Lubrication systems - Import export

HPM Breeze is the consequent development of the common CL-, MQL and MQCL-procedures. Fluids will be checked during the production process and applied in a certain amount at a certain time and at a predetermined location. The HPM Breeze-procedure is extremely fine with an aerosol that adheres like a dense fog around the working area. HPM Breeze forms a completely closed and highly lubricating film. Where previously many litres of liquid were necessary it is now a small fraction thereof which suffices. The HPM Breeze process is used to lubricate and cool machining processes with extremely small quantities of cooling lubricant. An air-fluid mixture that prevents the development of frictional heat with optimal lubrication is employed for this purpose. The remaining heat is dissipated with the swarf. The LSJ Z35 is offered in 2 versions. 10 bar is standard. For more demanding applications, the LSJ Z35 is available in a version with 16 bar.

Our Breeze technology has many enormous advantages over the previous classic lubrication applications. Discover enormous savings potential for mass production when using our LSJ Mini in your process. This system can be used optimally in the event of always consistent tool operations. For the machining process, an average of between 5 and 50 ml of lubricant is used per process hour and tool. These consumption values can also be briefly — depending on the requirements of the individual operation — increased to up to 200 ml per process hour. In addition to this excellent advantage over the previous method, the HPM Breeze method offers further enormous advantages from an economic and ecological point of view. • For optimum use with a cooling channel diameter of 0,9 mm² and up. • Manual adjustment of the pressure parameters • Optimally suited for consistent series processes with one parameter

System Solutions for Rack and Pinion Applications As a supplement to the well-known gearbox product ranges, MS-Graessner offers system solutions in the field of rack and pinion applications for mechanical and plant engineering. The DynaGear, KS-TwinGear, DynaGear DG and DynaGear PL systems consist of precise system components developed for automation technology. These include: low-backlash precision gearboxes spur gears toothed racks lubrication systems 4 sizes from T2B= 53 Nm to390 Nm Feed forces up to 11 kN 2 precision classes Input speeds up to n1max = 6000 min-1 Feed speeds up 6 m/s Gear ratios from 5:1 to 15:1 Spur gear modules from to m2 bis m4

System Solutions for Rack and Pinion Applications As a supplement to the well-known gearbox product ranges, MS-Graessner offers system solutions in the field of rack and pinion applications for mechanical and plant engineering. The DynaGear, KS-TwinGear, DynaGear DG and DynaGear PL systems consist of precise system components developed for automation technology. These include: low-backlash precision gearboxes spur gears toothed racks lubrication systems With planetary gear output flange 3 sizes from T2B= 53 Nm to 210 Nm Feed forces up to 8 kN 2 precision classes Input speeds up to n1max = 5000 min-1 Feed speeds up to 6 m/s Gear ratios from 5:1 to 15:1 Spur gear modules from m2 bis m4

System Solutions for Rack and Pinion Applications As a supplement to the well-known gearbox product ranges, MS-Graessner offers system solutions in the field of rack and pinion applications for mechanical and plant engineering. The DynaGear, KS-TwinGear, DynaGear DG and DynaGear PL systems consist of precise system components developed for automation technology. These include: low-backlash precision gearboxes spur gears toothed racks lubrication systems 8 sizes from T2B = 225 Nm to 11250 Nm Feed forces up to approximately 200 kN 3 precision classes Input speeds up to n1max = 8000 min-1 Feed speeds up to 4 m/s Gear transmission ratios from 15:1 to 75:1 Spur gear modules from m2 to m8

System Solutions for Rack and Pinion Applications As a supplement to the well-known gearbox product ranges, MS-Graessner offers system solutions in the field of rack and pinion applications for mechanical and plant engineering. The DynaGear, KS-TwinGear, DynaGear DG and DynaGear PL systems consist of precise system components developed for automation technology. These include: low-backlash precision gearboxes spur gears toothed racks lubrication systems 8 sizes from T2B= 53 Nm to 2160 Nm Feed forces up to approximately 35 kN 3 precision classes Input speeds up to n1max = 8000 min-1 Feed speeds up to 10 m/s Gear ratios from 3:1 to 100:1 Spur gear modules from m2 to m6

The BaCo 2500 Variospeed is a fully automated filling, foil application and sealing machine, suitable for creamy to liquid filling media for plastic, tin or glass containers. Available performance versions: 2.500 units/h, 3.000 units/h or 3.500 units/h. all gearboxes are maintenance-free: Lenze main drive, Atek gearbox, Miksch stepping gear various cams on drive shafts of the gearbox: filling cam, control cam for valves, pre-sealing cam, lever arm for driving the metering pump and dispenser drive shafts with prockets for chain drives central lubricating system 8-up turntable with mechanical overload clutch backlog detector and monitor for incoming and outgoing containers filling unit with turntable metering unit 40 liters filling funnel dispenser with pre-sealing thermal sealing unit (conductive) integrated conveyor belt central, stepless height adjustment of conveyors and guides by a handwheel integrated SPS control system Siemens S7

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap machine frame from aluminium profile indexing transport system for jars horizontally working conveyor for jar infeed and discharge position control for jars in indexing rotary transport dosing pump from 1.4404 10 l hopper with level control filling nozzles driven by LinMot-e-motor pick and place system for pre-cut foils from magazines driven by LinMot-e-motor 1 spot sealer to fix the foil at the sealing rim of the jars sealing system with conduction sealing head capping station with LinMot-e-motor infeed conveyor for caps electric cabinet with operation panel manual central lubrication system safety doors with aluminium profile frame and windows from makrolon

Flexible for small lot sizes Fast jaw change with quick change design and high repeatability – that is what makes the B-Top jaw chuck product line so flexible. Particularly for small lot sizes. Thus in most cases machining the chuck jaw to size is unnecessary. Conveniently adapted to your requirement Also the insert bushing system is configured for small lot sizes and maximum flexibility. It enables clamping devices to be conveniently adapted to your requirement: Closed with ejector, spray nozzles, or with variable end-stop. Just the way you need it. And the innovative lubricating system ensures improved clamping force behavior of the wedge bar principle.

TAILORED POWER COOLING LUBRICANT SYSTEM Your products are characterised by high precision and perfection? Your processes are clocked from beginning to end? Your cooling lubricant system must be perfectly tuned? Offering a flushing capacity of 300 liters a minute, automatic filtration, automated sludge discharge, user configurable pump parameters, high-pressure tool actuation, and optional medium temperature regulation, the combiloop CL5 leaves no wish unfulfilled.

Gas Mixing Panels include the Waukee brand rotary vane compressors, air and gas Flo-Meters, and either a mechanical carburetor or RatioProver for precise ratio control. Panels are available with additive trim gas or air Flo-Meters. FEATURES: • Available with Lubed Vanes (includes a set of Phenolic Vanes and an Auto Lubricating System) or Non-Lubed Vanes (includes a set of Long Life Composite Vanes) • Available with outlet pressures ranging from 0.5-5.0psig. For higher pressures, consult UPC. • Two options available for ratio control: Standard Carburetor, RatioProver • Available with output capacities ranging from 200-12,000CFH • Available with Built-in Unloader for pressures between 0.5-2.5psig or with Bypass Relief Regulator for pressure lower than 0.5psig or higher than 2.5psig • Available with Standard turndown of 2:1 or 10:1 when used with a Compressor Pressure Controller • Includes Gas and Air Flo-Meters and Air Filter • Available with Trim Gas or Air Flo-Meters

Compact and modular presses for a wide range of medium sized parts. Flexible installation options as a single press in progressive or transfer mode or as fully automated press line. Overview: ● Pressing capacity: 3,000 - 10,000 kN ● Component size: medium ● Slide kinematics: crank ● Applications: stamping, cutting, forming, bending, embossing Features and benefits: ● The compact design requires little floor space and no foundation at presses below 4,000 kN. ● The very solid, low-stress annealed press bodies are FEM-calculated and optimized by so-called “hot-spot analysis” in areas which are subject to higher loads. ● Motor, clutch/brake unit, lubrication system and control are of German origin and guarantee a long service life and maximum dynamics. ● The slide guiding system ensures a high level of tilting rigidity and reduces the cutting impact during the cut through when it comes to the processing of higher-strength materials.

The Scotch-Yoke drive of the DTL series has a modified link drive characteristic and reduces the slide speed during the forming phase. Thus the presses are not only suitable for cutting, punching and forming tasks, but also for drawing operations. The extra time that the material receives for plastic flow significantly increases the quality of the produced parts. The reduced impact speed of the slide extends the life of the press and the die. Overview: ● Press capacity: 6,000 - 30,000 kN ● Part size: large ● Slide kinematics: link ● Application: as a single press system either as progdie or transfer mode, as well as a press line Description and benefits: ● The outside located pressure points and a long 8-fold slide guiding system well compensate off-center loads, spare press and die and ensure a constant part quality. ● The automatic centralized lubrication system increases pro-ductivity and availability.

Compact presses for a wide range of medium sized parts. Due to its drive-related slide kinematics, the MCL series is particularly suitable for drawn parts. Overview: ● Pressing capacity: 3,000 - 8,000 kN ● Component size: medium ● Slide kinematics: link ● Applications: stamping, drawing, forming Features and benefits: ● The compact design requires little floor space and no foundation at presses below 4,000 kN. ● The very solid, low-stress annealed press bodies are FEM-calculated and optimized by so-called “hot-spot analysis” in areas which are subject to higher loads. ● Motor, clutch/brake unit, lubrication system and control are of German origin and guarantee a long service life and maximum dynamics. ● The slide guiding system ensures a high level of tilting rigidity and reduces the cutting impact during the cut through when it comes to the processing of higher-strength materials.

The BaCo 2500 Variospeed is a fully automated filling, foil application and sealing machine, suitable for creamy to liquid filling media for plastic, tin or glass containers. Available performance versions: 2.500 units/h, 3.000 units/h or 3.500 units/h. • all gearboxes are maintenance-free: Lenze main drive, Atek gearbox, Miksch stepping gear • various cams on drive shafts of the gearbox: filling cam, control cam for valves, pre-sealing cam, lever arm for driving the metering pump and dispenser • drive shafts with prockets for chain drives • central lubricating system • 8-up turntable with mechanical overload clutch • backlog detector and monitor for incoming and outgoing containers • filling unit with turntable metering unit • 40 liters filling funnel • dispenser with pre-sealing • thermal sealing unit (conductive) • integrated conveyor belt • central, stepless height adjustment of conveyors and guides by a handwheel • integrated SPS control system Siemens S7

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap • machine frame from aluminium profile • indexing transport system for jars • horizontally working conveyor for jar infeed and discharge • position control for jars in indexing rotary transport • dosing pump from 1.4404 • 10 l hopper with level control • filling nozzles driven by LinMot-e-motor • pick and place system for pre-cut foils from magazines driven by LinMot-e-motor • 1 spot sealer to fix the foil at the sealing rim of the jars • sealing system with conduction sealing head • capping station with LinMot-e-motor • infeed conveyor for caps • electric cabinet with operation panel • manual central lubrication system • safety doors with aluminium profile frame and windows from makrolon

High-performance grinding spindles with a watercooled asynchronous motor External taper on working side Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system with air seal Spindles are completely dynamically balanced Taper true running <= 0.002 mm Drive via frequency converter Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below (PDF download 312KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

Spindles with air-cooled, three-phase, built-on motor Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system Spindles are completely balanced dynamically Taper true running <= 0.002 mm Drive via frequency converter or direct connection to main power supply Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below ( PDF download 190KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

Spindles with air-cooled, three-phase, built-on motor Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system Spindles are completely balanced dynamically Taper true running <= 0.002 mm Drive via frequency converter or direct connection to main power supply Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below ( PDF download 190KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

High-performance grinding spindles with a watercooled asynchronous motor External taper on working side Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system with air seal Spindles are completely dynamically balanced Taper true running <= 0.002 mm Drive via frequency converter Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below (PDF download 312KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

High-performance grinding spindles with a watercooled asynchronous motor External taper on working side Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system with air seal Spindles are completely dynamically balanced Taper true running <= 0.002 mm Drive via frequency converter Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below (PDF download 312KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.

High-performance grinding spindles with a watercooled asynchronous motor External taper on working side Pre-tensioning of the precision bearing groups using a spring system that does not have to be readjusted Long-lasting grease lubrication Non-wearing labyrinth seal system with air seal Spindles are completely dynamically balanced Taper true running <= 0.002 mm Drive via frequency converter Diameter to length ratio of up to 1:20 possible Further available spindle dimensions are listened in the spindle datasheet below (PDF download 312KB). Spindles are not sold on the Webshop, but spindle inquiries are accepted.