Metals%20-%20machines%20%20&%20%20equipment - Import export

HPM Breeze is the consequent development of the common CL-, MQL and MQCL-procedures. Fluids will be checked during the production process and applied in a certain amount at a certain time and at a predetermined location. The HPM Breeze-procedure is extremely fine with an aerosol that adheres like a dense fog around the working area. HPM Breeze forms a completely closed and highly lubricating film. Where previously many litres of liquid were necessary it is now a small fraction thereof which suffices. The HPM Breeze process is used to lubricate and cool machining processes with extremely small quantities of cooling lubricant. An air-fluid mixture that prevents the development of frictional heat with optimal lubrication is employed for this purpose. The remaining heat is dissipated with the swarf. The LSJ Z35 is offered in 2 versions. 10 bar is standard. For more demanding applications, the LSJ Z35 is available in a version with 16 bar.

Our Breeze technology has many enormous advantages over the previous classic lubrication applications. Discover enormous savings potential for mass production when using our LSJ Mini in your process. This system can be used optimally in the event of always consistent tool operations. For the machining process, an average of between 5 and 50 ml of lubricant is used per process hour and tool. These consumption values can also be briefly — depending on the requirements of the individual operation — increased to up to 200 ml per process hour. In addition to this excellent advantage over the previous method, the HPM Breeze method offers further enormous advantages from an economic and ecological point of view. • For optimum use with a cooling channel diameter of 0,9 mm² and up. • Manual adjustment of the pressure parameters • Optimally suited for consistent series processes with one parameter

Universal spray head where the spray quantity is set via a scaled measuring drum. This makes it possible to check the set quantities at any time. Any changes are immediately visible and can be corrected. With constant parameters (fluid, spray and fluid pressure), the quantity is always 100% reproducible. The supply line exits at an angle of 90° to the spray jet. Our LEO spray head is available in two variants: The LEOR spray head has an M5 thread for fastening to a customer-side mount. The LEOB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. Low pressure range from 0,5 - 2,5 bar Air consumption from 2 -5,5 /min Viscosity range from 2.300mm²/s (20°C) - 500 mm²/s (40°C) Spray with nearly round cone full of about 15 ° Available in the nozzle lengths 30, 70, 105, 130 und 155 mm

The brand-new PPJ system impresses not only with its well-conceived components and size but also with its innovative form. In this system, we have combined our decades of experience in an attractive design. The independent regulation of fluid and spray air pressure achieves excellent results even with higher-viscosity media. Available for up to 6 spray heads and in versions with 1, 3 and 5 litres, this system has a very compact design and therefore takes up extremely little space when installed. The system is suitable for the initial equipment of machines as well as for subsequent installation. The PPJ system can be used with our spray heads (starting on p. 20) and the JOP drip-feed dosing device (p. 30) up to a maximum viscosity of 2300 mm²/s at 20 °C or 500 mm²/s at 40 °C (except for substances containing paint, resin and glue).

Small but powerful. Our power pack The smallest spray head available in the HPM standard range. Suitable for tight installation situations. The quantity is set on the back. The desired quantity can be reliably set using safety bolts. The supply line exits at an angle of 90° to the spray jet. Our PSM spray head is available in two variants: The PSMR spray head has an M5 thread for fastening to a customer-side mount. The PSMB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts

Application possibilities and advantages of the TCJ series If you use a fluid or fluids up to a viscosity of max. 100 mm²/s at 20 °C (except for substances containing paint, resin and glue), then our self-priming systems of the TCJ series are just the right thing for you. The advantage of our TCJ system is that it reduces and prevents dirt ingress into your process. Our 10- and 25-litre systems are adapted to commercially available fluid containers. This allows the container to be directly changed — without cumbersome refilling. The result is no dirt in the container and thus a process that continues to function optimally. Connection possibilities for up to six spray heads. Container available in 2,5 to 20 Liter Optional Level control Control via 24 V DC electrical valves as standard. Pneumatic and other electrical valve voltages on request.

Our absolute classic. Probably the most frequently sold spray head in the world. Universal spray head, very robust and suitable for all applications. Due to the large channel diameters and a direct supply, our HTR spray head can also be used with especially critical and viscous media. The quantity is dosed in the front at the nozzle. Our HTR spray head is available in two variants: The HTRR spray head has an M6 thread for fastening to a customer-side mount. The HTRB spray head has a ball joint. This allows it to be attached flexibly and precisely with the flexible HPM Technologie mounts. All of our spray heads are available individually or as a spray head group. The spray head group contains air and fluid connections (check valve) for the distributor. An optional check valve mounted on the spray head prevents the fluid from dripping out through the spray head in the case of a critical line route or critical positioning

The deburring grinding machine is a manually operated, user-friendly deburring machine that is suitable for various machining processes such as grinding, deburring, edge rounding and polishing of metal surfaces. The swivel arm can rotate 180° and enables the simultaneous mounting of two machining discs. The machine is equipped with a vacuum system that fixes the workpiece on the table.