Displays - Import export

For connection of up to three DK probes with adapter cable CE29 or linear encoder. Equipped with RS-232C function as standard Peak value function, hold function Various input functions especially for automatic measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function

Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function

1 or 2 channel multifunctional display for DT series probes. Perfectly suited for quick and easy measured value evaluation in assembly and production plants. The display has a comparator function with switching outputs for connection to the PLC for fast pass/fail evaluation. The displays can be easily installed in the front panel Measuring modes: ACTUAL, MAX, MIN, P_P Addition and subtraction function: A+B, A-B Comparison function: setting of upper/lower limits; GO / NO GO via NPN open collector output Start/hold function

LT80 multifunction display with interface modules and clearly structured user interface Connection of up to 32 DK or DT probes (DT probes with MT adapter) Easy installation on DIN mounting rail High speed trigger module When connecting an encoder with TTL output pulses to the trigger module, measured values from up to 16 probes can be read out synchronously in dynamic applications The synchronous measurement data can be stored on the LT80 between LT80-NE Display 7-inch touchscreen LCD display for 2 to 16 measurement channels Different measurement modes and measurement functions selectable: Current value, MAX, MIN, P-P, ADD/SUB function, 2 or 4 step comparator function for automated measuring and sorting Display I/O status 3 different interfaces (USB stick, SD card, LAN) for data storage, data transfer and parameterization Different menu languages selectable (English, German, Japanese)

Tank gauges, oil pressure gauges, oil temperature gauges, boost pressure gauges, ammeters and voltmeters for additional installation. All items are from wellknown manufacturers in the field of display instruments

Bus-compatible setpoint indicator for format part or tool change. With  additional status LED for clear indication of the positioning status. Serves for monitored format adjustment aiming at reducing setup times and increasing machine efficiency. Setpoint display with bus interface without measurement of actual value. Large control key to confirm target value. Optimally readable backlit display. Two-line LCD-Display. Integrated RS485 interface, CAN bus as an option. User guidance via bicolor status LEDs. IP53 type of protection, IP65 as an option.

Freely programmable 4-digit measurement display. The measurement information obtained from absolute sensors with analog signal output can be directly evaluated. The display features numerous individual setting options. LED display (1 line of 4 digits). Voltage, current and resistor inputs for length and angle measurement. Free programming via front keyboard. Non-volatile parameter storage (EEPROM). 2 switching outputs (limit-dependent, programmable). Compact design.

Freely programmable measurement display for the representation of incremental and absolute position values. The alpha-numeric display enables the precise representation of measured values as well as the freely selectable representation of length and angle units. High-contrast LCD (1 line of 12 digits). Display of units. Inputs for incremental or absolute encoder (SSI),. Free programming via front keyboard. With reference connection. Option: RS232 or RS485 interface. Option: Switching outputs.

Max. display accuracy 10 μm or 1/64 inch. Repeat accuracy max. ±0.01 mm. Low-power LCD with decimal and fraction-inch function. Reading distance ≤2 mm. Incremental measurement and reset function. Direct reference/offset value input. Battery-buffered memory. Battery operation. MS500H sensor pluggable.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Incremental measurement and reset function. Direct reference/offset value input. Reference input. Works with sensor MS500.

The MA508/1 magnetic display is the optimized successor of the MA508 magnetic display. Now, the magnetic display can be freely programmed via the integrated keyboard, for example for parameters such as resolution or offset.The compact dimensions enable simple constructive integration even under confined installation conditions. The metal housing guarantees durability and robustness. Display accuracy max. 0.01 mm. Repeat accuracy 0.01 mm. Low-power LCD with integrated sensor. Supply via integrated battery with up to 10 years of service life. Freely programmable directly via buttons on the device.

Analog, length and angle measurement Profile MA50: LED display (1 line of 4 digits) Voltage, current and resistor inputs for length and angle measurement Free programming via front keyboard Non-volatile parameter storage (EEPROM) 2 switching outputs (limit-dependent, programmable) Compact design

Freely programmable, compact measurement display. Optionally, the positions of incremental measurement systems or rotary speeds as well as number of pieces can be displayed combined with commercially available initiators or light barriers. Incremental, length, angle, rotational speed or number of pieces measurement. LED display (1 line of 5 digits). Inputs for incremental sensors, length and angle measurement, rotational speed or number of pieces. Free programming via front keyboard. Incremental measurement function (operating mode I), actual value memory (operating modes I and S). With reference connection. Programming enabled via external input (keyswitch). Compact design.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Incremental measurement and calibration function. Direct reference/offset value input. Calibration input. Works with sensor MSA.

incremental Profile MA48: low-cost electronic display LCD with high contrast, 12-digit, dot matrix For incremental measuring systems Freely programmable via front keyboard

Low-cost, freely programmable measurement display for the indication of incremental position values. The alpha-numeric display enables the precise representation of measured values as well as the freely selectable representation of length and angle units. Low-cost electronic display. LCD with high contrast, 12-digit, dot matrix. For incremental measuring systems. Freely programmable via front keyboard.

Incremental, length and angle measurement Profile MA55: LED display (1 line of 5 digits) Input for incremental encoder recognition of the counting direction for length and angle measurement Free programming via front keyboard Non-volatile parameter storage (EEPROM) With reference connection Integrated quadruple evaluation of counting pulses Compact design

Incremental or absolute, length, angle, speed or number of pieces measurement Profile MA10/4: High-contrast LCD (1 line of 12 digits) Display of units Inputs for incremental or absolute encoder (SSI), Free programming via front keyboard With reference connection Optional: RS232 or RS485 interface Optional: Switching outputs

Other versions Profile MA07/1: Incremental, length, angle, rotational speed or number of pieces measurement LED display (1 line of 5 digits) Inputs for incremental sensors, length and angle measurement, rotational speed or number of pieces Free programming via front keyboard Incremental measurement function (operating mode I), actual value memory (operating modes I and S) With reference connection Programming enabled via external input (keyswitch) Compact design

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Lowest-power LCD. Reading distance ≤2 mm. Incremental measurement and reset function. Direct reference/offset value input. Hard-wired sensor.

Freely programmable 5-digit measurement display for the evaluation of incremental measurement information obtained from length and angle sensors. LED display (1 line of 5 digits). Input for incremental encoder recognition of the counting direction for length and angle measurement. Free programming via front keyboard. Non-volatile parameter storage (EEPROM). With reference connection. Integrated quadruple evaluation of counting pulses. Compact design.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. High-contrast LCD, 12-digit LCD dot matrix. Incremental measurement and calibration function. Direct reference/offset value input. Calibration input. Works with sensor MSA. Option: serial interface RS232/RS485. Option: TG01 bench housing.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. High-contrast LCD, 12-digit LCD dot matrix. Incremental measurement and reset function. Direct reference/offset value input. Reference input. Programmable actual-value memory. Works with sensor MS500. Option: serial interface RS232/RS485. Option: 2 measurement channels. Option: TG01 bench housing.

4-row, 7 digits and backlit LCD. Up to three incremental measuring systems. Parameter setting with 4 keys and dial. Each axis is individually programmable. Connection for pluggable magnetic sensors MS100/1 or MS500. System accuracy up to 10 μm. Resolution 1 μm with MS100/1. Speed input measurement as an option. Two accuracy classes: 0.01 mm with magnetic sensor MS100 / 1 or 0.05 mm with magnetic sensor MS500.

Magnetic display MA508SG. Measurement lengths up to 2000 mm. Resolution of 0.1 mm. Maintenance-free backup battery. Long battery life. Easy mounting. Compact design.

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Lowest-power LCD. Metric or decimal-inch indication. Incremental measurement and reset function. Direct reference/offset value input. Battery-buffered memory. Battery operation. MS500H sensor pluggable.

Display accuracy max. 10 μm or 1/64 inch. Repeat accuracy max. ±0.01 mm. Low-power LCD with decimal and fraction-inch function. Reading distance ≤2 mm. Battery-buffered memory. Battery operation. Works with receiver module RTX500.

Display accuracy max. 1 μm. Repeat accuracy max. ±1 μm. High-contrast LCD, 12-digit LCD dot matrix. Incremental measurement and reset function. Direct reference/offset value input. Reference input. Works with sensor MS100/1. Option: serial interface RS232/RS485/switching output. Option: TG01 bench housing.