Electronic indicators - Import export

Technical information Measurement device for precise, quick measurement and monitoring of the crimping depth. Electronic indicator with absolute capacitive gage. One-time zero-point adjustment, which stores the zero-point until the next battery change. Easy reading due to a large display. The indicator will be delivered with a solid Z+F holding unit, which has an integrated magnet. This ensures a safe fixture on any suitable surface.

The bus-compatible AP10 position indicator serves for monitored format adjustment in order to reduce setup times and enhance machine efficiency.Readability has been optimized to achieve intuitive user guidance. The backlit display clearly indicates target and actual values  two-row position indicator for representing target and actual values and the two LEDs clearly show the direction to be set.  Electronic position indicator with bus interface. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus or IO-Link as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S position indicator. IP53 type of protection, IP65 as an option.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual iinear or slider adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Electronic position indicator with plug connection for magnetic sensor. Integrated Industrial-Ethernet-Fieldbus. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Display accuracy up to 0.01 mm. Absolute function via internal backup. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. IP53 type of protection, IP65 as an option.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual machine adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Integrated Industrial-Ethernet-Fieldbus.Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S and AP10 position indicators. IP53 type of protection, IP65 as an option

The AP05 position indicator guides the user intuitively to the correct machine setting in the case of product or format change. The optimized backlit display indicates target values and actual values straight to the point. Two LEDs show the machine operator precisely the direction whereto the adjustment is to be performed.The AP05 helps avoid wrong machine settings and enhances process safety of flexible production machines.  Electronic position indicator with bus interface. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. User guidance through status LEDs. Hollow shaft with  Ø 20 mm and clamping ring made of stainless steel. Enhanced shock resistance owing to protective display glass. Integrated RS485 interface, CAN bus as an option. Robust sensor technology unit thanks to magnetic scanning. Mechanically compatible with the AP04 and DA04 position indicators. IP53 type of protection, IP65 as an option.

Bus-compatible position indicator with two-row LCD display for indicating target and actual values. With  additional status LED for clear indication of the positioning status. Serves for monitored format adjustment aiming at reducing setup times and increasing machine efficiency. Electronic position indicator with plug connection for magnetic sensor. Optimally readable backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus as an option. Display accuracy up to 0.01 mm. Absolute function via internal backup. User guidance via bicolor status LEDs. IP53 type of protection, IP65 as an option.

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading poisition. Freely programmable directly via buttons on the device. Hollow shaft, max. Ø 30 mm. Stainless-steel hollow shaft. LCD display with 6 digits and special characters. Digit height approx. 11 mm. Long battery life. Easily replaceable batteries (standard AAA). Incremental measurement function, absolute value display. High degree of protection.

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position. Freely programmable electronic digital display for length or angular measurement. Freely programmable via the ProToolDE programming software. Hollow shaft, max. Ø 30 mm. LCD display with 5 digits and special characters. Digit height approx. 12 mm. Reset, incremental measurement, offset via keyboard. Long battery life. Easy battery change without dismantling of the device.

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position. Freely programmable electronic digital display for length or angular measurement. Freely programmable via the ProToolDE programming software. Hollow shaft, max. Ø 14 mm. LCD display with 5 digits and special characters. Digit height approx. 8 mm. Reset, incremental measurement, offset via keyboard. Long battery life. Easy battery change without dismantling of the device.

With bus interface, for direct linear length measurement Profile AP04S: Electronic position indicator with plug connection for magnetic sensor Requires magnetic sensor MS500H and magnetic tape MB500/1 Easily readable, two-line LCD for target and actual values integrated RS485 interface, CAN bus as an option Display accuracy up to 0.01 mm Absolute function via internal backup User guidance via bicolor LED

With bus interface Profile AP04: Electronic position indicator with bus interface Compact design Hollow shaft, max. Ø 20 mm Easily readable, two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Robust sensor technology unit thanks to magnetic scanning User guidance via bicolor LED

With bus interface Profile AP10: Electronic position indicator with bus interface Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option Backlit display Two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Robust sensor technology unit thanks to magnetic scanning User guidance through status LEDs Mechanically compatible with the DA09S position indicator IP53 type of protection, IP65 as an option

Profile AP10S: Electronic position indicator with plug connection for magnetic sensor optimally readable backlit display Two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Display accuracy up to 0.01 mm Absolute function via internal backup user guidance via bicolor status LEDs IP53 type of protection, IP65 as an option

Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control

freely programmable Profile DE10P: Freely programmable directly via buttons on the device Hollow shaft, max. Ø 30 mm Stainless-steel hollow shaft LCD display with 6 digits and special characters Digit height approx. 11 mm Long battery life Easily replaceable batteries (standard AAA) Incremental measurement function, absolute value display high degree of protection

For large shaft diameters Profile DE10: Freely programmable electronic digital display for length or angular measurement Freely programmable via the ProToolDE programming software Hollow shaft, max. Ø 30 mm LCD display with 5 digits and special characters Digit height approx. 12 mm Reset, incremental measurement, offset via keyboard Long battery life Easy battery change without dismantling of the device

Freely programmable Profile DE04: Freely programmable electronic digital display for length or angular measurement Freely programmable via the ProToolDE programming software Hollow shaft, max. Ø 14 mm LCD display with 5 digits and special characters Digit height approx. 8 mm Reset, incremental measurement, offset via keyboard Long battery life Easy battery change without dismantling of the device

with bus interface, for format part or tool change Profile AP10T: setpoint display with bus interface without measurement of actual value large control key to confirm target value optimally readable backlit display Two-line LCD-Display integrated RS485 interface, CAN bus as an option user guidance via bicolor status LEDs IP53 type of protection, IP65 as an option

For connection of up to three DK probes with adapter cable CE29 or linear encoder. Equipped with RS-232C function as standard Peak value function, hold function Various input functions especially for automatic measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function

Reach for the stars! The innovative adjusting knob DKE01 combines a programmable electronic position indicator with a star grip or disk handwheel to offer a flexibly usable positioning unit. The indicated values can be configured application-specifically to cover the most varied areas of use with always the same basic device. Turning knob with integrated 5-digit LCD display. Digit height approx. 11,5 mm. Freely programmable via the ProToolDE programming software. Usable for length or angle measurement. Shaft accommodation: max. Ø 20 mm. Long battery life. With disk handwheel as an option.

Uncompromisingly fast and reliably effective Primarily designed for round pharmaceutical products, such as glass vials and the corresponding high batch sizes in the healthcare industry Wrap-around labeler 132M HC for healthcare products with a high-speed output of up to 400 products per minute High labeling speed with extreme precision thanks to the new HERMA 500, our high-performance applicator It is completely equipped for all healthcare tasks, including a selection of various printing and control systems, an patented automatic label return with cross check, as well as one of several possible product reject stations New innovative HERMA rotary tables, electronic position indicators and format sets that can be exchanged without tools for fast format changes ensure maximum overall equipment effectiveness The 132M HC can be easily configured for numerous industry applications - even without printers and control systems in the version 132M