50 60.3 150 FS.RED.050.063.CR 50 63.5 150 FS.RED.050.065.CR 50 65 150 FS.RED.050.070.CR 50 70 150 FS.RED.054.060.CR 54 60 150 FS.RED.054.070.CR 54 70 150 FS.RED.060.063.CR 60.3 63.5 150 FS.RED.060.065.CR 60.3 65 150 FS.RED.060.070.CR 60.3 70 200 FS.RED.060.076.CR 60.3 76.1 200 FS.RED.060.080.CR 60.3 80 200 FS.RED.063.076.CR 63.5 76.1 200 FS.RED.065.070.CR 65 70 200 FS.RED.065.076.CR 65 76.1 200 FS.RED.065.080.CR 65 80 200 FS.RED.065.084.CR 65 84 200 FS.RED.070.076.CR 70 76.1 200 FS.RED.070.080.CR 70 80 200 FS.RED.070.084.CR 70 84...

30° (stainless steel hardened) - stainless steel (hardened) - shot-blasted (steel balls) Ø1 (mm) Ø2 (mm) L1 (mm) L2 (mm) FS.30.040.15.040.15.CR.H 40 40 300 200 FS.30.050.15.050.15.CR.H 50 50 300 200 FS.30.060.15.060.15.CR.H 60.3 60.3 300 200 45° (stainless steel hardened) - stainless steel (hardened) - shot-blasted (steel balls) Ø1 (mm) Ø2 (mm) L1 (mm) L2 (mm) FS.45.040.15.040.15.CR.H 40 40 250 160 FS.45.050.15.050.15.CR.H 50 50 250 160 FS.45.060.15.060.15.CR.H 60.3 60.3 250 160

30° - stainless steel - shot-blasted (steel balls) Ø1 (mm) Ø2 (mm) L1 (mm) L2 (mm) FS.30.038.15.038.15.CR 38 38 300 200 FS.30.040.15.040.15.CR 40 40 300 200 FS.30.045.15.045.15.CR 44.5 44.5 300 200 FS.30.050.15.050.15.CR 50 50 300 200 FS.30.060.15.045.15.CR 60.3 44.5 300 200 FS.30.060.15.050.15.CR 60.3 50 300 200 FS.30.060.15.060.15.CR 60.3 60.3 300 200 FS.30.065.15.065.15.CR 65 65 400 300 FS.30.070.20.050.20.CR 70 50 400 300 FS.30.070.20.070.20.CR 70 70 400 300 FS.30.076.20.076.20.CR 76.1 76.1 400 300 FS.30.080.20.080.20.CR 80 80 400 300 FS.30.084.20.084.20.CR 84 84 400 300 FS.30.089.20.089.20.CR 88.9 88.9 450 350 FS.30.100.15.100.15.CR 100 100 450 350 FS.30.102.20.102.20.CR 101.6 101.6 450 350 FS.30.104.20.104.20.CR 104 104 450 350 FS.30.108.20.108.20.CR 108 108 450 350 FS.30.114.20.114.20.CR 114.3 114.3 450 350 FS.30.129.20.129.20.CR 129 129 450 350 FS.30.154.20.154.20.CR 154 154 640 490 45° - stainless steel - shot-blasted (steel balls) Ø1 (mm) Ø2 (mm) L1 (mm) L2...

Description - crease-free bended - ends cleanly deburred bends (stainless steel).pdf