Metal brushes - Import export

Roller brushes Type 422 with sub-bodies e. g. tubular cores with journals are defined as having a body length longer than 100 mm (for brushes shorter than 100 mm, see "Circular brushes"). The brush cores (plastic or wooden cores with mechanically anchored bundle of fill material) either are mounted on steel shafts (WK1) or Steel /stainless steel tabular cores with journals (WK1 resp. WK4) for strength and rigidity. The comprehensive range of dimensions, core materials, fill materials and fill configurations demonstrates the versability of Kullen-Koti again and again. We would be pleased to supply you on request with details of special designs with wood or metal bodies. In case of brushes with non-cylindrical cores, we would like to ask you to send us a drawing or simply discuss your requirements with our technical consultant. Fill material densities: - High fill density EA1, - normal fill density EA2, - low fill density EA3. Fill configurations: In addition to a full fill...

Kullen-Koti strip brushes with metal backing tape have a big advantage over other brush constructions with rigid plastic bodies. This is because they can be formed to ring brushes with a diameter of 12 mm and with a bore of 5 mm up to the biggest diameter of 2.000 mm with an inward diameter of 1.000 mm. The strip brushes in arch form cannot only be produced in half circle form, but also in every other separation form (for example 45°). The larger the dimensions the better multiple brush segments can be mounted around the perimeter. All fill material qualities are possible, e.g. natural bristles and hair, plant fibres and synthetic filaments. As backing material we use galvanised steel-, stainless steel- (1.4301, 1.4571) or brass band.

Our special types of sealing brushes consist of 16 particular plastic profiles which we can supply in a comprehensive range of variations. The two constructions of sealing brushes are: Strip brush construction: that means our strip brushes with metal backing are mounted in plastic profiles. Punched brush construction: consisting of a solid plastic profile with bundle holes in which the fill material has been mechanically anchored. Depending on the fill material you can choose a fill density of high EA1, medium EA2 or low EA3. You can choose:- all fill types, e.g. natural bristles and hair, plant fibres, wires and synthetic filaments. - different trim heights (BH) (free bristle length) We can also supply all sealing brush types with fixing holes in the holding flanges, e.g. 22 available sizes of round holes and 13 sizes of elongated holes. Standard lengths are usually 1000 mm or 2000 mm. On request lengths of up to 5000 mm can be supplied, depending on the type of profile. Of...

Our special types consist of 10 types of strip brushes with metal backing widths from 1,8 mm to 13,5 mm, which we can produce in a large range of variations.You can choose:- All fill types, e.g. natural bristles and hair, plant fibres, wires and synthetic filaments. - The backing strip material made of galvanized steel, stainless steel (1.4301, 1.4571) or brass.- The trim height (BH) (free bristle length)- The overall length from a few centimeters to the maximum length which can be transported. The strip brush type 60 will mainly be mounted in half-rings with various numbers of grooves around the periphery and therefore used as a roller brush. The ring diameters are 80 mm, 100 mm and 102 mm. We can supply holders for fixing the strip brush type 25 and type 40.