Results for
BEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
The VA-L series aluminium saws define a whole new performance class with their design. Servo-driven axes and a harmonic drive gear guarantee high-performance and process-reliable operation from aluminium alloys to copper and brass alloys. Due to the technical features and the associated sawing performance, the sawing results meet requirements regarding the surface of Rz < 8 µm and cutting tolerances < 0.1 mm. In many cases, further processing of the surface is therefore no longer necessary. All components of the aluminum circular saws and their processes are designed with this in mind. On the one hand, this includes material processing in terms of chip flow and minimum rest piece length, but also machine components of the latest generation. The VA-L aluminium saws are equipped as standard with pneumatic short-stroke cylinders for material clamping and do not use any hydraulics.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Hose cover against radiant heat maximum 450 ° C. Outside with aluminum foil and inside with glass silk or Kevlar fabric. Closed or with Velcro for quick installation and removal.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Protective hose, flame retardant and insulating against heat and flying sparks for cables
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Protection against heat and flames up to approx. 1100 ° C for approx. 15 minutes and can withstand ambient temperatures of 73 ° C 260 ° C without limit. Inner life made of calcium silicate yarns, textured and twisted, good insulation properties.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Pitched Roof Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene. With precisely fitting Z-fold on top and bottom edge and lateral indentations for safe shear stress transfer in direction of the water flow; no possibility of substrate reaching the protective layer thanks to tight fit of horizontal and lateral edges. The integrated chambers provide excellent anti-slippage for the substrate, high water storage capacity and an integrated water distribution system. Lay out according to manufacturer informations with max. 80 mm overfill (incl. vegetation mat).
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Water Retentionbox WRB 170 on roofs used as retention areas, under extensive and intensive vegetation as well as traffic areas such as terraces, fire brigade access roads, car parks, etc.With closed, load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System With Capillary Bridges to transport stored rainwater from the drainage level into the substrate layer and to increase evaporation High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible)
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for intensive green roofs with 0° roof pitch and varying layer heights.Base plate with load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for extensive green roofs with 0° roof pitch.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Water Retention Box made of recycled PP material. With high temporary and possibly permanent retention volume in combination with a Flow Control System for specific regulation of water discharge and/or water storage.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Meander Water Retention Board FKM 60 is used for multi-layered extensive green roofs.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Elbows and connections made of steel and stainless steel for oil, gasoline and air hose lines. The connections are pressed onto the assembled hose.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Super lightweight reusable dash aluminum fittings. Manufactured according to aviation standards, suitable for petrol, oil, methanol, water and air. The first choice when it comes to reliable and flexible hose lines.
Request for a quotePRESSTECK S.P.A.
Germany
Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the customer's downstream process under very tight tolerance specifications. Why? Because the sleeves cannot be further processed if the geometries vary. Absolute precision is therefore required. We can offer absolute precision. The customer commissioned us with the production of the sleeves. On the one hand, because we fulfil the special deep-drawing requirements. On the other hand, because we can offer an associated, targeted heat treatment for material stress relief in-house.
Request for a quoteBIZERBA SE & CO. KG
Germany
The robust metal detector can be variably used in dry and wet environments. It ensures best test results for packaged or unpackaged piece goods. VARICONcompact safely checks for any contaminants enclosed in the product such as steel, stainless steel and non-ferrous metal, e.g. aluminum. The compact metal detection system works with highest detection sensitivity. Ideally suitable for a save test performance. With its robust stainless steel conveyor belt construction the VARICONcompact inspects piece goods of up to 20 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection.
Request for a quoteBIZERBA SE & CO. KG
Germany
Metal detection coil INTUITY reliably detects enclosed contaminants in your product or bulk goods. INTUITY can be flexibly used in dry or wet areas and achieves best results with its multi-simultaneous frequency technology: It simultaneously checks with at least two frequencies if your packaged or unpackaged product contains steel, stainless steel, iron or non-ferrous metal. The metal detection coil helps you to enhance the quality of your products and to minimize the risk of possible recalls. INTUITY reliably checks if your packaged or unpackaged products or bulk goods include metal foreign objects. It is impressive in terms of its high accuracy: With its multi-simultaneous technology it checks at the same time with at least two frequencies within a range between 30 and 900 kHz
Request for a quoteBIZERBA SE & CO. KG
Germany
Quick and reliable detection of all ferrous and non-ferrous metals in packaged and unpackaged piece goods. The compact metal detection system offers you safe performance and highest detection sensitivity. With its robust stainless steel conveyor belt construction the VARICON+ inspects piece goods of up to 50 kg. A very short metal-free zone (MZ) ensures interference-resistant, reliable inline metal detection. To suit the area of installation the system is available with a modular belt (wet area) or a flat belt (dry area). The conveyor belts are available with variable belt widths. The motor controller is fitted either with a conveyor stop in case of metal detection or an application-specific rejection system. For easy and thorough cleaning the VARICON+ series has a hygienic design. Quality which is reflected in BRC, IFS and HACCP certifications. The VARICON+ comes with IP65 protection. Higher IP ratings are optionally available.
Request for a quotePRESSTECK S.P.A.
Germany
Experts for deep-drawn parts made of stainless steel, aluminium and other non-ferrous metals (including brass, copper and nickel silver).from new development to series production: We develop perfect deep-drawn parts. Pressteck is one of the world's leading specialists for deep drawing individual parts on transfer presses and for their further processing into assemblies. In this non-cutting forming process, we produce hollow parts in several stages from a metal strip that can be made of aluminium, stainless steel, copper or brass, among other materials. Deep drawing has decisive advantages over other processes: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and perfect deep-drawing technology beyond what has been possible so far.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
The automatic plate saw VPS60-160A is BEHRINGER's solution when it comes to fully automatic cross-cutting of large plates and blocks. The vertical arrangement of the saw band has clear advantages over the horizontal design, as the engagement length of the saw band is significantly shorter. As a result, the cross cutting plate saw offers significantly higher cutting capacities while at the same time reducing tool costs. Thanks to their robust basic design and high-performance components, the automatic plate saws of the VPS series are designed for demanding applications in the steel trade, industry and metal production. From non-ferrous metals and aluminum to simple work steels and difficult-to-cut materials such as Inconel or titanium. Their modular design allows the cross cutting plate saw to be individually adapted to the customer's application.
Request for a quoteANDRITZ KAISER GMBH
Germany
The lines are equipped for such processes as trimming, recoiling, precision leveling, and cutting-to-length. ANDRITZ Sundwig manufactures cut-to-length lines for steel, stainless steel, aluminum, and all types of non-ferrous metals in strip widths from 600 to 3,200 mm and strip thicknesses from 0.1 to 25.0 mm. Our references include steel plants, steel service centers, the automotive industry, and metal processors of various kinds. Individual customer solutions distinguish our innovatively designed, frequently proven, and highly productive lines ANDRITZ METALS cut-to-length lines cut aluminum sheet and strip for industrial applications and for the aeronautical industry to the desired precise dimensions. These lines can process coils and sheets of up to 2,850 mm in width, up to 15 m in length, and at strip thicknesses between 2 and 15 mm.
Request for a quoteSCHOCK GROUP
Germany
SCHOCK offers complete metal assembly systems with integrated functional components such as soft-close mechanisms, adjustment mechanisms, and mounting systems. The SCHOCK High Cabinet Full Extension, measuring 600mm in length and designed for installation in wooden cabinets with a load capacity of up to 120 kg, is available as a ready-to-install assembly: Full extension, length 600 mm Load capacity of up to 120 kg Guided both at the bottom and top Mounting brackets with front adjustment Soft-closing self-retraction with a 50 mm movement in the lower and upper guides Set packaging – pre-assembled and includes installation instructions We are also happy to manufacture other assemblies upon request according to your specifications. Length: 600 mm Load capacity: up to 120 kg Comfort features: Soft-closing self-retraction
Request for a quotePROFILMETALL-GRUPPE
Germany
Roll forming of all sheet metal materials such as steel, aluminum, stainless steel, copper, titanium, molybdenum, pre-painted materials, composite materials from 0.08 mm material thickness.
Request for a quotePROFILMETALL-GRUPPE
Germany
With the newly developed XELLAR profiling system, PROFILMETALL combines for the first time all requirements for smart profiling in one system: Whether roll forming, punching or weld Features and benefits Intelligent digital process communication for sensor monitoring, electronic tool adjustments ... Free choice of drive concepts, tailored to the product Customized system concepts and modules Individual equipment - integrated in the machine frame, e.g. B. coolant pan, roll forming tool storage compartment, drawer, controls Closed production system for more safety and noise reduction Coolant splash protection through protective hood Integrated oil mist extraction Resource-saving housing design enables the housing modules to be reused inexpensively when changing products Machine-integrated transport device for quick spatial relocation Simplification of the change of roll forming tools through a new machine design
Request for a quoteHAINBUCH GMBH SPANNENDE TECHNIK
Germany
With our hexagonal clamping heads you get up to 25 % more clamping force and higher output with the same clamping cylinder actuating force that is used to actuate our SPANNTOP chucks. The pyramid arrangement of glide surfaces makes it possible. In addition the hexagonal geometry ensures that TOPlus is more resistant to contamination than former clamping head / chuck systems. Therefore, TOPlus is even better suited for raw material, cast and forged parts, as well as fine-particle non-ferrous metals such as brass. With a concentric precision of ≤ 0.005 mm!
Request for a quoteHAINBUCH GMBH SPANNENDE TECHNIK
Germany
With our hexagonal clamping heads you get up to 25 % more clamping force and higher output with the same clamping cylinder actuating force that is used to actuate our SPANNTOP chucks. The pyramid arrangement of glide surfaces makes it possible. In addition the hexagonal geometry ensures that TOPlus is more resistant to contamination than former clamping head / chuck systems. Therefore, TOPlus is even better suited for raw material, cast and forged parts, as well as fine-particle non-ferrous metals such as brass. With a concentric precision of ≤ 0.005 mm!
Request for a quoteHAINBUCH GMBH SPANNENDE TECHNIK
Germany
The segmented clamping bushing SE with the hexagon socket sits on the clamping pyramid, absolutely form-fitted in every clamping position and thereby enables maximum machining performance with minimal vibration and thus less tool wear. The full-surface contact of the segmented clamping bushing on the mandrel ensures a significantly better insensitivity to contamination than previous segmented clamping bushing/mandrel systems. Therefore, these segmented clamping bushings are even better suited for raw material, cast and forged parts, as well as fine-particle non-ferrous metals such as brass. And they offer this suitability at run-out of ≤ 0.01 mm and in the premium version at ≤ 0.007 mm.
Request for a quoteResults for
Non-ferrous metals - Import exportNumber of results
26 ProductsCompany type
Category