Drying - Import export

The relaxation dryer serves for the drying, relaxing and shrinking of knitted fabric in tubular and openwidth form but can be used also for the treatment of woven fabric. Residual shrinkage is reduced to a minimum and the fabric gets a very good dimensional stability across the length and width and a fleecy, soft and voluminous touch. Depending on the customer’s requests and the needed capacity, the dryer is available with one, two or three fabric passages. This dryer is mainly used to finish articles made of natural fibres such as cotton, viscose and wool but also of blends thereof or blends with elastane, polyamide or polyester. Such fabric qualities are mostly further processed for underwear (ribware), nightwear (Interlock), polo shirts (Piqué), Tshirts (single jersey) or sweat shirts (fleece or sweatware). The residual shrinkage is reduced to a minimum and the fabric gets a very good length and width stability and a fleecy, soft and voluminous handle.

The stenter is the heart of textile finishing. It develops more and more into a multipurpose line for the production of technical textiles and other webshaped materials. Several thousands of BRÜCKNER stenters are in use all around the globe. Every day they are stentering, drying, heatsetting, functionalizing and coating incountable meters of the most different fabric types. Since many decades BRÜCKNER stenters stand for highest quality and performance and are producing sustainably and energyefficiently. The most important benefits of these stenter frames are highest drying performance and process control matching any type of fabric due to the technically mature and proven splitflow air circulation system, very homogeneous air flow and temperature distribution due to alternately arranged thermo zones, very low specific energy consumption, extremely robust chains, chain rails, pin bar carriers and clips, needing only little maintenance.

Aluminum dry sump oil tanks can be dismantled and cleaned. Rotatable halves allow the connections to be rotated in the desired direction. Return and vent connections on the top of the tank. From 4.5 liters to 11 liters capacity.

Dry sump oil pumps in modular design with 1 to 4 chambers. Delivery rates on the pressure side are a maximum of 29 liters per minute. The suction side maximum 24 liters per minute. Suitable for engines with a capacity of 2 to 8 liters

The POWDRYER™ PD08 metal powder dryer is used to dry inorganic metal powder for the complex additive manufacturing (3D printing) process. It corrects the manufacturer’s fluctuating metal powder qualities, thus optimizing the metal powder’s flowability. It also reduces the number of air inclusions in finished workpieces. Significantly higher material densities are the result. Fields of application > Particularly for metal printing products where maximum strength is required > For the printing of alloys of aluminium, titanium, tool steel, etc. > Special tools for the metal-processing industry, machine and system engineering, prototype development, and more > Aviation, aerospace, and automotive industries, plus medical and dental technology

The Lutz-Jesco dry material feeders are precise and reliable devices for volumetric conveying of pourable substances. These devices consist of self-supporting welded constructions made of high-quality stainless steel sheet, which ensures their robustness and durability. Available in various conveying capacities, the dry material feeders offer flexible adaptation to different requirements and areas of application. They are equipped with hollow screws (screw spindles), which ensure even and continuous material transport. Thanks to this technology, they can feed a wide range of bulk materials, including fine dust particles, pellets, flakes and short fibres. Lutz-Jesco dry material feeders are ideal for industrial applications where precise dosing is required, such as in the chemical industry, food processing and many other sectors.

The SERVOLIFT drying station completes the cleaning steps in the SERVOLIFT semi-automatic wash station. The still-damp containers are placed in the drying station, which is placed in a separate drying area. The work is done nearby in the same room. The system can be used as a compact unit separated in an equipment area. The drying station takes up very little space. The complete system ensures a successful drying process in the shortest time with very low energy use. Fast and efficient Technical description Drying using air circulation with approximately 60% fresh air input Heat exchanger, electric, approx. 9KW Drying temperature up to 80° C Control - microcontroller with digital display Adapter for drums Vertical or horizontal construction

grease 800 is a H1 registred, high-performance grease with a soft consistency. The thickener of grease 800 is PTFE. Therefore, it provides excellent dry-running properties. The operating temperature range of grease 800 is between -30°C and +280°C, but should preferably be used at temperatures above 70°C, because from this point on the lubricant provides the best performance.

The hot filter press combines the standard process steps of a membrane filter press, (filtration, filter cake washing and squeezing), with the additional function of a thermal filter cake drying (TCD). As a result, all process steps are carried out in one plant, the hot filter press. Dewatering and drying of the resulting filter cake is thus done without a downstream drying process. Cost-intensive and time-consuming vacuum contact drying is therefore no longer necessary. FUNCTIONAL PRINCIPLE OF THE HOT FILTER PRESS – WITH THERMAL FILTER CAKE DRYING In contrast to the conventional method, the system consists of membrane filter plates and heat exchanger plates, which are installed alternately in a filter press. For thermal drying, hot steam and/or oil is applied to the working space behind the membrane and the filter cake is thermally dried accordingly. The advantage of this process is that a high dry matter content (DM content) of over 90% is achieved.

Name: Christoph Albrecht: Phone number: +49 178 6222033 Company name: New World Handel GmbH Premium wood Pellets,Hot Sales Quality Wood pellets for sale/Fir, Pine, Beech wood pellets in 15kg bags Wood pellets fuel is a limitless and environment friendly fuel source. It is a clean burning and cost stable home heating alternatives. To burn wood pellet is a good way to divert millions of tons of waste from landfills and timber industry and turn it into energy. Ash amount: 0.7% max Moisture: 10% max Diameter: 6 mm-8mm Length: 10mm-50mm Made from pure wood , no bark Bright, uniform surface color No horizontal or vertical cracks Density: 650kg/m3 min calorific value: 4100 to 4500 kcal/kg Uniform size: quality in production Clear in water cup test Non Toxic Fumes Zero Additive Package: 15KG/PP woven bag or 20KG/PP woven bag or as per customers choice with desired logo.

The desiccants of the Absorb Dry series are powerful and longlasting. They achieve 5 times more water absorption than bentonite or silica gel. The extremely rapid absorption of moisture ensures that ideal humidity is reached as quickly as possible. Water absorption five times higher than bentonite and silica gel Biodegradable in 36 months Different versions Costeffective The high water absorption capacity of 300% is unique and cannot be compared with other products available on the market . The capacity for traditional products that are used for container drying is around 150%. For ABSORB DRY I we only use foodsafe materials absorb moisture from the air. When water is absorbed, the powdery starting material turns into a gel. The special outer packaging made of nonwoven fabric prevents leakage.