Multi couplings - Import export

Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.) The MALC type realizes a 2mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6mm. Special valve design enables connection of socket and plug under dynamic pressure of up to 8MPa. When connected, the distance between the socket plate and plug plate is designed to be 30mm for all sizes. This means any size of Cupla can be mounted and used on the same plate. Airless structure valves prevent outflow of fluid and admixture of air into the fluid line. Autocatalytic NickelPhosphorus coating is adopted for surface treatment over special steel body and internal parts. This coating is environmentfriendly.

Connects multiple lines simultaneously with a single operation for different fluids and sizes. Ideal for automated hydraulic or pneumatic cylinder operated systems that need to connect and disconnect several lines simultaneously. Automatic shutoff valves in both sockets and plugs ensure no outflow of fluid on disconnection. Body materials other than stainless steel are available, which can be ordered with or without valves (madetoorder products). Snap ring and screw threadin types to mount on the base plate are standardized. MAS type can accept axial eccentricity between socket and plug. The allowance of eccentricity is within the radius range of 0.3mm. Cupla connection with fluid under dynamic pressure cannot be made.

Simultaneously connects several ports securely in one operation. Greatly reduces changeover time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Comes with lock mechanism to prevent accidental disconnection. Large flow equivalent to that of SP Cupla Type A. Two kinds of plates are available for each size. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Selfaligned valve design provides safety sealing of individual socket or plug when disconnected.

Simultaneously connects several ports securely in one operation! Greatly cuts cycle time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Comes with lock mechanism to prevent accidental disconnection. Valve on socket side only.

- One interface for compressed air, gases, liquids, electrical and electronic signals - Fits to Eisele Adaptive insets - Can be assembled as bulkhead - Material Al nickel-plated or stainless steel - Temperature range -20 to +120 °C - Working pressure range -0,8 to 0 bar or 0 to 24 - Up to max. 14 connections

- One interface for compressed air, gases, fluids, vacuum, electrical and electronic signals - Maximum modularity due to freely configurable connections - Integrated coding in the housings prevents incorrect connections - Easy, tool-free mounting and dismounting - Locking lever reduces the force needed for assembly - Machine set-up times are reduced - Fits to Eisele adaptive inserts - Coupling and slotted nut material: Chemical nickel-plated aluminum - Lever materials: anodized aluminum / 1.4301 (304) stainless steel - Other materials: 1.4404 (316L) stainless steel / A2 / POM - Knurled screw with retaining cable

— Plug connectors series 15 — With shut-off — Can be assembled as bulkhead — Sealing FPM — Material Al natural anodized, brass nickel-plated — Temperature range -20 to +120 °C — Working pressure range -0,8 to 16 bar

A single operation makes simultaneous connections for multiple lines that have a variety of different fluids and sizes. A special design minimizes air admixture in fluid lines upon connection. Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.) The MALC type realizes a 2mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6mm. Special valve design enables connection of socket and plug under dynamic pressure of up to 2MPa. When connected, the distance between the socket plate and the plug plate is designed to be 30mm for all sizes. This means that any size of Cupla can be mounted and used on the same plate. Airless structure valves prevent outflow of fluid and admixture of air into the fluid line.

Simultaneously connects several ports securely in one operation! Greatly reduces changeover time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Comes with lock mechanism to prevent accidental disconnection. Large flow equivalent to that of SP Cupla Type A. Two kinds of plates are available for each size. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Selfaligned valve design provides safety sealing of individual socket or plug when disconnected.