Results for
BLICKLE RÄDER+ROLLEN GMBH U. CO. KG
Germany
Flanged wheels are mainly used on rails to make sure that transport units stay on track. They are made up of a bearing and a wheel centre with a flange. They are used in everything from machine and systems engineering through to pulleys. These environments involve special conditions like heat, contact with oil or chips and electricity. Blickle has five different series of flanged wheels in its product range to meet various requirements. The SPKGSPO, SPK and SPKVS series have a single-sided flange. The DSPK and DSPKGSPO series have a double flange. The flanged wheels are also available in a variety of materials. Compressed cast nylon, steel and grey cast iron series are available. The flanged wheels use either a plain bore or ball bearings. Other bearing types are also available upon request.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Universal tank caps and threaded flanges.
Request for a quoteWEBER ULTRASONICS AG
Germany
Flange converters are available for all common frequencies (20 to 35 kHz) and power requirements (200 to 5,000 W). They are designed to keep weight at a minimum and their standardized quick disconnect allows for easy and fast integration with robot applications.
Request for a quoteBOURDON HAENNI GMBH
Germany
Industrial pressure measurement covers a very wide range of gases and liquids. The physical and chemical properties of these products sometimes make them incompatible for contact with the sensing elements of pressure gauges or transmitters. In such cases the measuring instrument must be separated from the pressurized fluid by a system capable of transmitting the pressure to this instrument while isolating it from the fluid itself. This system is known as a diaphragm seal. Bourdon offers a wide range of diaphragm seals for nearly all applications and industries. Do not hesitate to contact our specialists to find the best solution for your application.
Request for a quoteNOVOTECHNIK MESSWERTAUFNEHMER OHG
Germany
Absolute rod style position transducer for integration in cylinders especially for mobile applications ; NOVOSTRICTIVE non-contacting, magnetostrictive measurement principle; non-contact position detection with ring position marker; unlimited mechanical life span
Request for a quoteNOVOTECHNIK MESSWERTAUFNEHMER OHG
Germany
(Product discontinued. Replaced by series TH1). Absolute rod style position transducer for integration in cylinders especially for mobile applications ; NOVOSTRICTIVE non-contacting, magnetostrictive measurement principle; non-contact position detection with ring position marker; unlimited mechanical life span
Request for a quotePRESSTECK S.P.A.
Germany
We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm.Pharmaceutical and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 728 2/2-way metal ball valve is motorized. It has a plastic actuator housing. A manual override and an optical position indicator are integrated as standard. The seat is made of PTFE. — High flow rates — Full-flow bore
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
Fluorine contained resin packing seal and perfluoroelastomer packing seal are used to reduce required connection load and to achieve tight sealing. The material of body and spring are of stainless steel (SUS304), while that of valve is of fluorine contained resin. The combination shows excellent performance with various types of chemicals. Body (SUS304) is electropolished for enhanced corrosion resistance. Flanged body makes it easy to operate even with gloves.
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
haacon hebetechnik gmbh expands its standard range to include rack and pinion winches with fastening lugs for wall mounting. The serial drive type is a spring-loaded safety crank (SiFeKu), which holds the load in any desired position under tensile and compressive loading. The winch can be utilised in any position. The winches are produced in three load classes: 1.5 t 3 t 5 t. The robust design with milled gear rack and hardened gear components is suitable for use in harsh applications. The crank handle can be moved for space efficiency. Special designs with other rack and pinion lengths, detachable crank design, assembled fastening options can be supplied at short notice.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NEUGART GMBH
Germany
There’s no such thing as too short: The PLFE is our planetary gearbox with compact flange output shaft. You save more than a third of the space and benefit from a torsional stiffness that is five times higher than conventional products. Due to its standardized flange interface, it is especially easy to install. The integrated dowel hole provides additional secureness during fitting.
Request for a quoteNEUGART GMBH
Germany
The integrated gearbox/pinion combination provides the best technical coordination for rack and pinion drives. Numerous solution options provide high dynamics and high load-bearing capacities at the same time because of the precision gearing Our WPSFN is extremely light and easy to integrate thanks to its standardized flange interface. It achieves optimized synchronization with the spiral gearing and the helical-toothed planetary stage for the best surface qualities. The shortest right angle precision gearbox with integrated hollow shaft provides you with new structural solutions.
Request for a quoteNEUGART GMBH
Germany
The integrated gearbox/pinion combination provides the best technical coordination for rack and pinion drives. Numerous solution options provide high dynamics and high load-bearing capacities at the same time because of the precision gearing The PFHE represents an economically attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed inclined roller bearings and a flanged output shaft in accordance with EN ISO 9409-1 gives the PFHE a very high load capacity. Thanks to the radial shaft seal that is used, this gearbox achieves protection class IP65 at the output side and can therefore also withstand adverse usage conditions.
Request for a quoteNEUGART GMBH
Germany
The integrated gearbox/pinion combination provides the best technical coordination for rack and pinion drives. Numerous solution options provide high dynamics and high load-bearing capacities at the same time because of the precision gearing. Our PLFN features a standardized flange interface for ease of installation. The straight-teeth precision planetary gearbox has been designed for the highest performance and torque. Its high tilting moment delivers the best performance even under the highest radial and axial forces.
Request for a quoteNEUGART GMBH
Germany
The integrated gearbox/pinion combination provides the best technical coordination for rack and pinion drives. Numerous solution options provide high dynamics and high load-bearing capacities at the same time because of the precision gearing Our WPSFN is extremely light and easy to integrate thanks to its standardized flange interface. It achieves optimized synchronization with the spiral gearing and the helical-toothed planetary stage for the best surface qualities. The shortest right angle precision gearbox with integrated hollow shaft provides you with new structural solutions.
Request for a quoteNEUGART GMBH
Germany
Our PLFN features a standardized flange interface for ease of installation. The straight-teeth precision planetary gearbox has been designed for the highest performance and torque. Its high tilting moment delivers the best performance even under the highest radial and axial forces.
Request for a quoteNEUGART GMBH
Germany
Thanks to its standardized flange interface, our PSFN can be installed easily and reliably. Our Neugart-designed helical teeth makes additional noise absorption measures absolute. Thanks to its high tilting moment, you may demand the utmost from this precision planetary gearbox.
Request for a quoteNEUGART GMBH
Germany
The shortest right angle planetary gearbox with flange output shaft and maximum torsional stiffness. Thinking around corners even in tight spaces. The WPLFE is our right angle planetary gearbox with compact flange output shaft. You save up to 30% more space and benefit from torsional stiffness that is five times higher than conventional products. Thanks to its standardized flange interface, it's especially easy to install. The integrated dowel hole provides additional secureness during fitting.
Request for a quoteNEUGART GMBH
Germany
The integrated gearbox/pinion combination provides the best technical coordination for rack and pinion drives. Numerous solution options provide high dynamics and high load-bearing capacities at the same time because of the precision gearing. Thanks to its standardized flange interface, our PSFN can be installed easily and reliably. Our Neugart-designed helical teeth makes additional noise absorption measures absolute. Thanks to its high tilting moment, you may demand the utmost from this precision planetary gearbox.
Request for a quoteNEUGART GMBH
Germany
The PFHE represents an economically attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed inclined roller bearings and a flanged output shaft in accordance with EN ISO 9409-1 gives the PFHE a very high load capacity. Thanks to the radial shaft seal that is used, this gearbox achieves protection class IP65 at the output side and can therefore also withstand adverse usage conditions.
Request for a quoteResults for
Flanges - Import exportNumber of results
29 ProductsCompany type
Category