Electronics - Import export

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of acids. * Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

incremental Profile MA48: low-cost electronic display LCD with high contrast, 12-digit, dot matrix For incremental measuring systems Freely programmable via front keyboard

Incremental, length and angle measurement Profile MA55: LED display (1 line of 5 digits) Input for incremental encoder recognition of the counting direction for length and angle measurement Free programming via front keyboard Non-volatile parameter storage (EEPROM) With reference connection Integrated quadruple evaluation of counting pulses Compact design

Analog, length and angle measurement Profile MA50: LED display (1 line of 4 digits) Voltage, current and resistor inputs for length and angle measurement Free programming via front keyboard Non-volatile parameter storage (EEPROM) 2 switching outputs (limit-dependent, programmable) Compact design

Application: Motor Management Electronic pedal sensor modules comprise of an accelerator pedal, angle sensor, and mechanics for simulating the driver's traditional sense of the accelerator pedal. When the accelerator pedal is pressed down, the pedal sensor transmits information to the control electronics. Based on this information, the position of the throttle valve is calculated. Automotive-Applications.pdf For more information please contact: automotive@novotechnik.de, +49 711 4489-222

Switch probes are contact probes with integrated switch function, that opens or closes after a certain travel. This is very useful for testing the presence or exact position of a component or a connector element.

Pogo connectors are used for charging purposes or for signal transmission between detachable devices or within products.

A special probe design allows contacting with very high currents and very low contact resistances. Additional functions like temperature sensors or sense pins can be integrated, even at limited space.

Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability. Resolution 0,1µm or 0,5µm Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software included

Read head for magnetic tape scale SL710/720/730 Pl101-R/RH: 1Vpp interface PL101-RA/RHA: TTL line driver interface (RS422) PL101-RM/RHM/RP/RHP/RY/RHY: with serial interface from Mitsubishi (M), Panasonic (P) or Yaskawa (Y) Max. Response speed: 6.4m/s with 1Vpp Max. Resolution: 0.2µm with TTL (phase to phase) Easy installation Protection class: IP67 (RH version), IP50 (R version) Resistant to oil, dirt, vibration and shock

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Incremental measurement and calibration function. Direct reference/offset value input. Calibration input. Works with sensor MSA.

Large variety of contact probes (pogo pins) for contacting PCBs even at difficult contacting conditions, different sizes, tip styles and spring forces available.

The AP05 position indicator guides the user intuitively to the correct machine setting in the case of product or format change. The optimized backlit display indicates target values and actual values straight to the point. Two LEDs show the machine operator precisely the direction whereto the adjustment is to be performed.The AP05 helps avoid wrong machine settings and enhances process safety of flexible production machines.  Electronic position indicator with bus interface. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. User guidance through status LEDs. Hollow shaft with  Ø 20 mm and clamping ring made of stainless steel. Enhanced shock resistance owing to protective display glass. Integrated RS485 interface, CAN bus as an option. Robust sensor technology unit thanks to magnetic scanning. Mechanically compatible with the AP04 and DA04 position indicators. IP53 type of protection, IP65 as an option.

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position. Freely programmable electronic digital display for length or angular measurement. Freely programmable via the ProToolDE programming software. Hollow shaft, max. Ø 14 mm. LCD display with 5 digits and special characters. Digit height approx. 8 mm. Reset, incremental measurement, offset via keyboard. Long battery life. Easy battery change without dismantling of the device.

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position. Freely programmable electronic digital display for length or angular measurement. Freely programmable via the ProToolDE programming software. Hollow shaft, max. Ø 30 mm. LCD display with 5 digits and special characters. Digit height approx. 12 mm. Reset, incremental measurement, offset via keyboard. Long battery life. Easy battery change without dismantling of the device.

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading poisition. Freely programmable directly via buttons on the device. Hollow shaft, max. Ø 30 mm. Stainless-steel hollow shaft. LCD display with 6 digits and special characters. Digit height approx. 11 mm. Long battery life. Easily replaceable batteries (standard AAA). Incremental measurement function, absolute value display. High degree of protection.

Low-cost, freely programmable measurement display for the indication of incremental position values. The alpha-numeric display enables the precise representation of measured values as well as the freely selectable representation of length and angle units. Low-cost electronic display. LCD with high contrast, 12-digit, dot matrix. For incremental measuring systems. Freely programmable via front keyboard.

Freely programmable, compact measurement display. Optionally, the positions of incremental measurement systems or rotary speeds as well as number of pieces can be displayed combined with commercially available initiators or light barriers. Incremental, length, angle, rotational speed or number of pieces measurement. LED display (1 line of 5 digits). Inputs for incremental sensors, length and angle measurement, rotational speed or number of pieces. Free programming via front keyboard. Incremental measurement function (operating mode I), actual value memory (operating modes I and S). With reference connection. Programming enabled via external input (keyswitch). Compact design.

Freely programmable measurement display for the representation of incremental and absolute position values. The alpha-numeric display enables the precise representation of measured values as well as the freely selectable representation of length and angle units. High-contrast LCD (1 line of 12 digits). Display of units. Inputs for incremental or absolute encoder (SSI),. Free programming via front keyboard. With reference connection. Option: RS232 or RS485 interface. Option: Switching outputs.

Display accuracy max. 1 μm. Repeat accuracy max. ±1 μm. High-contrast LCD, 12-digit LCD dot matrix. Incremental measurement and reset function. Direct reference/offset value input. Reference input. Works with sensor MS100/1. Option: serial interface RS232/RS485/switching output. Option: TG01 bench housing.

Max. display accuracy 10 μm or 1/64 inch. Repeat accuracy max. ±0.01 mm. Low-power LCD with decimal and fraction-inch function. Reading distance ≤2 mm. Incremental measurement and reset function. Direct reference/offset value input. Battery-buffered memory. Battery operation. MS500H sensor pluggable.

Display accuracy max. 10 μm or 1/64 inch. Repeat accuracy max. ±0.01 mm. Low-power LCD with decimal and fraction-inch function. Reading distance ≤2 mm. Battery-buffered memory. Battery operation. Works with receiver module RTX500.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Freely programmable high-resolution LCD dot matrix display. Battery-buffered memory. Hard-wired sensor. Option: serial RS485 interface.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Lowest-power LCD. Metric or decimal-inch indication. Incremental measurement and reset function. Direct reference/offset value input. Battery-buffered memory. Battery operation. MS500H sensor pluggable.

Magnetic display MA508SG. Measurement lengths up to 2000 mm. Resolution of 0.1 mm. Maintenance-free backup battery. Long battery life. Easy mounting. Compact design.

4-row, 7 digits and backlit LCD. Up to three incremental measuring systems. Parameter setting with 4 keys and dial. Each axis is individually programmable. Connection for pluggable magnetic sensors MS100/1 or MS500. System accuracy up to 10 μm. Resolution 1 μm with MS100/1. Speed input measurement as an option. Two accuracy classes: 0.01 mm with magnetic sensor MS100 / 1 or 0.05 mm with magnetic sensor MS500.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. High-contrast LCD, 12-digit LCD dot matrix. Incremental measurement and reset function. Direct reference/offset value input. Reference input. Programmable actual-value memory. Works with sensor MS500. Option: serial interface RS232/RS485. Option: 2 measurement channels. Option: TG01 bench housing.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. High-contrast LCD, 12-digit LCD dot matrix. Incremental measurement and calibration function. Direct reference/offset value input. Calibration input. Works with sensor MSA. Option: serial interface RS232/RS485. Option: TG01 bench housing.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Incremental measurement and reset function. Direct reference/offset value input. Reference input. Works with sensor MS500.