Results for
TOX-DÜBEL-TECHNIK GMBH
Germany
Features • TOX patent: Processing possible without pre-drilling or special tools • Effectively prevents thermal bridges • No pressure load on the facade • Fast processing and immediately loadable • Reinforced wall plug neck prevents possible twisting off • 100% nylon Description & Area of Application • Insulation wall plug with coarse, conical thread and flat head drive TX40 • Holder for chipboard screw Ø 4.5 - 5.0 mm • Wide range of lengths
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Just knock in: simple and fast • For wood components • Impact lock prevents premature spreading • Buttress thread • Fast and economical push-through installation • Nail screw can be easily screwed in and out as required Description & Area of Application • 2-way split spreader element with impact lock • Countersunk head • Pre-assembled, galvanized nail screw with buttress thread • Countersunk head and PZ drive
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Without pre-drilling in gypsum plasterboard • Screw in directly • No special tool required • In gypsum fibreboards high holding values up to 20 kg per fixing point • Also suitable for M4 screws Description & Area of Application • Metal wall plug (zinc die-cast) with drill tip and pronounced external thread • Also suitable for double-layer gypsum plasterboard • PH2 driver for easy installation • Spiral Plus + Screw: Screw with PH2 driver
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Special quick release fastenings for body parts and covers
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
Considerable reductions in time and money can be made by using LocTec® lock fasteners to create lock fastenings. The screw is simply screwed in using the special locking bit - job done. There's no need for any further locking measure - such as driving in steel balls, or using breakaway elements. The special flank geometry on the screw drive allows the screw only to penetrate inwards. Any attempt to drive it out, even using the locking bit that was used to fit it, will result in the fitting tool being automatically driven out. It means that the fastening can be undone only by mechanically adapting the screw head.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
The trend – particularly in the automotive industry – is towards lightweight materials. Aluminium and magnesium alloys are in increasing use in many fields of technology. So fastening technology needs to adapt too. Aluminium offers countless options because the material is so versatile for cold forming. Under the Alufast® name ARNOLD UMFORMTECHNIK has brought together screw fasteners and form parts made from aluminium. Our many years of experience working with aluminium, including extensive research are your guarantee of optimum fastening results. We are constantly optimising our processes, ensuring that our Alufast® products are always at the latest state of technology.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
Time and again, our systematic research and development work results in multi-functional fasteners that, because of their shape, are able to combine two or more functions. Some examples of multi-functional combinations: joining and sealing and decoupling joining and bearing and drive with articulated joint receptacle with shear-off element
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
The requirements of modern screwdriving systems are becoming increasingly complex. Besides achieving the best possible seat for the tool, the most important criteria for driving tools are service life and torsional stability. The TORX PLUS® provides enormous advantages. TORX PLUS® provides these advantages, due to the following design characteristics: The actual working angle is 0° Larger cross-section on cam faces Lower chamfering on application of force Where TORX PLUS® drivers are used the head height can be minimised, thus reducing the overall weight of the component. This is made possible with the improved force application process, which ensures decreased penetration depth.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
Toothing is a frequent design element. They are complex in geometry, and their manufacture requires heavy machine use. Previously, toothed parts were mainly manufactured in a cutting process with a finishing process that followed the heat treatment stage. But we produce toothed parts in a cold-form process, thus providing the following benefits: customer-specific external geometries greater endurance strength greater mechanical load resistance press-smooth surfaces high accuracy of shape and position saving on materials
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
Lightweight structures in the automobile industry demand savings in materials and weight, while using materials and components with high load capacities. Plastic-moulded bushes take account of this development. They reinforce the plastic, make weak points for load-bearing functional elements and receive the pre-load forces of screw fastenings. The use of aluminium bushes saves even more weight, providing sophisticated solutions when combined with TAPTITE 2000® thread-rolling screws. Conform® bushes indicate high accuracy in length and diameter.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
Every day, industries throughout the world encounter assembly problems caused by cross-threading. Cross-threading occurs when the screw is misaligned into the female thread. This creates a new thread, which destroys the female thread. Now Arnold UMFORMTECHNIK is able to supply the patented MAThread® dog-point, an innovative solution to this problem. Screws with MAThread® dog points are shorter, lighter and can be used in more applications than other special fasteners. They are easy to fit, and robust, and thus eliminate every problem that commonly occurs with regard to fitting threaded fasteners. The MAThread design allows the designer to select the point shape best-suited to feed well in the application. As the threads come into contact, the patented anti-cross thread MAThread design begins to cam over the female thread. The MAThread design now forces the two thread helixes to align every time without fail.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
With Conform® components our customers can reduce their procurement and assembly costs: We handle the preceding processes thus enabling slimmer procedures at our customers’ own production facilities. So that we can meet the wide variety of component needs for our customers, we work within a network of certified partners. Some examples of components made to customer specifications: cold-formed parts in steel cold-formed parts in aluminium rubber decoupling elements plastic injection-mouldings stampings metal bending parts non-detachable washers or sealing rings
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
Base surfaces Standard surfaces can be applied at our in-house electro-plating unit. We also make use of a network of outstanding industry partners able to apply the best surface for every application. Zinc-galvanised with various passivations (CrVI-free) Zinc-nickel-galvanised with various passivations (CrVI-free) Zinc flake coatings for various standard product families Phosphate coatings Further base surfaces on request Topcoats ARNOLD UMFORMTECHNIK GmbH & Co. supplies various organic and inorganic topcoats, seals and low-friction coatings. The appropriate products for the galvanised surfaces or zinc flake coatings can be selected from very many options in the range. Low-friction coatings Seals Seals with integral lubricant Organic and inorganic coatings (different colours on request) The low-friction coatings meet the VDA 235-104 friction coefficient requirements – total µ of 0.09 to 0.14. Further friction value ranges can be adapted on request.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
As a general rule, aluminium inserts are mainly used for joining plastics. They are used to stiffen components (tube supports) or as the counterpart to a direct fastening. With the appropriate choice of geometry and alloy they obtain outstanding fastening results. The benefits of aluminium inserts as metal-metal fastenings become evident, particularly for components that are subject to vibration stress or where operating temperatures are high. lightweight flexible durable stable environmentally friendly corrosion resistant The benefits of a trilobular cross-section approx. 35 % greater torsional torques compared with round-knurled inserts greater vibration resistance permits greater core hole tolerances when press-fitting
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
TriPress® is a triangular rapid fastening system that can be clinched into plastic and light metals. During the clinching operation, the two components of the TriPress® fastener connect together quickly and economically. It is available in the following designs: Triangular shank and knurl parallel with axis provide greater torsional strength. Circumferential locking flutes on triangular shaft generate high pull-out resistance. Combination of grooves and knurls permit positive-fit fastenings and achieve high torsional torques and pull-out forces (figure 4). So the fastener can be clinched into pre-prepared holes or injected as inserts into plastic housings.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
By using REMFORM® screws to join synthetic materials, the cost of the inserts and the associated work step can be omitted in the injection process. The screw simply screws into an existing core hole, forming its own thread as it goes in. The asymmetric thread geometry of the REMFORM® screw ensures that the synthetic material flows towards the load flank as the thread is formed. Thus: low turning torques high vibration resistance low cracking risk high assembly reliability Additionally: The radial force offset to the radius enables a much higher tightening torque simultaneous with a smaller tube geometry. Result: much higher clamping force. Your commercial benefits: The overall cost of fastenings is reduced by up to 72%.
Request for a quoteARNOLD UMFORMTECHNIK GMBH & CO. KG
Germany
How the fastener functions The material is peeled and a collar formed so that a flush and positive fit of the fastener is created with the sheet metal material. This can either transfer very high forces (e.g. AX 20x14) or with the version that is flush with the sheet, the fastener can be used to directly mount connected parts (e.g. AX 16x4). This principle can be applied to almost every material. The benefits of the RIVORM® HR clinch nut one nut for all sheet metals up to 4.5 mm cost-saving due to fewer variants high-strength, press-hardened and hot-stamped steels very good torsional strength regardless of metal strength high pull-out force The benefits of the RIVORM® TR rivet for fitting ties and springs fully automated processing possible in the subsequent composite tool can be applied universally for different assembly jobs, such as fastening electrical control units, or other plastic parts, simply by clipping them in
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KEBA FASTENINGS
Germany
All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Quick processing with mounting pliers (can also be mounted without) • For shallow cavity depths • Wall plug cap with anti-rotation lock prevents rotation in the building material • Suitable for single and double layer wall panels Description & Area of Application • Galvanised metal cavity wall plug with wall plug cap, rotation locks and metric screw with hexagonal (SW13) or crosshead driver • When the wall plug is put in place, the expansion segments are widespread on the rear of the panel • Fire resistant to DIN 4102 (class A1)
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • All-purpose for almost all building materials • Approved by the building authorities • Also approved for the fastening of ceiling substructures • 70 mm anchoring depth for secure hold in perforated brick • Fire resistance class R90 (in concrete) • Optimised spreading geometry • Can be processed down to -20°C • Also suitable for natural stone with dense structure • Countersunk screw with internal driver TX40 for flush installations Description & Area of Application • 2-way split spreader element with rotation lock • For fastening facade and roof substructures, doors, windows, etc. • The Fassad is supplied as a fastening kit with screw
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Continuous installation without readjustments of the screw • Rapid and convenient installation of the Acrobat • Short construction for narrow spaces • Comfortable handle for pleasant and safe working Description & Area of Application • For fastening the Acrobat • Metal mounting pliers, with head and two handles with slip protection • Enlarged screw holder for all sizes M4 to M8
Request for a quoteKEBA FASTENINGS
Germany
are designed for optimal joint performance with lower in-place fastening costs. Trilobular thread shape Improves and expedites thread engagement and the initial thread forming Resists loosening caused by vibrations Provides a higher uniform drive Prevents internal thread stripping
Request for a quoteKEBA FASTENINGS
Germany
PRODUCTION CAPABILITIES KEBA Fastenings’ processing capacity for Turned-Parts comprised of steel, brass, aluminum, and stainless steel bars ranges between Ø 1mm to Ø 60mm via CNC Auto Lathe, Index, and Sliding Automat machinery. The manufacturing technology and team capabilities allow for custom made parts according to customer-specific drawings. SURFACE TREATMENT • Browning • Anodised • KTL • Zinc - Lamella • Galvanized (blue, yellow, black) • Zinc - Iron • Zinc - Nickle Powder • Phosphating • Chrome • Copper
Request for a quoteKEBA FASTENINGS
Germany
K-TITE high-performance thread rolling fasteners are specially designed to lower your in-place fastening costs. K-TITE fasteners form internal threads into plain holes in ductile materials upon initial installation, which: • Eliminates the need to pre-tap the nut member • Reduces problems associated with assembling screws and bolts into pre-tapped holes, such as cross-threading
Request for a quoteKEBA FASTENINGS
Germany
Diameter range of M 12 - M 80 with lengths reaching up to 800 mm. Tailored manufacturing according to specific standards, drawings, and samples. KEBA Fasteners can be coated according to your requirements such as galvanized, phosphatized, or hard chrome plated. Chrome VI free coatings for the automotive industry (e.g. Geomet Plus, Delta-Protect) is also available. Reduced-shaft bolts, pan head screws, square head bolts, fit-bolts, hexagon head bolts, hexagon socket head cap screws, wheel bolts, bearing bolts, threaded bolts, clevis pins with head and many more which can be tailored to customer specifications according to the model or drawing and many more which can be tailored to customer specifications according to the model or drawing.
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Tension- and pressure-resistant fastening • No backing or wedging of the frame necessary • Corrosion protection due to aluminium-zinc coating • Fire resistant to DIN 4102 (class A1) Description & Area of Application • Galvanized metal frame wall plug, pre-assembled with metric countersunk screw M6 (driver PZ3) • Fire resistant to DIN 4102 (class A1) • Tension- and pressure-resistant fastening • Tightening the screw pulls the cone into the sleeve and spreads it open
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Heavy-duty spacer installation for ETICS, clinker or on flat roofs • Aqua-Stop effectively protects against rotting of the facade due to moisture • Stainless steel prevents unsightly rust stains • Approved by the building authorities • Practically no energy loss • Simple and rapid installation • Smoothly adjustable insulating sleeve Iso Spacer • Suitable for insulation thicknesses and spacer installations up to 200/300 mm Description & Area of Application Thermo Proof is a heavy-duty spaced mounting system for thermally-insulated facades (ETICS) consisting of: • Iso Spacer with large contact surface and SW24 driver for better force transmission • Aqua-Stop special sealant for exterior use; incl. dosing tip; content 80ml; transparent colour • Steel parts made of stainless steel in A4 quality; M12 thread; length 300/400 mm • Static mixer extension for deep drill holes
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Earthquake tested C1 and C2 • Fire resistance class R120 • Approved by the building authorities • Impact protection protects the thread • Immediately load-bearing • Extreme hold • Setting depth marking for visual inspection of installation Description & Area of Application • Galvanised bolt anchor, washer and hexagonal nut • Torque-controlled wall plug • Small axis and edge distances for near-edge fastenings and small anchor plates • Secure adherence to the required setting depth due to setting depth marking
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Anti-Slip System N is used on roofs with 15 - 45° roof pitch, if needed in combination with Optigrün Fastening Profile.
Request for a quoteResults for
Fastening - Import exportNumber of results
64 ProductsCompany type
Category