Results for
BRUGGER GMBH MAGNETSYSTEME
Germany
¹ Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The magnetic door stay is intended for fitting/attachment in/to door leaves. When fitted, the magnetic door stay is hidden in the door leaf. A separate installation set (TFS26-MONT) is available. With both installation variants, the door is held at the installation point of the disc when the door leaf with integrated door stay slides over the disc. Product TFS26-HlsKs serves for side mounting of our door stay to the door leaf.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Magnets in different designs as a visual highlight on your memo board.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
» Attention very strong holding force in case of direct contact with metal » Are particularly suitable for walls with magnetic paint » Excellent air gap bridging Alternative to the standard we also offer individual solutions: » Lacquering also possible in other colours
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » no nickel – no allergy » attractive design » grip edge for easy detachment » magnets are protected and do not break (possible in case of raw magnets) » usable on both sides (for example for paperclips, pens, scissors) » top / bottom colour mix Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » higher holding force
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » High force on a small surface » Manufactured without glue » easy to grip, easy to detach Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » higher holding force
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Following standard colours are available ex stock: blue, yellow, green, orange, red, black, white Following standard colours are available short term: brown, grey, light blue, pink, turquoise, violet The NdFeB magnets with a diameter of less than 25 are not fitted with a plastic ring on the holding surface. Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » Plastic housing with metallized surface (for example silver)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Magnetic system with stainless steel body and strong neodymium magnet core. This series have a deeper magnetic force than the classic flat pot systems. Two milled surfaces on the perimeter allow to fix the system with a tool. The holding surface is over molded with a hard type of rubber (TPE) and protects the magnet from strikes. At the same time the rubber effects a noise absorption.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Permanent Magnetic Circular Chuck Type RNF with neodymium magnet system and low height are used for clamping of small and thin workpieces. Structure: — Neodymium magnet system, steel body, — Max Pole pitch 1,5+0,5mm — Holding power 80N/cm² — Magnetic field height 4mm — Pole plate wearing limit 4mm — Switch travel MAG-ENT-MAG 180° Recommendation: Fine pole circular chuck for small parts
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of processing tools. The chipboard is activated via a removable hex shifter. PMNM palletising clamping plates are available in 3 versions: Structure: — Neodymium magnet system, steel body, — Transverse pole pitch 1.4+0.5 mm — Holding power 100N/cm² — Magnetic field height about 5 mm — Pole plate wearing limit 6 mm Recommendation: High-precision plate for grinding and eroding
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Permanent magnetic chucks type PMNEO-X are super strong compact chucks for heavy cutting. Parts from about 30x15x6mm are stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. The chipboard is activated via a removable hex shifter. Structure: — Double neodymium magnet system, steel body — transverse pole pitch 11+4mm — Holding power 150 N / cm2 — Magnetic field height 10mm — Pole plate wearing limit 6mm Recommendation: Super Strong chuck for milling
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of the processing tools. The chipboard is activated via a removable hex shifter. Structure: — Neodymium magnet system, steel body — transverse pole pitch 1.4 + 0.5mm — Holding power 100 N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 6mm Recommendation: High-precision chuck for grinding and eroding
Request for a quoteRATEC GMBH
Germany
— Magnetic rubber or neodymium magnets — Temperature exposure up to 60 °C, on request up to 80 °C — Can be delivered with or without chamfer — Partially available with and without groove — The adhesion side is polished — The open design is also available with aluminium caps screwed to the front — The magnet is released with a separate lifting tool
Request for a quoteRATEC GMBH
Germany
All series are available with or without handlebar grip and with or without additional holes to accommodate angles. The usage possibilities of the standard magnets can be extended individually through accessories such as longitudinal or frontal suppressing or clamping adapters. — Magnetic rubber (series A) or neodymium magnets (series P and PDA) — Temperature exposure up to 60 °C, series P and PDA on request up to 80 °C — Eccentric removable — Smooth surfaces, easy to clean
Request for a quoteHAINBUCH GMBH SPANNENDE TECHNIK
Germany
Clamp difficult or easily deformable workpieces In daily use you are optimally equipped with the TOPlus or SPANNTOP chucks. However, there are always components that are difficult to clamp due to the contour, or that will be deformed through radial clamping. So what is required is an axial chuck, which in addition can also be set-up very fast. Clamp axially on a neodymium magnet The answer: HAINBUCH magnet module. With the magnet module you can clamp components axially on a neodymium magnet. The HAINBUCH magnet module is set-up in only 30 seconds. Your basic clamping device is already mounted. You exchange the clamping head that is included in the scope of delivery. When clamping, the magnetic clamping device is pulled onto the flat contact area of your basic clamping device.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Neodymium magnet - Import exportNumber of results
18 ProductsCompany type