Painting - Import export

Our in-house paint shop offers many advantages to our customers. Desired colors can be applied quickly and thus we can offer a high degree of flexibility.

paint supply units for rolling and spray lacquer in the external decoration

YOU TAKE CARE OF THE COLOR, WE TAKE CARE OF THE QUALITY For paint tests, we are able to produce paint test panels that are made of various materials, offering a wide range of coatings, shapes and surface finish options. Of course we attach great importance to meeting your requirements. Upon request, we supply bright-finish, degreased or pre-treated panels. Moreover, test panels can be provided with drilled holes or rounded corners. You can also order test specimens made of any common materials such as wood, glass, aluminum, steel or plastic for the TABER abraser test. From various metals From various plastics With boreholes Bare or pretreated Degreased and vacuum-packed Various sizes upon request Coil-coated aluminum or sheet steel upon request

high performance coating of sophisticated parts

"The only bristled drive board. – suitable for all pads on the market – Outstanding colour marking for clear identification as drive board – special inclined position of the filaments for optimal fixture and drive of the pads – when using cro-connect with integrated cro-lock there is a safe hold of the pads when lifting the brush unit Pad operating widths: 12"" - 22"""" Fill type: PP 100 Water hole: with / without"

"The velcro drive board for perfect connection with demanding pad backs. – perfect hold of velour backs and the softest pads – dampening effect for a smooth machine run – equals uneven ground surfaces – when using cro-connect with integrated cro-lock it provides a perfect hold of the pads even when lifting the brush unit Pad operating widths: 16"" - 18"""" Water hole: with / without Including matching cro-connect"

"The classical drive board with high-quality plastic barbed hooks. – suitable for all pads on the market – perfect hold and gentle treatment of the cleaning pad – innovative geometry of the plastic barbed hooks – resistant to chemicals of all common cleaning agents – almost unlimited life through unique plastic formulations – with cro-connect and integrated cro-lock safe hold of the pads when lifting the brush unit Pad operating widths: 12"" - 22"""" Water hole: with / without Including matching cro-connect"

"For wet scrubbing of medium hard to firm floor coverings (also for structured and uneven surfaces). – requires up to 25% less water – consumes noticeably less detergent – reduces time-consuming refilling and emptying of the water tank – cleans more area in less time – saves labor costs operating widths: 16"" - 18"""" Fill type: PP 070 Water hole: with / without"

"For wet scrubbing of textured and uneven floors (e.g. tiles, rubber napped floorings, stoneware). – universal application on a number of floorings with structured and uneven surfaces, joints etc. – wide range of application and improved cleaning results through 5 especially combined filament types in one brush – integrated wear indicator for the optimal usage of the brush and to avoid damages operating widths: 12"" - 22"" Fill type: 5-component mixture Water hole: with / without"

"For care film and gloss polishing of various floors. – fast and clear identification of the brush type (known look of the natural fibre) – optimal polishing behavior by excellent properties of a mixture of natural fibres of the leaves from agave (fibre) and sugar palm (bassine) – careful application of polishing compounds and refurbishing of maintenance films – integrated wear indicator for the optimal usage of the brush and to avoid damages operating widths: 12"" - 22"" Fill type: Union nature mixture Water hole: with / without"

"For cleaning heavily soiled floors. Available in various grit sizes depending on degree of dirt and ground. – fast and clear identification of the brush type (known „grey shade“ and clear marking of the grit size) – available from stock in 3 different grits (K 80, K 180, K 500) – reliable dirt removal even when there are strong dirt crusts – abrasive effect for various floors – integrated wear indicator for the optimal usage of the brush and to avoid damages operating widths: 12"" - 22"" Fill type: K 80, K 180; K 500 Water hole: with / without"

"For wet scrubbing of uneven, medium hard to hard floors (nature and limestone, PVC, linoleum). – fast and clear identification of the brush type – red outer row refers to a medium brush (colour shape inspired by pad colours on the market) – optimal properties for uneven grounds – medium hard, supple but at the same time resistant filament bundles – excellent dirt removal properties accompanied by gentle floor treatment – integrated wear indicator for the optimal usage of the brush and to avoid damages operating widths: 12"" - 22"" Fill type: PP 050 Water hole: with / without"

"For wet scrubbing of solid floors (linoleum, stone, tiles). – fast and clear identification of the brush type – black outer row refers to a hard brush (colour shape inspired by pad colours on the market) – excellent dirt removal properties – strong, resistant filling – long life due to tight filament bundles – integrated wear indicator for the optimal usage of the brush and to avoid damages operating widths: 12"" - 22"" Fill type: PP 060 / 070 Water hole: with / without"

"For shampooing textile floors. – fast and clear identification of the brush type – white outer row refers to a smooth brush (colour shape inspired by pad colours on the market) – optimal foam properties thanks to optimized fill and fill pattern – effective and gentle cleaning of textile fibre structures – integrated wear indicator for the optimal usage of the brush and to avoid damages operating widths: 12"" - 22"" Fill type: PP 030 / 040 Water hole: with / without"

Eccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure) The HD-E Eccentric screw pump in the industrial version transfers the advantages of the Drum pump low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources. * also available in special immersion depths * Pump tube equipped with Lutz original hand wheel * Media examples: Oils, waste oils, disposal liquids, paints. * Smooth running * Uniform volume flow * Gentle, low-pulsation product conveying * Low wear * Easily detachable outer tube

large portfolio for the internal coating of cans and tubes

automatic spray guns for precise coating and various application areas

Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as Paints, lacquers, mineral oils, acids, alkalis, mineral oils and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The world´s only drive board with antibacterial effect. - recommended for all commercially available pads, especially for textile/microfiber pads. From a minimum thickness of 12 mm - over 99.9% effective - drive board body and harpoon drive face are fused together by patented laser welding to form an absolutely firm connection - pads are held securely and gently by innovative plastic barbs - chemical resistant to all commercially available cleaning agents - perfect pad hold when lifting the machine due to integrated cro-lock operating widths: 16"" - 18"" Water hole: with / without"

Eccentric screw pump tube B70V-D Industryfor three-phase motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with Mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V-D 12.1 Eccentric screw pump in the industrial version is a powerful positive displacement pump for medium, highly viscous and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials. * Uniform volume flow * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2

Description:The double diaphragm pump is suitable for pumping small quantities in the laboratory sector and for occasional filling processes. * typical applications: Chemical circulation and feed, liquids with solid particles such as paints and lacquers, electroplating liquids, etc. * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

Degreasing bath treatment Ultrafiltration is established for a long time for applications like treatment of emulsions, degreasing baths or craft detection oils. With ultrafiltration, oil and dirt particles are separated. So, the particle-free filtrate can be used for degreasing again. According to the recommendations of suppliers for degreasing chemicals tensides are added to the degreasing bath. So, lifetimes up to 3 to 6 months can be reached for degreasing baths. Osmo Membrane Systems GmbH offers an upgrade for your degreasing plant in replacing the polymer pipe modules by ceramic modules. Ceramic modules are more temperature resistant, chemical resistant and changing pH-values. On the one hand, the separation efficiency will be increased and on the other hand, the lifetime of the degreasing plant will be increased significantly, because polymer modules have to be changed much more, depending on the application. The costs for the upgrade are equal to the costs for working with poly

Round dialysis cells The cylindrical electrode is mounted into the cylindrical membrane, which is hold by a strong pervious pipe from the inside and protected by a mesh from the outside. The anolyte is leaded through the anode pipe through the bottom of the electrode and flows constantly through the toroidal gap between electrode and housing to the anolyte outlet. By the standardized membrane support, a multitude of membranes can be used. The pipe cells of OSMO Membrane Systems GmbH are easy to handle, because even a 2m long electrode only weights 8 kg. Advantages of the OSMO round dialysis cells: Can be opened without tools by quick release fasteners Anode pipe made of seamless thick-walled stainless steel 1.4571 (standard) – treated titanium available on request Continuously anolyte inflow and outflow as well as selective anolyte distribution Anode can be turned inside the membrane

Flat dialysis cells Flat dialysis cells of OSMO Membrane Systems GmbH are designed very robust and without any dead spots, to avoid sedimentation of the painture. The membrane is is very pressure resistant and tearproof. The fluent properties are optimized according to the degassing properties. Design in 3 standard sizes Aniones-exchange-membrane with a high permselectivity Support material PP Robust design with height-adjustable mounting Anode material 1.4571 (standard), treated titanium on request Cell design with PP and P E

Ultrafiltration of kathodic deposition paint The filtrate of the ultrafiltration is added to the immersion bath by a spray ring, which is installed directly over this bath. So, the recovery of the remaining color is possible and by separation the color particles, painting defects can be avoided. In the last spray zone, organic solvents from the ultrafiltration are washed away be demineralised water. Concentrated with these solvents, the water is leaded into the color bath. The process is a closed loop without any waste waters. The paint bath can be contaminated with pre-tretment chemicals like e.g. phosphates, chlorides, chromates. so, a part of ultrafiltrate has to be leaded out to avoid concentration of the paint bath with these chemicals. If no ultrafiltration is used, big amounts of waste waters will arise, which are difficult to dispose. Our ultrafiltration plants are customized in membrane are, retention rate and membrane type.

Anolyte station Individual approaching flow of each dialysis cell be measuring each single volume flow.... ... constant anolyte quality by high-resulting measurement of conductivity.

SMiTO TECHNIC is highly specialized in the field of paint removal technology and thus able to design and develop individual systems exactly tailored to your specific paint stripping tasks. Wherever our standard systems do not match your needs, we can develop creative solutions for the most-varied of requirements. In doing so, we attach special importance to plant safety and high quality.

Suitable for water-based paint strippers with operating temperatures of up to 90 °C. Modular design for the highest level of safety and (if needed) customization to the desired height of the spraying chamber. Electronics and paint stripping agent tank in separate "technical module." Uniform coating of the workpieces through the use of a nozzle system in the spraying chamber, consisting of needle-nose jet nozzles and flat-jet nozzles and a rotatable cage for the workpieces. High loading capacity by virtue of the cage diameter of 1500 mm and effective interior height of 2100 mm; max. cage load: 750 kg. Stripping agent tank: 1000 liters for long effective life of the medium, indirect electrical heating. All parts coming into contact with the media are made of stainless steel. Easy operation with clearly arranged displays and operating controls. High-quality Siemens control for monitoring the paint stripping process.