Gauges - Import export

Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment

Bourdon tube pressure gauges Stainless steel, polypropylene or phenolic Wetted parts AISI 316L or monel Dial size: 63 mm,100 mm to 160 mm Ranges from -1...0 to 0...1600 bar Solid front, safety version S3

Industrial pressure measurement covers a very wide range of gases and liquids. The physical and chemical properties of these products sometimes make them incompatible for contact with the sensing elements of pressure gauges or transmitters. In such cases the measuring instrument must be separated from the pressurized fluid by a system capable of transmitting the pressure to this instrument while isolating it from the fluid itself. This system is known as a diaphragm seal. Bourdon offers a wide range of diaphragm seals for nearly all applications and industries. Do not hesitate to contact our specialists to find the best solution for your application.

Tank gauges, oil pressure gauges, oil temperature gauges, boost pressure gauges, ammeters and voltmeters for additional installation. All items are from wellknown manufacturers in the field of display instruments

The P-Pen 1000 Ex from Schütz is the compact measuring device for the exact determination of operating pressures up to 5 bar. o simple operation o reliable measurement results o small and compact o extremely robust o with Ex Protection approval

The P-Pen 5000 Ex from Schütz is the compact measuring device for the exact determination of operating pressures up to 5 bar. simple operation, reliable measurement results, small and compact, extremely robust, with Ex Protection approval

The probe's measurement data can be sent to a PLC via Ethernet, EtherNet/IP, PROFINET or EtherCAT fieldbus Fieldbus compatible interface module: MG80-NE (Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET) / MG80-EC (EtherCAT) Up to 16 MG80-CM counter modules for measuring probes can be connected to each main module. Up to 64 MG80-CM or touch probes can be connected to MG80-NE via max. 3 LINK connections Up to 255 MG80-CM or measuring probes can be connected to MG80-EI/PN via LINK connections. Theoretically, up to 65,535 MG80-CM or mestasters can be connected to MG80-EC via LINK connections. MG80-CM Counter module for connection of one DK or DT series probe (with MT13) Easy installation on DIN mounting rail LZ80-K1/K2 I/O module for MG80-EI, MG80-PN and MG80-EC Equipped with 8 inputs and 8 outputs

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function

LT80 multifunction display with interface modules and clearly structured user interface Connection of up to 32 DK or DT probes (DT probes with MT adapter) Easy installation on DIN mounting rail High speed trigger module When connecting an encoder with TTL output pulses to the trigger module, measured values from up to 16 probes can be read out synchronously in dynamic applications The synchronous measurement data can be stored on the LT80 between LT80-NE Display 7-inch touchscreen LCD display for 2 to 16 measurement channels Different measurement modes and measurement functions selectable: Current value, MAX, MIN, P-P, ADD/SUB function, 2 or 4 step comparator function for automated measuring and sorting Display I/O status 3 different interfaces (USB stick, SD card, LAN) for data storage, data transfer and parameterization Different menu languages selectable (English, German, Japanese)

made from steel with carbide or ceramic insert with balls from steel, carbide, ruby, sapphire, plastic or ceramic

Bases are available with the following dimensions: Base TB 50 50 x 16 mm Base TB 80 80 x 16 mm Base TB 100 100 x 16 mm Base TB 120 120 x 20 mm Base TB 150 150 x 20 mm All bases have a bore Ø of 8 mm H7. They are mutually interchangeable. The bases are matt chromed and hardened. Burnished bases are available on request. The measuring surfaces faces are lapped. The metal collet attachment guarantees reliable fixing of the Dial Gauges.

Spare Dial Gauges are available for all Digital Thickness Gauges. They will be supplied without contact point and without lifting device. For Digital Thickness Gauges the data cables illustrated below are available. Data cable DCMD 232 This Opto_RS cable allows a fast connection of Digital Dial Gauges via a RS 232 data output directly to a PC or to other peripheral devices. Standard version 2 m long, maximum length 15 m optionally available. SUB-D jack 9 – pin / F. Cable for data output for series MD / FMD XX TB or FMD XX TA. Data cable DCMV 232 In standard version 2 m long. SUB-D jack 9 – pin.

This Stand converts the Dial Thickness Gauges e.g. K50, K100, J50, J100 and F1101/30 as well as the respective digital models, designed for hand-held use, to table models. Retrofitting this Stand to models already in use is possible.

The well thought-out design, accurate components and robust construction of our Precision Dial Gauge series offer reliability, durability and long working life. The standard features that enhance the quality across our entire product range are: Calibrations of all Dial Gauges are traceable to national and international standards. The final quality control for the whole series includes visual inspection and full mechanical functional tests. Supplied with Declaration of Conformity and Confirmation of Traceability. Materials and components selected specifically to ensure a long working life.

The Comparator Gauges Compika offer a high degree of security and precision. They are based on a solid and well thought-out construction taking into account the latest technology. They are manufactured by the most up-to-date methods. The following quality features characterize our manufacturing programme of Comparator Gauges Compika: Their design conforms to the requirements of DIN 879-1. This applies not only to the dimensions but also to permitted spans of error, hysteresis and measuring pressure. Effective shockproof system Pinions and shafts of the movement are jewelled After removal of the safety cap the adjustment screw on top of the case allows simple and safe zero setting of the instrument over the total measuring range. A safety cap prevents unintentional turning of the fine adjustment facility. Stem and spindle are made of hardened stainless steel. The measuring spindles are very sensitive on account of their accurate guides. Additional overtravel assists with the...

Dial Thickness Gauges are used for measuring the thickness of a very wide range of materials such as leather, paperboard, paper, felt, rubber, glass, sheet, metal, films, plywood and plastics. The shape of the feelers should be adapted to the material being measured. We supply all our Dial Thickness Gauges with contact points type c as standard, unless otherwise stated in our catalogue. Gauges can be supplied with other forms of contact points (a,b,d, or e) at no extra cost.

The large display has a good visual perception for easy reading of the measuring result. The use of aluminium for the body of the instruments makes them light and easy to handle. The Digital Thickness Gauges are switchable from metric reading to inch reading.

Prismatic Base TB 66P: particularly suited for measurements on tubes with a diameter of 10 – 100 mm. Long size flat Bases: burnished, available in the following dimensions: Base TB 200 200 x 20 mm Base TB 250 250 x 20 mm Base TB 300 300 x 25 mm All Bases have a bore Ø of 8 mm H 7. The Bases are hardened, ground and finely lapped. Flatness according to DIN 876/0. Further Bases with special lengths ore customized bases are available on request. We would be happy to advise you. > Contact us

The base is dull chromed, hardened and lapped. The metal collet attachment guarantees reliable fixing of the dial gauge. An additional internal hexagon screw makes exchanging the dial gauge easier. Each of our mechanical dial depth gauges is equipped with the 10 mm long special contact point 573/21.

The advantages of having a correctly set saw for all sawing work are well known. By using a Saw Setting Dial Gauge any specified set for various kinds of timber can be exactly maintained, thus ensuring maximum output and efficient workmanship. The method of measuring could not be simpler. The gauge is laid on the saw blade so that the sprung tracer touches the cutting edges of the saw. The pointer gives instant reading of the measurement. As the Gauge has a dial on both sides, it can be used either left or right handed.

Warning Unit EWP Meas.range (bar) Voltage -1 ... 0 400 V Acoustic warning unit with pneumatical whistle

Warning Unit EWIII Meas.range (bar) Voltage -1 ... 0 400 V optical and acoustic warning unit with howler, lamps and power failure supervision

Warning Unit EW0 Meas.range (bar) Voltage -1 ... 0 230 ... 400 V Acoustic warning unit with howler and power failure supervision

Vacuum Gauge VM Meas.range (bar) Connections -1 ... 0 G1/4 ... G1/2 visual control of the vacuum with „red-green“-section

Vacuum Switch VSA-1/4I Meas.range Exit Connections -1 ... 0 bar analogous G1/4 electronical vacuum switch with analogous exit signal

Vacuum Switch VSD-1/8I Meas.range Exit Connections -1 ... 1 bar 2 x digital G1/4 electronical vacuum switch with digital display and adjustable switching points