Electronic components - Import export

Thanks to extremely compact design the overexcitation rectifier "Slim Collection" can be installed in very restricted space. The module features a central bore for screw fixing inside the terminal box. It can also be installed by using an adhesive pad.

These half-wave and bridge rectifiers are ideal for installation in the junction boxes of medium-power brake motors, brakes and solenoids. Accessories include flying leads and a range of mounting hardware so that installation on DIN rails is also possible. Encapsulated versions for an extended operating temperature range are available as options. In case of additional DC side fast turn-off, the induction voltage generated by inductive loads is limited within the rectifier.

The rectifier with built-in current sensor for fast turn-off is designed for the operation of electromagnetic devices. It ensures fast turn-on and turn-off. The rectifier with bridge circuit comprises a thyristor and timer. During overexcitation, the rectifier delivers bridge rectified output voltage before changing over to half-wave rectification. On the DC side, the output voltage is enabled by the built-in current sensor which measures the AC current of the connected motor. If the motor is stopped, the rectifier turns off on the DC side as soon as the current falls below the turn-off threshold. The turn-off voltage generated by the inductive load is limited. The rectifier is suitable for connection in parallel with AC motors. The current sensor must be wired into the motor current path in such a way that the current flow created when the motor operates in generator mode will not pass through the sensor. This is crucial to avoid delayed or impaired DC side switching.

These compact half-wave and bridge rectifiers are ideal for installation in space restricted junction boxes of brake motors. They can be delivered with flying leads or terminals for connection. Various accessories are available to meet different installation requirements.

ESM for AC-brakes: The module consists of a time-controlled rectifier with integral electronic fast turn-off. During start-up, the ESM delivers bridge-rectified output voltage before changing over to half-wave rectification. The built-in voltage sensor ensures that the DC side output voltage is interrupted electronically when AC input voltage is removed. Thanks to its compact design, the ESM can be installed in very restricted space. ESM for DC-brakes: The module keeps the voltage supplied to the electromagnetic device at a constant level over a wide input voltage and temperature range. Full operating voltage is applied to ensure fast switching when the load is switched on. The module then reduces the power supply to constant holding voltage. A 30% reduction provides power savings of 50%. The ESM is very compact thanks to the use of state-of-the-art microelectronic and power electronic components. Overexcitation time and holding voltage can be factory-programmed to customer demands.

These overexcitation rectifiers are designed to increase the attractive force and reduce the attraction time of actuating solenoids, to shorten the coupling and disconnection times of clutches and brakes and to decrease the power consumption of clutches, brakes and actuating solenoids. To increase the attractive force, the solenoid is overexcited during the overexcitation time, applying bridge rectified voltage. Then the rectifier changes over to the selected holding voltage which must not exceed the rated voltage of the solenoid.

Motorized rope winches, serial production and on request. Cable winches tailored to your individual requirements. Electric, hydraulic und pneumatic cable winches tailored to your individual requirements.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Discharging bar R50/R51A achieves a significantly higher active discharge power than previous discharging technologies. The isolated arrangement of the grounding conductors strengthens the E-field at the active tips, thus contributing to the increased production and speed of load carriers. As a result, significantly more positive ions and free negative electrodes are available than in conventional bars. The bars also feature a high passive discharging power. Resistivity-decoupled tips ensure good discharge and make the bar absolutely short-circuit-proof and protected against contact.

The high-performance discharge power supply POWER IONIZER impresses with its flexibility. The simple operation, the LED display for visualization of the current values and the integrated function and malfunction monitoring characterize the power supply unit. The POWER IONIZER can be operated with the Eltex AC discharging bars, ion blower nozzles and ion blower pistols. Lowest residual charges can be achieved by different adjustable parameters. Operation is possible as single unit or in a network.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The ES51 features 5 plug-type high voltage outputs, stable 5 kV AC output voltage, small dimensions, easy installation, solid design with protection class IP 54, function and malfunction monitoring of the bars with floating signal contacts (optional).

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Compared to similar products, the ion blowing technology features longer ionization range as well as ionization performance that is many times higher. While the ion blower nozzles and the ion blower nozzle carrier are permanent installations, the ion blower pistols show their strengths in hand-operated use. All ion blowers discharge and remove dust from highly sensitive components. The emission tips enveloped by the airflow generate a discharge cloud enriched with ions.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Ion blowing devices for discharge and dust removal from highly sensitive components. Emission peaks enveloped by the air stream create an ion-dense discharge cloud. Available as a flat jet / round jet / spot jet or compact flat jet nozzle, as a pistol or as the LR36 nozzle carrier.

Electrostatic Innovations from Eltex have been creating safety in hazardous areas for over 60 years: Controlled electrostatic grounding protects production sites and employees when handling highly flammable and explosive substances. During filling or decanting processes involving potentially explosive liquids or materials, the Eltex Terracompact II automatically identifies faulty, disrupted or defective ground links in the installation. Any disruption in the ground links results in an automatic shutdown of the process. The Terracompact II is a standard enclosure for mounting on DIN 46277 top-hat rails for installation in a control cabinet or a control room.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. RG52 series discharging bars are available for passive charging of electrostatic interference during production. They are ideal for discharging moving surfaces, especially metalized film or composite materials with metalized layers that do not permit the use of active discharge systems.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The EXR5C discharging bar is primarily used in applications where interfering electrostatic discharge on quick-moving materials affects the production process and therefore has to be eliminated. The bar is approved for use in potentially explosive atmospheres. It features a high discharge range and large depth effect, in addition to high active discharge power thanks to an isolated grounding conductor and safety thanks to passive discharge power when power supply units are disconnected.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. R45 discharging bars for actively discharging electrostatic interference during the production process. The bars are operated with an AC voltage of 5 or 6 kV at 50 to 60 Hz and are suitable for the discharge of moving surfaces. A high discharging range as well as a large depth effect thanks to the patented isolated grounding conductor.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The discharging bar with a freestanding spring tip achieves excellent passive discharging at low and maximum speeds even at a low level of high voltage AC. The special feature here is that the constant discharge power ranges from short distances to never reached ranges at lowest air consumption. It is exactly this wide-ranging performance that characterizes the flexION R60/flexION air R60L as the only discharging bar in the world that can be used in different geometric situations – even in narrow, grounded machine environments. The integrated air duct at flexION air serves to increase the range and also for continuous cleaning of the emission tip.

During printing and coating processes, so-called ink mist or particle mist arise in the outlet of doubleroll systems. This unwanted particle deposit results in lower product quality, high maintenance costs, increased ink consumption and the contamination of the environment. The formation of ink mist is very noticeable and annoying, particularly during coating and printing processes on substrates with non-absorbent surfaces (films, metalized substrates or composite films). A patented double-row DC plasma electrode is used to prevent this ink mist. This plasma electrode acts separately on both particle streams and ensures an optimal particle deposit. The electrode will be connected to the high voltage generator HSG61. The MISTING TACKER system is currently used for printing on metalized films and in silicone coating units (Wifag-Polytype).

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our product portfolio for cleaning with ionized air you will discover systems and products for many industrial sectors. Ion blower technology is characterized by much higher ionization power and a larger ionization range. Ion blower pistols shine in manual applications with a fixed installation of the ion blower nozzles and ion blower nozzle carriers. The compact design and high efficiency enable a wide range of applications. Electrostatic charges occurring during production processes often cause severe disruptions, reducing production speed and product quality. The R55 ion blower head and the PR55 ion blower pistol are both components of the newly developed discharging system with ultimate depth effect; the blower head for fixed installation and the blower pistol for manual and mobile use.

Description In digital high speed printing, paper loses moisture during drying. The moisture loss leads to considerable quality and efficiency issues. Electrostatic remoistening increases the water content in the paper after drying, returning to the level required and thus improves quality and productivity throughout the entire process chain. The contactless remoistening system DIGIMOISTER 1500 can be installed in any new or existing digital high speed press. The pre-charging and the two-substance nozzle technology are patent protected. Advantages: Precise remoistening results at highest production speeds Flat books or signatures Less electrostatic charges on the paper Dimensional stability (no expansion) No broken fibers in the paper Operation: Intuitive operation via a user friendly touchscreen remote control Easy set-up of web width and water amount Low maintenance costs

Passive Eltex ground clamps from the 70 and the TERRACLAMP series make it easy to establish connections. The clamps are used when decanting or filling potentially explosive materials. Electrostatic charges are discharged effectively. Passive ground clamps from the TERRA-C/P, 70SG, 70PG, 70OK and 70PK series have extremely hard and sharp gripper jaws that can penetrate any coating. The clamps have a continuously high clamping force, which always ensures a secure connection to the potential equalization at all times. The TERRA-C/POS, 70SG and 70PK grounding clamps have a plug-in-connector for a simple connection to the passive grounding cable, spiral cable and rewinding cable reels.

Uncontrolled electrostatic discharges when handling highly flammable or explosive media often cause personal injuries and damage to equipment. With smaller containers such as drums, buckets and canisters, the risk of electrostatic sparks is often underestimated. For these simple, but no less dangerous processes, Eltex has developed the TERRALIGHT battery-operated ground monitoring system. The TERRALIGHT grounding system shows the user that a correct dissipative ground connection is present and thus ensures a high level of safety when handling highly flammable media. Mobile ground monitoring, e.g. on mobile suction/pumping stations or containers, is also possible. For a safe ground contact, the contactor/clamp is important as an interface between the grounding device and the object to be grounded. For the TERRALIGHT we offer the TERRACLAMP with built-in grounding indicator. The user can see directly on the clamp if the grounding has been done correctly

Electrostatic Innovations from Eltex have been creating safety in hazardous areas for over 60 years: Controlled electrostatic grounding protects production sites and employees when handling highly flammable and explosive substances. The TERRAPHARM grounding device combines proven TERRABOX technology with the specific material requirements of the pharmaceutical industry.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. A universal bar with minimal dimensions for supply voltages up to 60 kV. It is used to charge surfaces for blocking and tacking purposes. The charging bar is mainly used where production processes and cycles run faster and with less interference if the materials used (such as films, foils, papers, etc.) adhere to each other. The parallel configuration of two or more bars allows surface-covering charging or operating the unit at high web speeds.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. Heavy-duty precision bar for supply voltages up to 60 kV. The charge and field distribution have been substantially improved by the optimized arrangement of the individual bars. Separate current-limited tips prevent an increase in air ionization and high-energy brush discharges.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The BASIX discharge system consists of the R47 discharging bar and the ES47 power supply unit; these available items actively discharge electrostatic interference during production and are ideal for discharging moving surfaces. Because the materials have different surface charging profiles, the discharging bars feature charges of both polarities. Thanks to its compact dimensions, BASIX can be used for a variety of applications in the plastics, printing, packaging, textile and optics industries.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. In all situations where great or changing distances have to be bridged and very high electrostatic charges have to be dissipated, the latest Eltex innovation, the IONSTAR RX3 discharge bar, comes into its own. The intelligent sensor system of the Ionstar RX3 continuously detects the distance and the available charge of the object to be discharged and automatically adapts the output power to the existing conditions. The system offers excellent discharging options, such as those for reeler systems.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. The BASIX discharge system consists of the ES47 power supply unit and the R47 discharge bar; they are available for active discharge of electrostatic disturbances in the production process and are suitable for discharging moving surfaces. Due to different surface charge profiles on the materials, charges of both polarity are provided by the discharge bars. Due to its compact dimensions, BASIX is suitable for a wide range of applications in the plastics, printing, packaging, textile and optical industries.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. All Components such as power supply units, output stages and module technology are integrated into the lean electrode profile of the new Smart Discharging System SDS. This system’s communication with machine/operator networks or operation via mobile end devices is particularly smart. The Smart Discharging System SDS is ideal for discharging in the middle distance and speed range for applications in automation technology and in the plastics and packaging industry.