Results for
BOLZ PROCESS TECHNOLOGY GMBH
Germany
COMBER Pressofiltro® / Turbodry® Series PF/TD 5 - PF/TD 100 This Pilot Plant can either be used as Agitated Nutsche Filter/Filter Dryer or a Vacuum Dryer. Designed for processes in pilot plants, it is fully equipped for tests and trials and can as well be used for small scale production. Special properties for the customer’s benefit: Calculation, manufacture and design are in accord with Pressure Equipment Directive 97/23/EG or/and ASME U-stamp as well as with cGMP and FDA guidelines Approved for using in ATEX danger zone, group II 2G 2D (zones 1/ 21) Suitable as vacuum dryer, filter dryer or agitated nutsche filter Shaft seal through gland nut Device built on skid Control system protected against explosion (EEx-d) Options Multilayer PLC-system
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
COMBER Pressofiltro® Series PF 50 - PF 6000 Steam Sterilizable Design COMBER Pressofiltro steam sterilizable agitated Nutsche filter dryers are designed to maintain full sterility during the entire process, from inerting through slurry feeding and filtration, washing and drying to discharge of the dry product. CIP and SIP provide a very effective, safe and convenient form of sterilization, easy to automate and validate. Special properties for the customer’s benefit: With Cleaning-In-Place (CIP) and Sterilization-In-Place (SIP) systems designed for the automatic cleaning and disinfecting of the equipment Steam sterilizable filter dryer design assures steam reaches all parts of the filter dryer in contact with the product and air is not trapped in the unit during sterilization In compliance with cGMP and FDA guidelines, with vessel interior and all associated piping designed to prevent product adherence and to facilitate cleanability, fully drainable for clearance of condensate...
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
COMBER Pressofiltro® Series PF 5 - PF 100 Pilot Plant Pressofiltro pilot units are multipurpose tools for pilot plant or laboratory applications as well as for small scale production facilities. Versatile use of the equipment, cGMP compliant design, containment, effcient and complete cleanability, complete dischargeability, highest drying effciency, process safety and monitoring, ease of validation and a compact design are important requirements. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also available in steam sterilizable and/ or aseptic designs Small pilot units are skid mounted including all drives, the required instrumentation and the hydraulics For easy access larger pilot units are mounted on a support column or post; the vessel base is mounted on a separate column to lower the base and displace it to the side Vessel base can be designed interchangeable for conversion to a conical bottom dryer or a Nutsche filter dryer...
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
COMBER Pressofiltro® - Series PF 2000 - PF 16000 Chemical design Chemical design Pressofiltro® agitated Nutsche filters, suction filters or filter dryers are versatile units equally suited for monoproduction applications and for multipurpose production facilities. Special properties for the customer’s benefit: Available as closed units with manhole access or with an openable filter base Multilayer and/ or conventional filter materials Good emptying characteristics due to narrow agitator to wall/ bottom clearances and a unique agitator blade design Shaft seal with externally accessible stuffing box
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
COMBER Pressofiltro® Series PF 100 - PF 10000 Pharmaceutical design COMBER Pressofiltro nutsche filters or filter dryers are versatile units designed for multipurpose production facilities. To meet the demanding requirements for filters used in the manufacture of pharmaceutical ingredients, the filters are designed to meet stringent cGMP and FDA guidelines. Special properties for the customer’s benefit: Excellent cleanability using CIP systems, simple validation Openable filter base provides for good access to the filter internals for cleaning and inspection Easily interchangeable filter plates, with flat, homogeneous filter surfaces for good cleanability and inspection Multilayer and/or conventional filter materials Good drying performance with special agitator design, large heat exchange areas Double mechanical seals, externally interchangeable, dry running contacting or non-contacting lift-off type seals as well as liquid lubricated seals
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BOLZ PROCESS TECHNOLOGY GMBH
Germany
Component for Filter Dryers The multilayer filter plates are supplied according to material requirements and permeability: Fabric (cotton, polypropylene, etc.) Filter elements made from metal Sintered plates Multi-layered plates, sintered Sterile configuration, filter elements are secured from below The existing filter plates for filter dryers can be replaced smoothly and quickly anywhere. This is also possible for machines from other suppliers. According to the customer´s requirement and machine specification the replacement of multilayer filter plates is done completely or separated in different sectors. Multilayers are available in SS 316L or Hastelloy C22 or other materials on request, available porosities 5, 10, 20 or 40 micron, other porosities on request. For machines with a bigger diameter – mainly for chemical specification – the division in different sectors offers, in case of break, the advantage that only the damaged part has to be replaced. This guarantees an...
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
Component for Filter Dryers Containment systems (isolators, also glove boxes) allow for protected taking of samples, discharging of products, packaging the products in cladded barrels or other containers, the discharge of residual heel for a full product yield as well as filter cloth disposal whilst fully protecting the operating staff whereby at the same time a contamination of the product is avoided. The isolator is connected with the aid of a flange around the discharge stopper at the filter dryer.
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
Series CCD (100 - 20,000 liters) The Cylindro Conical Dryer CCD with a central shaft agitator was developed to be used both as a dryer (e.g. for filter cake) and also an evaporator when products have to pass a critical phase change from fully liquid to final bulk solid. The robust mixing element is showing its effective performance also during liquid and high viscous pasty phase to finally achieve the desired solid phase. As a dryer it is designed with a vacuum-/pressure rated vessel, heating jacket and integrated dust filter. Like for the CCM (Cylindro Conical Mixer) also the CCD offers a big advantage with a compact and space saving design. Special properties for the customer’s benefit: Short drying times because all product of the batch is permanently in motion thanks to a heated helix agitator (optional) Uniform heat distribution during the process without cold spots Variable speed of the helix agitator for optimum product quality Useful working volume from 15% to 80% of the...
Request for a quoteBOLZ PROCESS TECHNOLOGY GMBH
Germany
We supply dust filters for dryers, mixers and reactors adhering to FDA and cGMP. These are supplied as complete filter cartridges or filter hoses made from polyamide and metallic fabric in a cylindrical shape, with an anti-static feature and PFE-membrane. Available as a cartridge, element, hose or sack. Please find further informations regarding our custom-made dust filters in the download below.
Request for a quoteResults for
Dryer filters - Import exportNumber of results
10 ProductsCompany type